ON THE CONVERGENCE OF THE RELAXATION METHODS FOR POSITIVE DEFINITE LINEAR SYSTEMS

1.IntroductionTheclassicaliterativemethods,suchastheJacobimethod,theGauss-SeidelmethodandtheSORmethod,aswellastheirsymmetrizedvariants,playanimportantroleforsolvingthelargesparsesystemoflinearequationsInaccordancewiththebasicextrapolationprincipleofthelineariterativemethod,Hadjidimos[1]furtherproposedaclassofacceleratedoverrelaxation(AOR)methodforsolyingthelinearsystem(1.1)in1978.Thismethodincludestwoarbitraryparameters,andtheirsuitablechoicesnotonlycannaturallyrecovertheJacobi,theGauss-S…     

球幕投影光学系统的设计与研究

设计了一种飞行训练使用的球幕投影仪光学系统.系统焦距为5.5mm, 相对孔径为1/4,全视场角175°,光谱范围为可见光波段,采用了3组10片的反远距型结构.与普通投影系统不同之处在于,该系统在保证大视场的前提下有效地减小了场曲对像质的影响.给出了球幕结构对场曲影响的定量分析以及较为方便的屏幕半径选择方法.因全部采用国产玻璃而同时满足了国产化的要求.     

紫外光激发下氧化锌纳米线的发光特性研究

室温条件下，用355 nm的激光激发氧化锌纳米线，测量了其发光光谱.观察到半宽度较小、峰值波长约382 nm的紫光峰和半宽度较宽、峰值波长约507 nm的绿光峰；两峰的发光强度随激发光功率密度的变化而变化，且均存在饱和效应，但各自的变化规律及饱和值的大小不同；紫光峰的中心波长随激发光功率密度的增加而发生了明显的红移.对两峰产生的机理、强度饱和值存在的原由、强度随激发光功率密度变化及紫光峰红移的起因进行了分析.     

用超磁致伸缩调谐光纤光栅的光分/插复用器

提出并研究了一种新型多信道切换的全光分/插复用器,它主要由光纤Bragg光栅(FBG)和一对光环行器组成.采用了一种高效的超磁致伸缩材料(GMM)使FBG产生有效的Bragg波长偏移.用控制电流来调控FBG的应变和Bragg波长偏移.用4只相同的FBG与波长叠加技术相结合,可建立能提供15种不同下路信道方式的OADM.     

Synthesis and light emitting properties of polyacetylenes having pendent fluorene groups

Five novel fluorene‐containing polymers, poly[(9,9‐dimethylfluoren‐2‐yl)acetylene] ( PFA1 ), poly[(1‐pentyl‐2‐(9,9‐dimethylfluoren‐2‐yl)acetylene) ( PFA2 ), poly[1‐decyl‐2‐(9,9‐dimethylfluoren‐2‐yl)acetylene] ( PFA3 ), poly[1‐phenyl‐2‐(9,9‐dimethylfluoren‐2‐yl)acetylene] ( PFA4 ), and poly[1‐(3,4‐difluorophenyl)‐2‐(9,9‐dimethylfluoren‐2‐yl)acetylene] ( PFA5 ) were synthesized by the polymerization of the corresponding fluorene‐substituted acetylenic monomers ( M1–M5), using WCl₆, MoCl_5, and TaCl₅ as catalysts and n‐Bu₄Sn as a cocatalyst. The synthesized polymers were thermally stable and readily soluble in common organic solvents. The degradation temperatures for a 5% weight loss of the polymers were ∼352–503 °C under nitrogen. PFA1–PFA5 show emission peaks from 402 to 590 nm. Besides, their electroluminescent properties were studied in heterostructure light‐emitting diodes (LEDs), using PFA2–PFA5 as an emitting layer. The PFA5 device revealed an orange‐red emission peak at 602 nm with a maximum luminescence of 923 cd/m² at 8 V. A device with the ITO/PEDOT/ a mixture of PFA2 (98 wt %) and PFA5 (2 wt %)/Ca/Al showed near white emission. Its maximum luminance and current efficiency are 450 cd/m² at 15 V and 1.3 cd/A, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 519–531, 2006     

Atom transfer radical polymerization directly from poly(vinylidene fluoride): Surface and antifouling properties

