Chlorpromazine hydrochloride as an analytical reagent : A new indicator for titrations with very dilute ceric sulphate solutions

Chlorpromazine hydrochloride is proposed as an indicator for the microtitration of iron(II), arsenic(III), ascorbic acid and hydroquinone with 0.0005–0.001 N ceric sulphate; the indicator blanks are small. The colorimetric déterminations of μg quantities of cerium(lV) and arsenic(III) using the same reagent are also described.     

利用聚合物乳液合成聚甲基丙烯酸甲酯/二氧化硅纳米杂化材料

通过正硅酸乙酯分别在聚甲基丙烯酸甲酯乳液和四氢呋喃溶液中的溶胶－凝胶反应制备出不同的聚甲基丙烯酸甲酯／二氧化硅复合材料。利用扫描电镜、透镜电镜、差热分析和热失重对试样进行了分析。结果表明，利用聚合物乳液可以获得纳米分散的聚甲基丙烯酸甲酯／二氧化硅复合材料，并且在某种程度上其分散尺度小于利用聚合物溶液获得的复合材料。同时，利用聚合物乳液来制备聚甲基丙烯酸甲酯／二氧化硅杂化材料更有利于凝胶过程中二氧化硅网络的形成。     

Solar Radiation Is Shown to Select for Pigmented Bacteria in the Ambient Outdoor Atmosphere

Abstract— The percentage of pigmented to total bacteria in the outdoor atmospheric population was studied in the field and in controlled laboratory experiments to evaluate the effects of solar radiation (SR) on bacterial survival. The field experiments showed that the percentage of pigmented bacteria positively correlated with SR activity during clear summer days. The percentage was lowest during darkness before dawn and around midnight ( ca 33%) and as the SR increased during the day, gradually increased to a maximum of ca 50–60% at noontime to early afternoon and decreased thereafter. In the laboratory the ambient outdoor atmospheric bacteria impacted on culture plates were exposed to simulated SR and a germicidal light. With increased exposure, more nonpig-mented bacteria were killed and the percentage of pigmented bacteria gradually increased. These observations suggest an inverse relationship between the atmospheric bacterial survival and the percentage of pigmented bacteria contained therein, thus supporting the notion that pigmentation might provide protection for outdoor atmospheric bacteria from sunlight damage. As a consequence, viable pigmented bacteria (and other UV-resistant forms) in the atmosphere could be enriched under areas of stratospheric ozone depletion.     

含氢硅氧烷的硅氢加成反应

含氢硅氧烷的硅氢加成反应师彤，谢择民，王清正（中国科学院化学研究所北京１０００８０）关键词含氢硅氧烷，二乙烯基四甲基二硅氧烷，硅氢加成反应，~1ＨＮＭＲ铂催化硅氢加成的机理~［１，２］、副反应￣［３，４］、聚合物性能￣［３，５］等均有报道，个别文献用粘?..     

Studies of poly-<Emphasis Type="Italic">L</Emphasis>-lysine-starch nanoparticle preparation and its application as gene carrier

Anion starch nanoparticle (StNP) with a diameter of 50 nm was prepared in water-in-oil microemulsion, with soluble starch as raw materials and POCl₃ as crosslinking agent. PLL-StNP was prepared by linking poly-L-lysine (PLL) on the surface of StNP. At the same time, the size of PLL-StNP and its stability in aqueous solution were checked by AFM. The analysis of plasmid DNA binding, DNase I enzymatic degradation, toxicity and transfection were done. We discovered that PLL-StNP may be used as non-virus nanoparticle gene carrier. And we developed the method of preparing PLL-StNP gene carrier and used it in cell transfection. As non-virus gene carrier, PLL-StNP has some advantages, such as large load of DNA, high transfection efficiency, low cell toxicity and biodegradability.     

QSAR models using a large diverse set of estrogens

Endocrine disruptors (EDs) have a variety of adverse effects in humans and animals. About 58,000 chemicals, most having little safety data, must be tested in a group of tiered assays. As assays will take years, it is important to develop rapid methods to help in priority setting. For application to large data sets, we have developed an integrated system that contains sequential four phases to predict the ability of chemicals to bind to the estrogen receptor (ER), a prevalent mechanism for estrogenic EDs. Here we report the results of evaluating two types of QSAR models for inclusion in phase III to quantitatively predict chemical binding to the ER. Our data set for the relative binding affinities (RBAs) to the ER consists of 130 chemicals covering a wide range of structural diversity and a 6 orders of magnitude spread of RBAs. CoMFA and HQSAR models were constructed and compared for performance. The CoMFA model had a r2 = 0.91 and a q2LOO = 0.66. HQSAR showed reduced performance compared to CoMFA with r2 = 0.76 and q2LOO = 0.59. A number of parameters were examined to improve the CoMFA model. Of these, a phenol indicator increased the q2LOO to 0.71. When up to 50% of the chemicals were left out in the leave-N-out cross-validation, the q2 remained significant. Finally, the models were tested by using two test sets; the q2pred for these were 0.71 and 0.62, a significant result which demonstrates the utility of the CoMFA model for predicting the RBAs of chemicals not included in the training set. If used in conjunction with phases I and II, which reduced the size of the data set dramatically by eliminating most inactive chemicals, the current CoMFA model (phase III) can be used to predict the RBA of chemicals with sufficient accuracy and to provide quantitative information for priority setting.     

Selective preconcentration of Au(III), Pt(IV) and Pd(II) on silica gel modified with γ-aminopropyltriethoxysilane

Silica gel functionalized by reaction with γ-aminopropyltriethoxysilane was prepared and its adsorption characteirstics for metal ions were studied. This material selectively removes the Au(III), Pt(IV) and Pd(II) chloro complex ions from sample solutions containing Fe(III) and Cu(II) ions by ion exchange.     

多孔整体固定相的制备与色谱性能

结合连续加料降低聚合体系的放热量,及强化体系的换热能力等措施,实现了无搅拌模式聚合体系中温度分布的均一化。通过单次聚合过程构造了体积为38mL的大体积整体固定相。SEM及孔隙率分布测试证明了整体固定相具有均匀的孔结构,动态容量测定及分离蛋白质的实验,表明所制备的径向流动模式整体柱的容量及分辨率不依赖于流速,同时在高流速下具有低背压的特征,可用于生物大分子的分离制备。     

相转移催化元素硫的歧化反应

本工作将相转移催化(PTC)应用于元素硫歧化反应,大大降低了反应温度,提高了反应速度。该反应被证实与熔态硫在水溶液中的歧化相同,即4S+6OH~-=2S~(2-)+S_2O_3~(2-)+3H_2O。比较了四乙基铵、四丁基铵、十六烷基三甲基铵和三辛基甲基铵四种相转移催化剂及四氯乙烯、二甲苯和四氯乙烷三种溶剂的影响。讨论了本体系相转移催化的证据。为改进以元素硫歧化反应为基础的提取冶金过程提供了依据。     

Formation of (E) 1-alkoxy-1,3-butadienes from corresponding propargyl ethers; vicarious nucleophilic substitution in alkoxyallenes

Propargyl ethers treated with dimsyl anion in DMSO at 80-100°C undergo terminal methylenation to afford corresponding (E) 1-alkoxy-1,3-butadienes. The reaction proceeds via an alkoxy-allene.