基于三维静电势参数研究C60溶解性的构效关系

在量子化学从头算基础上,对一系列溶剂化合物分子进行了结构优化和三维静电势参数计算,运用多元线性回归分析和神经网络方法对C60在121种不同溶剂的溶解性与计算的结构参数进行了构效关系研究.用建立起来的QSPR 关系式对15种不同结构类型溶剂进行了预测,并阐述了C60溶质与不同溶剂之间的相互作用,获得了满意的结果.     

镓在裸Si系和SiO2/Si系掺杂效应

Based on the diffusion action of gallium in silicon and SiO2 ,a diffusion model of gallium doping in bare silicon system and SiO_2/Si system is first presented in this paper ,the gallium doping effect in the two systems is analyzed theoretically. Experiments and applications have proved that the use of the open-tube gallium deffusion in SiO2/Si system can substantially improve diffusion quality and device characteristics .     

Positron/positronium annihilation in nanocrystalline silicon thin films

Positron and positronium annihilation investigations were applied to nanocrystalline silicon (nc-Si) thin films, for the first time. The nc-Si thin films with average grain diameters of 3–5 nm show intense blue luminescence at room temperature. The nanometer-sized Si crystallites formed in amorphous Si (a-Si) matrix give rise to this luminescence. Very highS-parameters up to 0.62 were observed in the as-grown a-Si thin film suggesting positronium formation in the a-Si layer. The average lifetime of the positrons in the a-Si was determined to be about 520 ps. TheS-parameters dropped significantly to 0.53 by crystallization of the thin film at 800 °C for 10 seconds, which was almost the same to the value observed in bulk Si (100) substrate. Further crystallization from 60 seconds to 1 hour showed smaller change in theS-parameters than that from the a-Si to 10 seconds. The large change in theS-parameters due to the annealing might be caused by the formation of Si nanocrystallites in a-Si matrix suggesting that positron is a sensitive probe for structural investigations of the nc-Si materials.     

溶液还原法制备球形超细镍粉

超细镍粉由于表面活性高、导电性和导热性好而被广泛应用于化学催化剂、烧结活化剂、导电浆料门等方面．目前，制备超细镍粉的方法主要有问：真空蒸馏冷凝法、机械粉碎法、电解法、羰基镍热分解法、浆化氢还原法和溶液还原法等．在这些方法中，溶液还原法的工艺简单，所得粉末纯度高，颗粒尺寸小且分布均匀[3]．法国的Figlarz等[4]用弱有机还原剂乙二醇还原粒径小干0．1μm的Ni（OH）2。超细粉末，引入AgNO3。作为成核剂后，制得了粒径＜1μm的超细镍粉，但这种方法需长时间高温回流反应，对原料要求苛刻，且采用有机分散介质成本较高，…     

SAPO-5分子筛骨架结构研究

SAPO-5分子筛的骨架是由PO_4~-、AlO_4~-和SiO_4四面体构成.可以看作是硅同晶置换AlPO_4-5分子筛骨架上的磷或铝而得到,其取代方式可以通过三种可能的途径实观;(1)Si 取代Al;(2)Si 取代P;(3)两个Si 等同取代一个P 和一个Al.由于取代方式的不同,将导致骨架TO_4(T=P、Al,Si)的连接方式的不同,因此Si 在SAPO-5分子筛骨架中的存在状态是人们十分关注的问题.目前这方面的研究工作都采用固体核磁共振的方法,并且认为合成条件的不同其取代机理也不相同.本工作用~(31)P 和~(29)Si 固体高分辨核磁共振技术结合电子探针和光电子能谱方法对HF 参与下得到的SAPO-5分子筛骨架构成进行了系统的研究.     

Microwave assisted hydrothermal synthesis of tin niobates nanosheets with high cycle stability as lithium-ion battery anodes

SnNb₂O₆ and Sn₂Nb₂O₇ nanosheets were synthetized via microwave assisted hydrothermal method, and innovatively employed as anode materials for lithium-ion battery. Compared with Sn₂Nb₂O₇ and the previously reported pure Sn-based anode materials, the SnNb₂O₆ electrode exhibited outstanding cycling performance.     

Synthesis and Characterization of p—[Perfluoro—1—（2—fluorosulfonylethoxy）]ethylated Polystyrene

A new fluorinated polystyrene bearing a p-sulbstiuted perfluoro[1-(2-fluorosulfonylethoxy)]ethyl group was synthesized via one-electron oxidation of polystyrene by perfluoro[2-(2-fluorosulfonylethoxy)]propionyl peroxide at different peroxide to polystyrene molar ratios.The yield of perfluoroalkylation decreases with the increase of the reactant molar ratio.The modified polymer has been characterized by various techniques:the ring pefluoro[1-(2-fluorosulfonylethoxy)]ethylation has been proved by FT-IR and ^19FNMR;the X-ray photoelectron spectra(XPS) show the maximum binding energy of F18,O18,C18(two kinds of carbon atoms,namely C-H and C-F)and S2p,respectively; desulfonylation of the fluorinated polystyrene appearing at 217℃ has been found by its thermogravimetric analysis (TGA).The determinations of contact angle,refractive index and glass transition temperature of the modified polymer have disclosed that when the contact angle increases with the increase of the molar ratio,the refractive index and glass transition temperature decrease.The polydispersity values indicate that the degradation of the polymer chains did not occur during the reaction.     

