甲苯气相选择性氧化制苯甲醛 Ⅰ．V_2O_5／TiO_2－Al_2O_3催化剂研究

制备了一系列负载型Ｖ－Ｔｉ－Ａｌ－Ｏ催化剂并用于甲苯的气相选择性氧化制苯甲醛，考察了接触时间、氧浓度、Ｖ２Ｏ５负载量以及催化剂焙烧温度对反应性能的影响。用ＴＰＲ、ＸＲＤ和ＢＥＴ等测试手段，对催化剂进行了表征。研究发现，催化剂在７７３Ｋ时活化，接触时间１．２秒，氧浓度２１％时，可获得较好的反应结果，Ｖ２Ｏ５负载量为６（ｗｔ）％的催化剂，在５９３Ｋ时反应，得到了转化率２０．５％，苯甲醛产率８．３％的最好结果。     

磷钨钼钒杂多蓝光度法测定钼的探索

本文研究了磷钨钼钒四元杂多酸及其还原产物杂多蓝的形成条件、光度性质、组成和在测定高速钢中高钼的应用。试验表明,磷钨钼钒杂多蓝光度法测定钼具有新颖性、高选择性、较高准确性和简便性,适于高速钢中>1％Mo的测定。     

碳酸氢铵沉淀法制备氧化钇粉体时反应条件对产物粒度的影响

研究了碳酸氢铵沉淀法的反应条件对氧化钇粒度的影响,探讨了粒度变化规律。发现在沉淀反应中,晶型碳酸钇铵的形成与否是影响氧化钇粒度的关键因素。在较低的反应温度下,当碳酸氢铵和氯化钇的浓度大于0.25mol·L-1,摩尔比大于5,陈化时间大于60min时得到碳酸钇铵沉淀,经煅烧可获得粒度(D50)大于1μm的氧化钇。当反应物浓度较低、摩尔比小,陈化时间较短时得到无定型碳酸钇沉淀,煅烧沉淀可获得粒度(D50)小于0.5μm的氧化钇。实验证明选择适当的沉淀反应条件,可制备D50在0.3～10μm范围内的不同粒度级别的氧化钇粉体。     

Effects of polymer architecture and composition on the adhesion of poly(tetrafluoroethylene).

Poly(glycidyl methacrylate), PGMA, chains in linear and arborescent structures were incorporated onto surfaces of poly(tetrafluoroethylene), PTFE, films by hydrogen plasma and ozone treatment and atom transfer radical polymerization. The epoxide groups of the PGMA chains were further reacted with acetic acid (AAc), oxalic acid (XAc), allyl amine (AA), and ethylenediamine (EDN) to introduce hydroxyl and amine groups to the surfaces of the PTFE films. Surface characterizations performed by Fourier Transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy and X-ray photoelectron spectroscopy (XPS) confirmed the surface modification and the chemical structure. The PGMA chains in arborescent structures show a high effectiveness for the enhancement of the adhesion of PTFE films. The adhesion of PTFE films was also significantly enhanced by ring-opening reactions of the PGMA epoxide groups with acetic acid and amine compounds. A high value of 9.5 N cm(-1) in the optimum 180 degrees peel strength test was observed with PTFE/copper assemblies.     

毛细管电泳质谱联用技术及其应用

本文介绍了用于毛细管电泳质谱联用仪器的多种接口技术，描述了ＣＺＥ，ＣＩＥＦ，ＣＧＥ，ＭＥＫＣ和ＣＩＴＰ等毛细管电泳技术和四极质谱，离子阱质谱，傅 叶变换离子回旋共振质谱，飞行时间质谱，磁质谱，解吸质谱等联用的现状及发展前景，对近年来ＣＥ－ＭＳ在酶解产物。蛋白质和肽，核苷酸，药物及代谢产物等领域中的应用作了详细述评。     

Synthesis of bridged heteroaromatic compounds as reference standards for coal degradation products

The synthesis of 2-naphthyl 2′-dibenzothienyl ether, 1-(1′-naphthyl)-2-(4″-acridinyl)ethane and a series of naphthylethyldibenzothiophenes is reported.     

Preparation and catalytic performance of superfine Ni/BaTiO3 catalyst

Superfine Ni/BaTiO₃ catalysts were prepared by impregnation method and used successfully for CO₂ reforming CH₄ to syngas. The effects of preparation method and the temperatures of calcination, reduction and reaction on the catalytic activity of the Ni/BaTiO₃ system were investigated. This revised version was published online in June 2006 with corrections to the Cover Date.     

Synthesis of a novel methacrylic monomer iniferter and its application in surface photografting on crosslinked polymer substrates

(Methacryloyl ethylenedioxycarbonyl) benzyl N,N‐diethyldithiocarbamate (HEMA‐E‐In) was synthesized and used as a monomer iniferter to develop a novel, photopatternable grafting technology. This molecule functions as both a methacrylic monomer and a photoiniferter (photoinitiator–transfer agent–terminator). The structure of HEMA‐E‐In was characterized by ¹H NMR, Fourier transform infrared, and ultraviolet–visible spectroscopies. In the presence of the monomer iniferter, methyl methacrylate was polymerized by exposure to 365‐nm ultraviolet radiation, confirming the initiation capability of HEMA‐E‐In. After the copolymerization of HEMA‐E‐In into a methacrylate‐based polymer, attenuated total reflectance Fourier transform infrared spectra revealed that the photoiniferter functionality was present at the surface of this polymeric substrate. Photografting of poly(ethylene glycol) monomethacrylate monomer from the surface caused a significant change in the hydrophobicity of the surface as demonstrated by contact angle measurements. The novel monomer photoiniferter HEMA‐E‐In initiates the polymerization of bulk monomer and provides a reactive functionality that facilitates further initiation and polymer modification by the polymerization of different monomers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1885–1891, 2002     

关于静电作用对酶活性部位残基pKa影响的定量计算

随着基因技术的发展,人们几乎已经可以任意替换蛋白质序列中的特定残基。由于理论上对蛋白质性能的预测工作还远远跟不上实验的发展,只能花费大量的人力、物力利用实验方法筛选突变体。这就迫切需要建立一套能够正确预测蛋白质性质的方法。静电作用在酶促反应中起到了重要作用。基于表面带电残基对酶活性部位残基pK_α的影响,可利用替换表面残基的方法改变酶促反应随pH的变化趋势,是蛋白质工程研究中的一种有效方法。由于表面极性残基处于高介电常数的溶剂(水)与低介电常数的蛋白质的界面上,对此问题尚未有圆满的理论方法进行解决。我们利用Kirkwood理论定量地表述了表面荷电残基的替换对酶活性部位残基pK_α的影响,为研究酶突变体的性质,如突变体的电化学性质、酶催化反应随pH变化趋势的改变,酶专一性的改变等提供了一种简便的方法。