随机参数Duffing系统中的随机混沌及其延迟反馈控制

研究了谐和激励下含有界随机参数Duffing系统(简称随机Duffing系统)中的随机混沌及其延迟反馈控制问题.借助Gegenbauer多项式逼近理论，将随机Duffing系统转化为与其等效的确定性非线性系统.这样，随机Duffing系统在谐和激励下的混沌响应及其控制问题就可借等效的确定性非线性系统来研究.分析阐明了随机混沌的主要特点，并采用Wolf算法计算等效确定性非线性系统的最大Lyapunov指数，以判别随机Duffing系统的动力学行为.数值计算表明，恰当选取不同的反馈强度和延迟时间，可分别达到抑制或诱发系统混沌的目的，说明延迟反馈技术对随机混沌控制也是十分有效的. 关键词： 随机Duffing系统 延迟反馈控制 随机混沌 Gegenbauer多项式     

Multiparametric Evaluation of Dysphonic Severity

SUMMARY: In recent years, the multiparametric approach for evaluating perceptual rating of voice quality has been advocated. This study evaluates the accuracy of predicting perceived overall severity of voice quality with a minimal set of aerodynamic, voice range profile (phonetogram), and acoustic perturbation measures. One hundred and twelve dysphonic persons (93 women and 19 men) with laryngeal pathologies and 41 normal controls (35 women and six men) with normal voices participated in this study. Perceptual severity judgement was carried out by four listeners rating the G (overall grade) parameter of the GRBAS scale. The minimal set of instrumental measures was selected based on the ability of the measure to discriminate between dysphonic and normal voices, and to attain at least a moderate correlation with perceived overall severity. Results indicated that perceived overall severity was best described by maximum phonation time of sustained /a/, peak intraoral pressure of the consonant-vowel /pi/ strings production, voice range profile area, and acoustic jitter. Direct-entry discriminant function analysis revealed that these four voice measures in combination correctly predicted 67.3% of perceived overall severity levels.     

Phenylene vinylene‐based electroluminescent polymers with electron transport block in the main chain

We report a new route for the design of soluble phenylene vinylene (PV) based electroluminescent polymers bearing electron‐deficient oxadizole (OXD) and triazole (TZ) moieties in the main chains with the aryloxy linkage. Both series of the PV‐based polymers were prepared by Wittig reaction. By properly adjusting the OXD and/or TZ content through copolymerization, we can achieve an enhanced balance of hole‐ and electron injections, such that the device efficiency is significantly improved. Light‐emitting diodes fabricated from P1, P2, P3, P4, P5, P6, and P7 with the configuration of Indium–Tin Oxide (ITO)/Poly (styrene sulfonic acid) doped poly (ethylenedioxythiophene) (PEDOT)/polymer/Ca/Al, emit bright green light with the maximum peak around 500 nm. For the device using the optimal polymer (P4) as emitting layer, a maximum brightness of 1300 cd/m² at 20 V and a maximum luminance efficiency of 0.325 cd/A can be obtained. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3469–3478, 2006     

Probing the use of small‐angle light scattering for characterizing structure of titanium dioxide/low‐density polyethylene nanocomposites

Small‐angle light scattering (SALS) measurements were used to study the structure of titanium dioxide (TiO₂)/low‐density polyethylene (LDPE) nanocomposites. The results showed that the scattering from LDPE crystalline structures and the scattering from TiO₂ nanoparticles can be resolved and separated. It is shown that the independent effects of crystallization conditions and the presence of nanoparticle aggregates on the spherulitic structure of the LDPE matrix can be determined by analyzing the scattering patterns using the methods proposed. From the SALS results, we conclude that the nanoparticle surface chemistry affects both nucleation of spherulites and their structure particularly under rapid cooling conditions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1084–1095, 2006     

用好插图事半功倍--浅谈"机械波"的教学

物理插图能起到形象地再现物理情景，辅助解释物理原理的作用．现行人教版物理第二册（必修加选修），第十章“机械波”第一节的知识“波的形成和传播”是该章的重点，本节插图10-5“横波的形成”又是该节的教学重点．这幅插图用得好，直接为后面的波的图像教学及用图像解决问题打下坚实的基础．     

添加助剂的钙钛矿型氧化物NdMO_3上的甲烷氧化偶联——Ⅱ.15% Li_2O/NdMO_3(M=Cr、Mn、Fe、Co、Ni)上的OCM反应研究

在添加了15%Li_2O的NdMO_3(M=Cr、Mn、Fe、Co、Ni)上进行了甲烷氧化偶联(OCM)反应研究.通过改变反应气中CH_4:O_2浓度比,在氧化态和“脱氧态”催化剂上的CH_4脉冲反应,探讨了表面吸附氧和晶格氧在OCM反应中的作用以及NdMO_3中不同金属离子(M)对OCM反应活性的影响等.     

The practice for eight-year operation of the cobalt-60 irradiation facility at Beijing Radiation Application Research Center

The radiation facility was made by Sulzer Company in Switzerland. The designed capacity is 3.7 × 10¹⁶Bq( 1MCi) and 12.21 × 10¹⁵Bq(330kCi)of Cobalt -60 source was loaded at the first phase. Current cobalt -60 source-loading is 2.4 × 10¹⁶Bq(650kCi). The equipment assembling and installation regulating and testing were completed at the end of 1988. The facility was put into commissioning in 1989. It operates 7000–8000 hours per year. The facility has been utilized to carry out many research work and irradiate many kinds of items. Lots of economical benefits have been gained since then. Now it is becoming a radiation processing model base in China. This paper summarized the strong and weak points of the design of the facility through in eight years' practice and analysed the economical benefits.     

激光感生碰撞能量转移的四能级理论模型

首次考虑了两个中间态对激光感生碰撞能量转移的影响，发展了激光感生碰撞能量转移的四能级理论模型，推导出态振幅的运动方程，并给出碰撞截面的近似表达式，通过对Ｅｕ－Ｓｒ和Ｃｓ－Ｓｒ系统的数值计算表明，当频率差│ω２１│大小和│ω４３│可以相比时，利用三能级近似理论就难以获得令人满意的计算结果，而四能级理论模型则适合于任何情况下的激光感生碰能量转移。