Determination of diflubenzuron and chlorbenzuron in fruits by combining acetonitrile‐based extraction with dispersive liquid–liquid microextraction followed by high‐performance liquid chromatography

In this study, a simple and low‐organic‐solvent‐consuming method combining an acetonitrile‐partitioning extraction procedure followed by “quick, easy, cheap, effective, rugged and safe” cleanup with ionic‐liquid‐based dispersive liquid–liquid microextraction and high‐performance liquid chromatography with diode array detection was developed for the determination of diflubenzuron and chlorbenzuron in grapes and pears. Ionic‐liquid‐based dispersive liquid–liquid microextraction was performed using the ionic liquid 1‐hexyl‐3‐methylimidazolium hexafluorophosphate as the extractive solvent and acetonitrile extract as the dispersive solvent. The main factors influencing the efficiency of the dispersive liquid–liquid microextraction were evaluated, including the extractive solvent type and volume and the dispersive solvent volume. The validation parameters indicated the suitability of the method for routine analyses of benzoylurea insecticides in a large number of samples. The relative recoveries at three spiked levels ranged between 98.6 and 109.3% with relative standard deviations of less than 5.2%. The limit of detection was 0.005 mg/kg for the two insecticides. The proposed method was successfully used for the rapid determination of diflubenzuron and chlorbenzuron residues in real fruit samples.     

High-internal-phase-emulsion polymeric monolith coupled with liquid chromatography–electrospray tandem mass spectrometry for enrichment and sensitive detection of trace cytokinins in plant samples

High-internal-phase-emulsion polymers (polyHIPEs) show great promise as solid-phase-extraction (SPE) materials because of the tremendous porosity and highly interconnected framework afforded by the high-internal-phase-emulsion (HIPE) technique. In this work, polyHIPE monolithic columns as novel SPE materials were prepared and applied to trace enrichment of cytokinins (CKs) from complex plant samples. The polyHIPE monoliths were synthesized via the in-situ polymerization of the continuous phase of a HIPE containing styrene (STY) and divinylbenzene (DVB) in a stainless column, and revealed highly efficient and selective enrichment ability for aromatic compounds. Under the optimized experimental conditions, a method using a monolithic polyHIPE column combined with liquid chromatography–electrospray tandem mass spectrometry (LC–MS–MS) was developed for the simultaneous extraction and sensitive determination of trans-zeatin (tZ), meta-topolin (mT), kinetin (K), and kinetin riboside (KR). The proposed method had good linearity, with correlation coefficients (R ²) from 0.9957 to 0.9984, and low detection limits (LODs, S/N?=?3) in the range 2.4–47 pg mL^?1 for the four CKs. The method was successfully applied to the determination of CKs in real plant samples, and obtained good recoveries ranging from 68.8 % to 103.0 % and relative standard deviations (RSDs) lower than 16 %.     

A consensus successive projections algorithm – multiple linear regression method for analyzing near infrared spectra

The successive projections algorithm (SPA) is widely used to select variables for multiple linear regression (MLR) modeling. However, SPA used only once may not obtain all the useful information of the full spectra, because the number of selected variables cannot exceed the number of calibration samples in the SPA algorithm. Therefore, the SPA-MLR method risks the loss of useful information. To make a full use of the useful information in the spectra, a new method named “consensus SPA-MLR” (C-SPA-MLR) is proposed herein. This method is the combination of consensus strategy and SPA-MLR method. In the C-SPA-MLR method, SPA-MLR is used to construct member models with different subsets of variables, which are selected from the remaining variables iteratively. A consensus prediction is obtained by combining the predictions of the member models. The proposed method is evaluated by analyzing the near infrared (NIR) spectra of corn and diesel. The results of C-SPA-MLR method showed a better prediction performance compared with the SPA-MLR and full-spectra PLS methods. Moreover, these results could serve as a reference for combination the consensus strategy and other variable selection methods when analyzing NIR spectra and other spectroscopic techniques.     

Experimental Investigation on Binary Phase Diagram of the Thermotropic Phase Transitions Compounds (n‐CnH2n+1R3)2ZnCl4

The thermotropic phase transitions compounds (n‐C_nH_2n+1R₃)₂ZnCl₄ as well as a series of their binary mixtures were prepared by a solution reflux method from their ethanol solutions. The experimental subsolidus binary phase diagram of [n‐C₁₈H₃₇N(CH₃)₃]₂ZnCl₄‐[n‐(C₁₈H₃₇)₂N(CH₃)₂]₂ZnCl₄ is constructed over the entire composition range by differential scanning calorimetry(DSC) and X‐ray. Experi‐ mental results indicate one stable intermediate phase [n‐C₁₈H₃₇N(CH₃)₃] [n‐(C₁₈H₃₇)₂N(CH₃)₂]ZnCl₄ at W_C18C3Zn %=59.75 %, and two invariant three phase equilibria, which shows two eutectoid temperatures: Te₁ at 310±1 K for eutectoid point W_C18C3Zn %=36.24 %, Te₂ at 313±1 K for eutectoid point W_C18C3Zn %=80.17 %. These three noticeable solid‐solution ranges are α‐phase at the left, ?‐phase at the right, and ψ‐phase in the middle of the phase diagram. It is (n‐C_nH_2n+1R₃)₂ZnCl₄ systems as phase change materials that are characterized the phase transition temperatures T in the range of 310 to 340 K, the transition enthalpies ΔH in the range of 38.40 and 168.72 J/g between two polymorphic forms.     

