Electroosmotic flow controllable coating on a capillary surface by a sol-gel process for capillary electrophoresis

A simple coating procedure employing a sol-gel process to modify the inner surface of a bare fused-silica capillary with a positively charged quaternary ammonium group is established. Scanning electron microscopic studies reveal that a smooth coating with 1 to approximately 2 microm thickness can be obtained at optimized coating conditions. With 40 mM citrate as a running electrolyte, the plot of electroosmotic flow (EOF) versus pH shows a unique three-stage EOF pattern from negative to zero and then to positive over a pH range of 2.5 to 7.0. At pH above 5.5, the direction of the EOF is from the anode to the cathode, as is the case in a bare fused-silica capillary, and the electroosmotic mobility increases as the pH increases. However, the direction of the EOF is reversed at pH below 4.0. Over the pH range of 4.0 to 5.5, zero electroosmotic mobility is obtained. Such a three-stage EOF pattern has been used to separate six aromatic acids under suppressed EOF and to separate nitrate and nitrite with the anions migrating in the same direction as the EOF. The positively charged quaternary ammonium group on the coating was also utilized to minimize the adsorption problem during the separation of five basic drugs under suppressed EOF and during the separation of four basic proteins with the cations migrate in the opposite direction as the EOF. Also, the stability and reproducibility of this column are good.     

Hyperpolarized 129Xe NMR investigation of multifunctional organic/inorganic hybrid mesoporous silica materials

An extensive study has been made on a series of multifunctional mesoporous silica materials, prepared by introducing two different organoalkoxysilanes, namely 3-[2-(2-aminoethylamino)ethylamino]propyltrimethoxysilane (AEPTMS) and 3-cyanopropyltriethoxysilane (CPTES) during the base-catalyzed condensation of tetraethoxysilane (TEOS), using the variable-temperature (VT) hyperpolarized (HP) 129Xe NMR technique. VT HP-129Xe NMR chemical shift measurements of adsorbed xenon revealed that surface properties as well as functionality of these AEP/CP-functionalized microparticles (MP) could be controlled by varying the AEPTMS/CPTES ratio in the starting solution during synthesis. Additional chemical shift contribution due to Xe-moiety interactions was observed for monofunctional AEP-MP and CP-MP as well as for bifunctional AEP/CP-MP samples. In particular, unlike CP-MP that has a shorter organic backbone on the silica surface, the amino groups in the AEP chain tends to interact with the silanol groups on the silica surface causing backbone bending and hence formation of secondary pores in AEP-MP, as indicated by additional shoulder peak at lower field in the room-temperature 129Xe NMR spectrum. The exchange processes of xenon in different adsorption regions were also verified by 2D EXSY HP-129Xe NMR spectroscopy. It is also found that subsequent removal of functional moieties by calcination treatment tends to result in a more severe surface roughness on the pore walls in bifunctional samples compared to monofunctional ones. The effect of hydrophobicity/hydrophilicity of the organoalkoxysilanes on the formation, pore structure and surface property of these functionalized mesoporous silica materials are also discussed.     

Molecular dynamics on a distributed-memory multiprocessor

Dynamics simulations of molecular systems are notoriously computationally intensive. Using parallel computers for these simulations is important for reducing their turnaround time. In this article we describe a parallelization of the simulation program CHARMM for the Intel iPSC/860, a distributed memory multiprocessor. In the parallelization, the computational work is partitioned among the processors for core calculations including the calculation of forces, the integration of equations of motion, the correction of atomic coordinates by constraint, and the generation and update of data structures used to compute nonbonded interactions. Processors coordinate their activity using synchronous communication to exchange data values. Key data structures used are partitioned among the processors in nearly equal pieces, reducing the memory requirement per node and making it possible to simulate larger molecular systems. We examine the effectiveness of the parallelization in the context of a case study of a realistic molecular system. While effective speedup was achieved for many of the dynamics calculations, other calculations fared less well due to growing communication costs for exchanging data among processors. The strategies we used are applicable to parallelization of similar molecular mechanics and dynamics programs for distributed memory multiprocessors. © 1992 by John Wiley & Sons, Inc.     

Fluorescence immunoassay of alpha-fetoprotein with iron(III) tetrasulfonatophthalocyanine as a mimetic enzyme labeling reagent

A new fluorimetric immunoassay for alpha-fetoprotein (AFP) has been developed using a novel promising mimetic peroxidase, iron(III) tetrasulfonatophthalocyanine (FeTSPc), as a labeling reagent to catalyze the fluorescence reaction of P- hydroxyphenylacetic acid (P-HPA) and hydrogen peroxide (H2O2). In the competitive immunoassay, anti-AFP antibody was coated on a 96-well plate (polystyrene) and a constant amount of FeTSPc-labeled AFP and a known amount of test solution were added. Non-labeled and FeTSPc-labeled AFP compete for binding to the plate-bound antibody. After the immunoreaction, the immunochemically adsorbed FeTSPc-AFP conjugate moiety was determined by measuring the fluorescence produced in a solution containing P-HPA and H2O2. AFP can be determined in the concentration range of 1-300 ng mL(-1) with a detection limit of 0.5 ng mL(-1).     

