Diagramme polythermique du systeme ternaire H2O—Al(NO3)3—Mg(NO3)2

The solid—liquid equilibria of the ternary system H₂O—Al(NO₃)₃—Mg(NO₃)₂ were studied at –30, –20, –10 and 0°C by using a synthetic method which allows to detemine all the characteristic points of isothermal sections. The stable solid phases which appear are respectively: ice, Al(NO₃)₃·9H₂O, Mg(NO₃)₂·9H₂O and Mg(NO₃)₂·6H₂O. Neither double salts nor mixed crystals are observed in the temperature and composition field studied. Polytherm diagram layout show two invariant transformations correspond with an eutectic point and a peritectic point.This revised version was published online in November 2005 with corrections to the Cover Date.     

塞曼石墨炉原子吸收光谱法测定粉尘降尘中痕量锡

以KOH熔样,又以KOH作基体改进剂,研究了测定锡的灰化温度、原子化行为和消除干扰及试样前处理的方法,以KOH熔解的粉尘及降尘样液,特别适用于塞曼石墨炉的测定,背景可完全扣除。方法简便、快速、准确,灵敏度和精度高。相对标准偏差为4.0%,回收牢在96.4～110%范围内。     

仓库容量有限条件下的一类存贮管理模型

建立了一类仓库容量有限条件下存贮管理决策模型 ,给出最优存贮策略 .     

In situ observation of NaBi(WO4)2 dendrite growth and the study on microstructure of solidification

The dendrite growth process of transparent NaBi(WO4)2 with small prandtl and high melting point was studied by using the in-situ observation system. According to the dynamic images and detailed information, there are two kinds of restriction effect on the dendrite growth, the competition between arms and branches and the convection in the melt. The dendrite growth rate was time dependent, and the rate of arm growth reached the maximum 5.8 mm/s in the diffusive-advective region and rapidly decreased in the diffusive-convective region. The growth rate of branch had the same change trends as the arm's. Based on the EPMA-EDS data of solidification structure of quenched NaBi(WO4)2 melt, it was found that there were component differences from stoichiometric concentration in the melt near the interface during the growth process.     

脉冲时滞抛物型偏微分方程组解的振动性

研究一类脉冲时滞抛物型偏微分方程组解的振动性,利用一阶脉冲时滞微分不等式获得了该类方程组在两类不同边值条件下所有解振动的若干充分条件.所得结果充分反映了脉冲和时滞在振动中的影响作用.     

石墨-六角氮化硼微晶混合物与水高压反应产物分析

 利用球磨法制备石墨-六角氮化硼微晶混合物，并在6.1 GPa、800~1 500 ℃条件下与水进行高压反应，以便研究用水作触媒合成B-C-N三元化合物的可能性。通过对反应产物的XRD、XPS谱分析发现：高压下随着温度的升高，反应产物中出现再结晶石墨，其晶化程度逐渐提高；但没有出现再结晶六角氮化硼，也未出现立方氮化硼。在球磨不充分条件下，石墨-六角氮化硼混合物的XRD谱没有完全弥散，它们与水高压反应时，能观察到石墨与立方氮化硼分别结晶的现象，但都没有形成B-C-N晶化结构。     

物理实验课程考核、评估体系初探

对物理实验课程考核、评估方法进行了探讨，提出了物理实验课程考核、评估体系及实施细则．重点介绍了体系中的核心部分——正规的物理实验课程考试．     

Squeezed states and uncertainty relations since 1991

A brief review of the history of ten workshops/conferences on “Squeezed States and Uncertainty Relations” and main achievements in the related fields of quantum physics for the period from 1991 to 2007 are presented.     

混合方次的Waring——Goldbach问题

研究混合方次的Waring--Goldbach     

微纳米加工技术在纳米物理与器件研究中的应用

物质在纳米尺度下可能呈现出与体材料不同的物理特件，这正是纳米科技发展的基础之一。要想探索在纳米尺度下材料物埋性质的变化规律及可能的应用领域，离不开相应的技术手段，微纳米加工技术作为当今高技术发展的重要技术领域之一，是实现功能人工纳米结构与器件微纳米化的基础。本文根据几个不同的应用领域，介绍了微纳米加工技术在纳米物理与器件研究领域的应用。