重稀土高氯酸盐甲基苯甲酰甲基亚砜配合物的合成及Tb3+的发光

合成了重稀土高氯酸盐甲基苯甲酰甲基亚砜配合物RE(ClO4)3·L5·C2H5OH(RE=Gd,Tb,Dy,Tm,Yb;L=C6H5COCH2SOCH3).经元素分析、稀土络合滴定、摩尔电导及热重分析确定了配合物的组成,测定了配体及配合物的IR谱、1H NMR及铽配合物的磷光光谱、荧光激发和发射光谱,根据荧光发射光谱数据计算了铽配合物的各能级值.     

Viscometric properties of dilute polystyrene/dioctyl phthalate solutions

We report viscometric data collected in a Couette rheometry on dilute, single‐solvent polystyrene (PS)/dioctyl phthalate (DOP) solutions over a variety of polymer molecular weights (5.5 × 10⁵ ≤ M_w ≤ 3.0 × 10⁶ Da) and system temperatures (288 K ≤ T ≤ 318 K). In view of the essential viscometric features, the current data may be classified into three categories: The first concerns all the investigated solutions at low shear rates, where the solution properties are found to agree excellently with the Zimm model predictions. The second includes all sample solutions, except for high‐molecular‐weight PS samples (M_w ≥ 2.0 × 10⁶ Da), where excellent time–temperature superposition is observed for the steady‐state polymer viscosity at constant polymer molecular weights. No similar superposition applies at a constant temperature but varied polymer molecular weights, however. The third appears to be characteristic of dilute high‐molecular‐weight polymer solutions, for which the effects of temperature on the viscosity curve are further complicated at high shear rates. The implications concerning the relative importance of hydrodynamic interactions, segmental interactions, and chain extensibility with increasing polymer molecular weight, system temperature, and shear rate are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 787–794, 2006     

TiN/Al2O3纳米多层膜的共格外延生长及超硬效应

采用多靶磁控溅射法制备了一系列具有不同Al2O3调制层厚度的TiN/Al2O3纳米多层膜.利用X射线能量色散谱、X射线衍射、扫描电子显微镜、高分辨透射电子显微镜和微力学探针表征了多层膜的成分、微结构和力学性能.研究结果表明,在TiN/Al2O3纳米多层膜中,单层膜时以非晶态存在的Al2O3层在厚度小于1.5 nm时因TiN晶体层的模板效应而晶化,并与TiN层形成共格外延生长,相应地,多层膜产生硬度明显升高的超硬效应,最高硬度可达37.9 GPa.进一步增加多层膜中Al2O3调制层的层厚度,Al2O3层逐渐形成非晶结构并破坏了多层膜的共格外延生长,使得多层膜的硬度逐步降低.     

高能e+e－湮没强子多重数的质量关系

利用一个描述强子质量谱成功的夸克模型确定出得到的强子多重数普适质量关系〈n〉=aexp(–bm)中的参数b,发现对于介子、重子是一个普适的常数.利用这个质量公式给出计算各种粒子多重数的表达式,进而以高能e⁺e^－湮没为例计算出各种粒子多重数与实验以及其他模型做了比较,表明这个没有任何假定的质量关系同样能够解释实验.     

Robust Bayesian Inference for Seemingly Unrelated Regressions with Elliptical Errors

Bayesian inference is considered for the seemingly unrelated regressions with an elliptically contoured error distribution. We show that the posterior distribution of the regression parameters and the predictive distribution of future observations under elliptical errors assumption are identical to those obtained under independently distributed normal errors when an improper prior is used. This gives inference robustness with respect to departures from the reference case of independent sampling from the normal distribution.     

圆感应同步器数显表检测方法研究

介绍了圆感应同步器数显表测角系统的工作原理,以及在静态和动态测角方法。提出了两种提高动态测量精度的方法。实验数据验证了方法的合理性。     

Some Results behind Dividend Problems

We consider the basic dividend problem of the compound Poisson model with constant barrierstrategy.Some results concealed behind the dividend problem are made explicit in the present work.Differentmethods and some of which are firstly given in this paper.All these results presented certain direct relationshipbetween some important actuary variables in classical risk theory is also revealed.     

聚异丁烯高活性端基含量及相对分子质量测定方法的研究

综合使用核磁，VPO和近红外光谱分析技术对聚异丁烯活性端基含量以及相对分子质量的测定进行了详细研究，分别建立核测定聚异丁烯活性端基含量以及其他烯键含量和近红外光谱快速测量聚异聚丁烯活性端基含量。其他烯键含量和相对分子质量的分析方法。成对t检验结果表明，近红外光谱分析方法测定结果与核磁和VPO方法测定结果之间无显著性差异。     

接枝羧基的有限长碳纳米管电子结构的第一性原理研究

基于局域密度泛函理论，采用第一性原理方法，建立了对(5,5)型和(9,0)型有限长碳纳米管接枝羧基官能团的原子模型，通过计算其电子分布和态密度的变化，讨论羧基官能团对碳纳米管电子结构和电子输运特性的影响. 计算表明，接枝羧基的碳纳米管,其电子结构明显改变，其费米能级上的电子态密度下降；最高占据轨道上的非定域程度减弱,致使电子输运性能呈下降趋势. 关键词： 碳纳米管 密度泛函理论 电子结构     

LaB6在低压强氮气和氦气中的放电特性

 研究了LaB₆在1~10 Pa氮气和氦气中的直流和脉冲放电特性以及放电过程对电极的影响。结果表明，电极直径为5 mm的LaB6氦气放电管在脉冲工作状态下可以长期稳定放电。在脉冲电压为2.2 kV、脉冲宽度10 ms、频率13.3 Hz下，脉冲峰值放电电流超过120 A。氦气放电管在放电过程中，阴极表面有离子的清洗和活化作用，可以使电极的表面逸出功降低，提高放电管的发射能力和稳定性。LaB₆作为气体放电电极具有寿命长、延迟时间短、放电电流大等优点，可用于重复强流脉冲气体放电的高压高速开关器件。