Development and validation of polymerized high internal phase emulsion monoliths coupled with HPLC and fluorescence detection for the determination of trace tetracycline antibiotics in environmental water samples

A polymerized high internal phase emulsion monolith was used as a novel sorbent for solid‐phase extraction coupled with high‐performance liquid chromatography and fluorescence detection for the determination of oxytetracycline, tetracycline, doxycycline, and chlorotetracycline in environmental water samples. The polymerized high internal phase emulsion monolithic column was prepared by the in situ polymerization of the continuous phase of a high internal phase emulsion containing glycidyl methacrylate, styrene, and divinylbenzene in pipette tips, and then functionalized with iminodiacetic acid. The resulting monolith exhibited highly interconnected porosity and large surface areas, making it an excellent candidate as an solid‐phase extraction sorbent for the enrichment of trace tetracycline antibiotics. Several factors affecting the extraction performance of polymerized high internal phase emulsion monoliths, including the pH of sample solution, the eluting solvents, the sample loading flow rate and volume, were investigated, respectively. Under the optimized conditions, the mean recoveries of oxytetracycline, tetracycline, doxycycline, and chlorotetracycline spiked in pond and farm wastewater samples ranged from 78.1 to 119.3% with relative standard deviation less than 15%. The detection limits (S/N = 3) of the proposed method were in the range of 51–137 pg/mL. This study demonstrated that the monolithic polymerized high internal phase emulsion would be promising solid‐phase extraction sorbents in the extraction and proconcentration of trace analytes from complex samples.     

An improved and practical route for the synthesis of enzalutamide and potential impurities study

An improved and practical synthesis of enzalutamide was accomplished in five steps. Starting from 4-bromo-2-fluoro-benzonic acid, a methyl esterification, Ullmann ligation, methyl esterification, ring closing reaction and final methyl amidation provided the target in 35% total yield with 99.8% purity. Five identified impurities were also synthesized. This efficient and economical procedure avoids the use of highly toxic reagents and multiple recrystallization operations, which is suitable for further industrialization.     

1,4-戊二烯-3-酮肟醚类化合物的合成及生物活性

将1,4-戊二烯-3-酮结构中的羰基转变为肟醚基团,合成了7个1,4-戊二烯-3-酮肟醚类化合物,其结构经1H NMR、13C NMR、IR和ESI-MS表征。生物活性测试结果表明,在药剂浓度为500mg/L时,化合物4c、4f和4g对烟草花叶病毒(TMV)在治疗作用方面的抑制率为49.6%、53.6%和47.4%,与病毒唑(45.2%)相当;化合物4b、4c、4f和4g对TMV在保护作用方面的抑制率分别为57.2%、58.4%、58.9%和59.0%,稍低于病毒唑(61.8%);化合物4a、4b、4c和4g对TMV在钝化作用方面的抑制率分别为95.5%、92.6%、95.0%和89.5%,优于对照药病毒唑(87.9%)。这些结果表明,1,4-戊二烯-3-酮肟醚类化合物对植物病毒表现有良好抑制作用,在其结构基础上进行适当的优化,有望得到具有良好抗植物病毒活性的先导化合物。     

自辐射场下UN2分子的光谱研究

对铀原子和氮原子分别使用相对论有效原子实势和6-311+G(d)基组, 采用优选的密度泛函B3P86方法, 研究了铀本身产生自辐射场(-0.005–0.005 a.u.)作用下UN₂基态分子的能隙E_g和谐振频率ν. 结果表明: UN₂分子在自辐射场中反对称伸缩振动频率ν₃(σ_g)和对称伸缩振动频率σ₁(σ_g)与实验值1051.1 cm^-1和1008.3 cm^-1 基本符合; E_g随自辐射场场强的增大而趋于减少, 占据轨道的电子容易被激发至空轨道而形成激发态; UN₂分子在自辐射场中趋于不稳定, N₂, O₂等更容易扩散到表面内层而腐蚀铀表面, 加剧了铀在自辐射场中的腐蚀.     

时间频率基准装置的研制现状

时间频率基准装置——铯原子喷泉钟, 在标准时间产生和保持、基础物理研究中发挥了重要的作用. 介绍了铯原子喷泉钟的工作原理, 对影响其性能的各项噪声源和频移项给出了分析, 影响频率稳定度性能的主要因素为Dick 效应相关的原子团装载时间、微波激励源相位噪声和探测激光的频率噪声, 影响频率不确定性能主要频移项为: 黑体辐射频移、冷原子碰撞频移、腔相位分布频移和微波泄露频移; 总结和比较了当前具有先进性能的铯原子喷泉钟采用的技术; 介绍了铯原子喷泉钟的主要应用方向、空间冷原子铯钟的研制情况和光学频率原子钟进展.