Preparation and Mechanical Properties of Fe3Al Nanostructured Intermetallics

Nanostructured Fe₃Al intermetallic compounds were produced by using hydrogen arc plasma method. The transmission electron microscopy experiments showed that the average particle size of the as-synthesized was about 40-nm. The change in hardness of Fe₃Al nanostructured intermetallic compounds with annealing temperatures was observed and evaluated.     

铽－甲基吲哚乙酰丙酮三元配合物发光过程研究

测定和分析了ＲＥ．Ｌ１．Ｌ２（ＲＥ＝Ｔｂ（Ⅲ）、Ｇｄ（Ⅲ），Ｌ１＝３Ｍ（３甲基吲哚－１－乙酰基丙酮），Ｌ２＝ＴＰＰＯ、Ｐｈｅｎ、Ｄｉｐｙ）三元配合物的荧光光谱、磷光光谱、磷光寿命及变温荧光光谱等．讨论了Ｔｂ（Ⅲ）与配体之间的能级匹配和Ｌ１与Ｌ２的三重态之间传能的问题，说明了影响这些三元配合物荧光效率的主要因素及其发光过程．     

希土Eu(Ⅲ)与2-丙酰-茚满二酮-1,3的二元、三元配合物的合成、表征及发光性能研究

合成2-丙酰-茚满二酮-1,3及其Eu(Ⅲ)的二元、三元固态配合物,经化学分析、元素分析确定了配合物的化学组成,通过红外光谱、紫外光谱进行表征,用配合物的荧光光谱和配体低温磷光光谱分析了配合物的荧光强度和能有效发光的原因.     

非离子表面活性剂Brij35胶束体系中α-溴代萘的室温燐光

建立了非离子表面活性剂Ｂｒｉｊ３５胶束介质中α－溴代萘的燐光分析法，并与十二烷基 硫酸钠ＳＬＳ体系作了比较。方法特点如下：α－溴代萘在低浓度的Ｂｒｉｊ３５胶束溶液中即产生 ＲＴＰ发射，具有良好的分析特性。甲醇、乙醇等的加入，体系不会使燐光达到稳定的时间增长，测量操作简便。ＴｌＮＯ３的存在使背景降低，精密度提高。Ｂｒｉｊ３５体系比 ＳＬＳ体系具有较大 的粘度，较小的丙酮猝灭影响。     

Interface characteristics in diffusion bonding of Fe3Al with Cr18-Ni8 stainless steel

Fe3Al and Cr18-Ni8 stainless steel were diffusion-bonded in vacuum and a Fe3Al/Cr18-Ni8 interface with reaction layer was formed. Microstructure in the reaction layer at Fe3Al/Cr18-Ni8 interface was analyzed by means of scanning electron microscope (SEM) and electron probe micro-analyzer (EPMA). The growth of reaction layer with heating temperature (T) and holding time (t) was researched. The results indicate that FeAl, Fe3Al, Ni3Al, and alpha-Fe (Al) solid solution are formed in the reaction layer. These phases are favorable to promote the element diffusion and to accelerate the formation of the reaction layer at Fe3Al/Cr18-Ni8 interface. The growth of reaction layer obeys the parabolic law and its thickness (X) is expressed by X2 = 7.5 x 10(-4)exp(-83.59/RT)(t - t0).     

氮原子在Ni平坦和缺陷表面上的吸附和振动

 构造了氮－镍相互作用的5－参数Morse势，研究了氮原子在Ni（\r\n100），Ni（110）和Ni（111）平坦表面的吸附和振动，获得了氮原子\r\n在三个低指数表面的吸附位、吸附构型、结合能和本征振动等数据，计\r\n算结果与实验结果非常吻合．同时，与Ni（100）表面对比，系统研究\r\n了氮原子在Ni（510）台阶面的吸附和扩散．计算结果表明，氮原子在\r\n台阶下部形成最稳定的吸附态，台阶对下台面上扩散的氮原子形成捕获\r\n势，对上台面上扩散的氮原子形成反射势．     

α-异丙基、β-异丁基丙烯酸希土配合物的合成和配位性质研究

本文制备了α-异丙基、β-异丁基丙烯酸的15种希土配合物RE(C₉H₁₇COO)₃,用X射线多晶粉末衍射、电子光谱、红外光谱和热重差热分析方法研究了配合物中RE-O键的成键性能以及羧基的配位性质.配合物中存在两种不同的羧基配位形式,轻中希土配合物(La,Ce,Pr,Nd,Sm,Eu)中羧基具有不对称桥式双齿配位形式,而重希土配合物(Gd,Tb,Dy,Ho,Er,Tm,Yb,Lu,Y)中羧基具有对称螯合双齿配位形式,配位形式的不同使得希土配合物呈现两种不同的多晶衍射图和热分解过程.     

Synthesis, characterization and thermal analysis of polyaniline/ZrO2 composites

Conducting polyaniline-zirconium dioxide (PANI/ZrO₂) composites were synthesized by ‘in situ’ deposition technique in the presence of hydrochloric acid (HCl) as dopant by adding the fine grade powder (average particle size of approximately 20 nm) of ZrO₂ into the polymerization reaction mixture of aniline. The composites obtained were characterized by infrared spectra (IR) and X-ray diffraction (XRD) and thermogravimetric analysis (TGA). TG curves and DTG curves of the composites suggest that the thermal degradation process of PANI/ZrO₂ composites proceeds in two-steps and the composites are more thermally stable than that of the pure PANI. The improvement in the thermal stability for the composites is attributed to the interaction between PANI and ZrO₂, which restricts the thermal motion of PANI chains and shields the degradation of PANI in the composites.     

用化学除氧技术以1,2-二溴乙烷作重原子微扰剂-β-环糊精诱导室温燐光法测定4种痕量多环芳烃

本文首次将亚硫酸钠化学除氧技术应用于β－环糊精诱导室温燐光（β－CD－RTP）法中，除氧简便快速（1～1．5min），测定了痕量二氢苊、芴、菲、7，8－苯并喹啉。1，2－二溴乙烷作重原子微扰剂，其用量减少到每10mL中5μL，体系基本澄清，pH≈6．8，分析特性优于通氮除氧技术所得结果。     

石墨炉原子吸收法测定钒的研究

本文比较了在标准石墨管,热解涂层和全热解石墨管中钒的吸收信号形状。用全热解石墨管和EDTA铵盐作基体改进剂,直接测定水系沉积物中痕量钒。方法的特征量为61pg/0.0044A。