The direct preparation of grafting polymer brushes from commercial poly (vinylidene fluoride) (PVDF) films with surface‐initiated atom transfer radical polymerization (ATRP) is demonstrated. The direct initiation of the secondary fluorinated site of PVDF facilitated grafting of the hydrophilic monomers from the PVDF surface. Homopolymer brushes of 2‐(N,N‐dimethylamino)ethyl methacrylate (DMAEMA) and poly (ethylene glycol) monomethacrylate (PEGMA) were prepared by ATRP from the PVDF surface. The chemical composition and surface topography of the graft‐functionalized PVDF surfaces were characterized by X‐ray photoelectron spectroscopy, attenuated total reflectance/Fourier transform infrared spectroscopy, and atomic force microscopy. A kinetic study revealed a linear increase in the graft concentration of poly[2‐(N,N‐dimethylamino)ethyl methacrylate] (PDMAEMA) and poly[poly(ethylene glycol) monomethacrylate] (PPEGMA) with the reaction time, indicating that the chain growth from the surface was consistent with a controlled or living process. The living chain ends were used as macroinitiators for the synthesis of diblock copolymer brushes. The water contact angles on PVDF films were reduced by the surface grafting of DMAEMA and PEGMA. Protein adsorption experiments revealed a substantial antifouling property of PPEGMA‐grafted PVDF films and PDMAEMA‐grafted PVDF films in comparison with the pristine PVDF surface. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3434–3443, 2006     

热丝CVD生长金刚石薄膜喇曼散射研究

本文报道热丝化学气相沉积法（ＨＦＣＶＤ）生长金钢石薄膜的喇曼散射结果。选取多种峰型，对金钢石薄膜喇曼谱（１１０－１８００ｃｍ－１）采用最小二乘法进行非线性拟合，得到最佳拟合模型，其计算得到的拟合曲线怀实验谱图符合得较好。该模型揭示，石墨Ｄ峰（１３５５ｃｍ－１）是金刚石薄膜喇曼谱中不可缺少的一个组份，并且结合石墨Ｄ峰和金刚石喇曼的空间相关线型，可以解释金刚石喇曼区特殊峰形的物理机制，拟合参量的进一步     

4,4’-二苯甲酰基联苯构象的分子力学研究

4,4’—二苯甲酰基联苯有两个三岔点,属于二元三岔共轭体系。从结构式上看,卽可把它作为二苯甲酮骨架的取代产物,又可看作是在联苯骨架上的取代。作为系统研究三岔共轭体系结构效应的部分工作,我们用QCFF/PI+MCA(Quantum Mechanical Extension of the Consistent Force Field to PI Electron System+Molecular Crystal Analysis)程序研究了其晶态和孤立态(气态)构象。研究结果表明,在孤立态中,联苯基的二个苯环的最小二乘     

双甲基丙烯酰氧苯基丙烷与苯乙烯共聚物的光学性能

标题共聚物的耐冲击性与丙烯酸酯均聚物相比有明显改善,但随着双烯单体含量的降低,共聚物的耐热性和表面硬度有所下降。丙烯酸酯含量为70%的共聚物的吸收紫外光能力最强(<370nm全吸收),含量为5%～10%的共聚物耐吸水性、耐酸耐碱性及耐冲击性最好。     

TNFa在血管内皮细胞ECV304中的靶向表达研究

在缺失了3'LTR U3区内病毒的启动子／增强子序列的逆转录病毒载体pLXSNd中,用血管内皮生长因子受体KDR的特异性启动子调控了TNFa在血管内细胞ECV304中的靶向表达。将构建的载体pLXSN-TNFa,pLXSNd-KDRp-TNFa和空载体pLXSN用PA317细胞包装后获得重组病毒,并用重组病毒分别感染NIH3T3细胞和ECV304细胞,培养物上清的ELISA结果证明,KDR启动子指导的TNFa在KDR阳性细胞ECV304中的表达量为在KDR阴性细胞NIH3T3中的表达量的8倍;而TR指导的TNFa在这两种细胞中的表达无明显差异,实现了TNFa在血管内皮细胞中的靶向表达,这可能为肿瘤基因治疗提供新途径。