Novel fragmentation of N-diisopropyloxyphosphoryl dipeptides and tripeptides by fast atom bombardment mass spectrometry

Positive ion fast atom bombardment mass spectrometry of N-diisopropyloxyphosphoryl dipeptides and tripeptides showed a novel cleavage pattern in that only the N-phosphoryl fragment ions gave intense peaks while the C-terminal series of ions was suppressed. The base peak was the N-phosphoryl imino ion responding to the N-terminal residue. These advantages are superior to those of other types of N-protecting groups.     

2]Catenane assembly from calix[4]arene crown ethers [In Process Citation

A variety of novel calix[4]arene-incorporating crown ethers with or without intramolecular hydrogen bonding have been prepared by two efficient methods and utilized as donor rings to assemble calix[4]arene [2]catenanes based on pi-stacking interaction between hydroquinone and bipyridinium units. Treatment of calix[4]arene crown ethers 4, 10a, or 10b, whose cone conformation was fixed by intramolecular hydrogen bonding within the calix[4]arene moiety, with dicationic salt 15 x 2PF6 and dibromide 16 afforded the corresponding [2]catenanes 17a x 4PF6, 17b x 4PF6, and 17c x 4PF6 in 20%, 53%, and 55% yields, respectively, whereas from the reactions of 15 x 2PF6 and dibromide 16 in the presence of conformationally flexible 11 or 12 with a cone conformation kept by two propyl groups, [2]catenanes 18 x 4PF6 and 19 x 4PF6 were obtained in 12% and 6% yields. [2]Catenanes 21a x 4Cl, 21b x 4Cl, and 21c x 4Cl, incorporating calix[4]arene in both the donor and acceptor rings, were also successfully assembled from 10a or 10b, 16, and dicationic salts 20a x 2PF6 or 20b x 2PF6. The dynamic 1H NMR and absorption spectra of the [2]catenanes have been investigated, which revealed a strongest donor-acceptor interaction in 17a x 4PF6 and that the cone [2]catenanes 17a-c x 4PF6 can isomerize to the partial cone isomer at high temperature. The difference of the dynamic properties of these catenanes was discussed. The results demonstrate that catenation is one new general method to change the conformational distributions of calix[4]arenes.     

Fe(bpb)(CN)2]- as a versatile building block for the design of novel low-dimensional heterobimetallic systems: synthesis, crystal structures, and magnetic properties of cyano-bridged Fe(III)-Ni(II) complexes [(bpb)(2-) = 1,2-bis(pyridine-2-carboxamido)benzenate

A dicyano-containing [Fe(bpb)(CN)2]- building block has been employed for the synthesis of cyano-bridged heterometallic Ni(II)-Fe(III) complexes. The presence of steric bpb(2-) ligand around the iron ion results in the formation of low-dimensional species: five are neutral NiFe2 trimers and three are one-dimensional (1D). The structure of the 1D complexes consists of alternating [NiL]2+ and [Fe(bpb)(CN)2]- generating a cyano-bridged cationic polymeric chain and the perchlorate as the counteranion. In all complexes, the coordination geometry of the nickel ions is approximately octahedral with the cyano nitrogen atoms at the trans positions. Magnetic studies of seven complexes show the presence of ferromagnetic interaction between the metal ions through the cyano bridges. Variable temperature magnetic susceptibility investigations of the trimeric complexes yield the following J(NiFe) values (based on the spin exchange Hamiltonian H = -2J(NiFe) S(Ni) (S(Fe(1)) + S(Fe(2))): J(NiFe) = 6.40(5), 7.8(1), 8.9(2), and 6.03(4) cm(-1), respectively. The study of the magneto-structural correlation reveals that the cyanide-bridging bond angle is related to the strength of magnetic exchange coupling: the larger the Ni-N[triple bond]C bond angle, the stronger the Ni- - -Fe magnetic interaction. One 1D complex exhibits long-range antiferromagnetic ordering with T(N) = 3.5 K. Below T(N) (1.82 K), a metamagnetic behavior was observed with the critical field of approximately 6 kOe. The present research shows that the [Fe(bpb)(CN)2]- building block is a good candidate for the construction of low-dimensional magnetic materials.