Systems-based design of bi-ligand inhibitors of oxidoreductases: filling the chemical proteomic toolbox

Genomics-driven growth in the number of enzymes of unknown function has created a need for better strategies to characterize them. Since enzyme inhibitors have traditionally served this purpose, we present here an efficient systems-based inhibitor design strategy, enabled by bioinformatic and NMR structural developments. First, we parse the oxidoreductase gene family into structural subfamilies termed pharmacofamilies, which share pharmacophore features in their cofactor binding sites. Then we identify a ligand for this site and use NMR-based binding site mapping (NMR SOLVE) to determine where to extend a combinatorial library, such that diversity elements are directed into the adjacent substrate site. The cofactor mimic is reused in the library in a manner that parallels the reuse of cofactor domains in the oxidoreductase gene family. A library designed in this manner yielded specific inhibitors for multiple oxidoreductases.     

Characterization of cyclodextrin-modified infrared chemical sensors: Part I. Modeling the mechanisms of interaction

To explore the properties of cyclodextrins (CDs) as an optical sensing phase, the behavior of immobilized CD in interaction with analytes was studied in this work. CDs having different cavity sizes were immobilized onto the surface of infrared (IR) internal reflection-sensing element (IRE) to kinetically monitor the behavior of CD in interaction with analytes. Several aromatic compounds having various molecular sizes and functional groups were used to characterize the interaction mechanism. A two-layer modification method was proposed in this work, which utilized a thin hydrophobic film (polyvinyl benzyl chloride) to stick on the IRE and to covalently bond to the CDs through an ethylene diamine linker. The synthesized CD phases exhibited high stability in aqueous solution. To analyze the behavior during the formation of complexes between the guest molecules and the CD phases, we modeled the interaction behavior and treated the kinetic data with the theoretical equations developed in this work. The results indicate that the behavior of the interaction between guest molecules and CDs was explained by considering the formation of two types of complexes: adsorbed complexes and inclusion complexes. The formation of the inclusion complexes was relatively fast, the time required to reach equilibrium could be shorter than a few minutes. The adsorbed complexes were also observed, but their rate of formation was relatively slow; equilibrium could be reached at times greater than 60 min. Based on the signals observed under equilibrium conditions, the concentration of inclusion complexes was approximately three times than that of the adsorbed complexes.     

非水溶剂中铁酞菁的“in—situ”可见紫外光谱电化学

用循环伏安与现场可见紫外光谱电化学方法研究了氯化４－特丁基苯氧基铁酞菁［（ＴｂＰｃ）Ｆｅ（Ⅲ）Ｃｌ］电化学行为．结果表明，在四氢呋喃溶剂中其正电位区经历了两步氧化过程，对应于Ｆｅ（Ⅲ）／Ｆｅ（Ⅳ）以及Ｆｅ（Ⅳ）／阳离子自由基的生成反应，负电位区还原过程经历了Ｆｅ（Ⅲ）／Ｆｅ（Ⅱ），Ｆｅ（Ⅱ）／Ｆｅ（Ⅰ）和Ｆｅ（Ⅰ）／阴离子自由基生成的３个步骤，阐述了配位效应对氧化还原机理的影响．指出Ｆｅ（Ⅳ）不寻常价态的出现，是阴离子Ｃｌ－的轴向配位对超常价态起到稳定作用的结果．     

8－羟基喹啉纤维微柱分离富集ICP－AES测定多种痕量元素

制备了８－羟基喹啉纤维滤纸片，作为微柱填充物，同时富集了九种痕量元素，并分离了样品中的高盐组分。富集后的痕量组分采用电感耦合等离子体原子发射光谱法（ＩＣＰ－ＡＥＳ）测定，回收率为９０％～１０２％。     

Two new C18-norditerpenoid alkaloids from Aconitum delavayi

Further phytochemical investigation of the unique C18-norditerpenoid alkaloids from the roots of Aconitum delavayi Franch ledto the isolation of two new norditerpenoid alkaloids,delavaconitine F 1 and delavaconitine G 2.Their structures were determinedfrom spectroscopic evidence.     

Zeolite NaY-mediated oxidation of dyes with H2O2: unique heterogeneous non-transition metal center cleavage of H2O2 under visible light irradiation

This study investigated the visible-light catalysis mediated by zeolite NaY on the oxidation of dyes with H₂O₂. The results demonstrated that zeolite NaY acts as a sink for the electron from the photo-excited dye in the heterogeneous catalysis. Furthermore, the electron can effectively activate H₂O₂ to produce ^·OH radical that is a powerful oxidant for the oxidation of dye at room temperature. The effects of the framework topology, Si/Al ratio, and exchangeable cation of the zeolite on the oxidation of various dyes were also shown.