Preparation and Mechanical Properties of Fe3Al Nanostructured Intermetallics

Nanostructured Fe₃Al intermetallic compounds were produced by using hydrogen arc plasma method. The transmission electron microscopy experiments showed that the average particle size of the as-synthesized was about 40-nm. The change in hardness of Fe₃Al nanostructured intermetallic compounds with annealing temperatures was observed and evaluated.     

Anchoring Properties of Nematic Liquid Crystals Studied Using the Attenuated Total Reflection Method

By using the attenuated total reflection method associated with the excitation of surface plasmons, the tilt angle of the liquid crystal director and its gradient at the surface are measured in a planar nematic cell as a function of the applied voltage. The surface anchoring anisotropy δπ of the liquid crystal and the surface elastic constant k_s, are found to be δπ = 0.288 erg/cm and k_s, = 9·12 × 10^-11 erg, respectively, when the boundary condition suggested by Barbero et al is used. The theoretical and experimental values obtained with this boundary condition and that of Mada are discussed. The results show that the boundary condition proposed by Barbero et al is in better agreement with the experiment.     

Entangling Two Multi-atomic Clusters Through a Cavity Field

Two atomic clusters, which have NA and Ns two-level atoms, respectively, are placed in a cavity but separated spatially. There is no direct interaction between the atoms. All the atoms interact with a single-mode of the cavity field. Quantum entanglement between the two atomic clusters is investigated for various initial states of the two atomic clusters and the field. When the cavity field is initially in a Fock state, we find that the time evolution of entanglement quasi-periodically oscillates regardless of the initial states of atoms. The oscillation period increases as the initial photon number increases. When all the atoms in both of the atomic clusters are initially in the excited state, we show that there is no entanglement between the atomic clusters with NA = NB = 1 regardless the initial state of the cavity field. However, when either NA or NB is larger than one, we find that the entanglement always exists even for a strong thermal field. In cases with different initial states of the atomic clusters, we notice that the entanglement becomes stronger as number of the atoms increases. When all the atoms in both of the clusters in the ground state, we also find that the entanglement can be enhanced even by a thermal field. We also notice that a single qubit can be entangled with multi-atoms which are initially in the ground state by the cavity field initially being in vacuum, thermal, coherent, and squeezed states.     

Positive Solutions of a Class of Quasilinear Elliptic Equations in Two-dimensional Exterior Domains

Sufficient conditions for the existence of positive solutions to a class of quasilinear elliptic equations in two-dimensional exterior domains are given.     

氧离子激发光谱的精密测量

在2×1.7串列加速器上利用束-箔方法和装有CCD的Spectrapro-500i光谱单色仪的测量装置，在2MeV束能下研究了250nm—350nm波长范围离化态氧原子光谱.在250nm—350nm范围已确定的201条光谱线，确定的跃迁大部分属于OⅡ到OⅣ原子的n，l能级间的跃迁，一些实验结果与现有理论一致.实验发现，在这个范围的光谱大都属于弱跃迁谱线，并且许多谱线是以前没有观测到的. 关键词： 串列加速器 氧离子 CCD 光谱     

Isolation and Characterization of Proteins Interacting with Activin Type Ⅱ Receptors

Introduction Activinisamemberofthetransforminggrowth factor(TGF)βsuperfamilyofextracellularsignaling proteins.Themembersofthisfamilyplayacriticalrole duringembryogenesisandinmaintainingtissuehomeo stasisinadultlife[1—3].DeregulatedTGFfamilysigna lingisi…     

用于近场集成光学头微透镜器件的灰度掩模技术

讨论了制作适用于近场集成光学头中的凸形、凹形微透镜和折衍射复合微透镜的灰度掩模技术。定性地给出了与几种典型的凸形、凹形微透镜和折衍射复合微透镜对应的灰度掩模版的设计实例 ,以及将它应用于光刻操作的情况 ,为采用灰度掩模技术制作适用于近场集成光学头中的微透镜器件奠定了基础。灰度掩模技术在微透镜器件的制作方面具有重要的应用前景 ,有助于简化制备工艺 ,降低制作成本 ,优化微透镜阵列的结构参数。     

A completion of the spectrum for large sets of disjoint transitive triple systems

In this paper, we give a recursive construction from an LTTS(v + 2) to an LTTS(16v + 2) for v 3. Furthermore, the existence of LTTS(2ⁿ + 2) is proved. Thereby, we completely solve the existence problem of LTTS)(v) (large set of pairwise disjoint transitive triple systems of order v).     

Differential determination of arsenic(III) and total arsenic using flow injection on-line separation and preconcentration for graphite furnace atomic absorption spectrometry

Arsenic(III) can be quantitatively extracted using sodium diethyldithiocarbamate (NaDDTC) as the complexing agent and C18 reversed phase packing as the column material for solid phase extraction. Arsenic(V) must be reduced to its trivalent oxidation state prior to extraction. A mixture of sodium sulphite, hydrochloric acid, sodium thiosulphate and potassium iodide was found to be optimum for on-line reduction. When the sorbent extraction is carried out without and with the addition of the reduction mixture, arsenic(III) and total arsenic can be determined sequentially by graphite furnace atomic absorption spectrometry with detection limits (3 σ) of 0.32 ng for As(III) and 0.43 ng for total arsenic. A 7.6-fold enhancement in peak area compared to direct injection of 40 μl samples was obtained after 60 s preconcentration. Results obtained for sea water standard reference materials, using aqueous standards for calibration, agree well with certified values. A precision of 5.5% RSD was obtained for total arsenic in a sea water sample (1.65 As). Results obtained for synthetic mixtures of trivalent and pentavalent arsenic agreed well with expected values.     

Multi-cracks problem for piezoelectric materials strip subjected to dynamic loading

This paper analyses and models the dynamic interaction among permeable multi-cracks in a piezoelectric strip under anti-plane shear waves by the Schmidt method. The Fourier transform is applied and then two pairs of triple integral equations can be solved using the Schmidt method. The results show that the stress and the electric displacement intensity factors of cracks depend on not only the crack length and the piezoelectric coefficient, but also the thickness of the piezoelectric strip, the distance between multi-cracks and the frequency of incident wave.