Zeolite NaY-mediated oxidation of dyes with H_2O_2: unique heterogeneous non-transition metal center cleavage of H_2O_2 under visible light irradiation

This study investigated the visible-light catalysis mediated by zeolite NaY on the oxidation of dyes with H2O2. The results demonstrated that zeolite NaY acts as a sink for the electron from the photo-excited dye in the heterogeneous catalysis. Furthermore, the electron can effectively activate H2O2 to produce ?OH radical that is a powerful oxidant for the oxidation of dye at room temperature. The effects of the framework topology, Si/Al ratio, and exchangeable cation of the zeolite on the oxidation of various dyes were also shown.     

Zeolite NaY-mediated oxidation of dyes with H2O2: unique heterogeneous non-transition metal center cleavage of H2O2 under visible light irradiation

This study investigated the visible-light catalysis mediated by zeolite NaY on the oxidation of dyes with H2O2. The results demonstrated that zeolite NaY acts as a sink for the electron from the photo-excited dye in the heterogeneous catalysis. Furthermore, the electron can effectively activate H2O2 to produce ·OH radical that is a powerful oxidant for the oxidation of dye at room temperature. The effects of the framework topology, Si/Al ratio, and exchangeable cation of the zeolite on the oxidation of various dyes were also shown.     

可见光照射下取代型杂多酸盐对染料的催化降解

将杂多酸(GaWmFen)负载到阴离子交换树脂(Resin)上,得到GaWmFen/Resin(GaWmFenR)固相光催化剂,在可见光的照射下,以罗丹明B(RhB)为模型化合物,含镓的GaWmFen/Resin(GaWmFenR)催化剂可以有效地活化H2O2降解染料RhB,随着铁原子的取代数目的增多,RhB浓度比降低的趋势加快,GaW9Fe3最快,C/C0降低0.937.在光照300 min 以后,体系的总有机碳(TOC)的变化趋于平缓,减少了0.15 mg.L-1.催化剂的8次重复试验结果表明GaWmFenR固相光催化剂易于分离,并且具有良好的稳定性,可以重复利用.     

Water reduction and oxidation on Pt-Ru/Y2Ta2O5N2 catalyst under visible light irradiation

Y(2)Ta(2)O(5)N(2) is presented as a novel photocatalyst with high activity for water splitting under visible-light irradiation in the presence of appropriate sacrificial reagents; the activity for reduction to H(2) is increased by the incorporation of Pt or Ru as a co-catalyst, with a significant increase in production efficiency when both Pt and Ru are present.     

Photocatalytic selective oxidation of CO with O2 in the presence of H2 over highly dispersed chromium oxide on silica under visible or solar light irradiation

A highly dispersed Cr⁶⁺-oxide species on silica (Cr/SiO₂) was found to act as an efficient photocatalyst for the selective oxidation of CO into CO₂ with O₂ in the presence of H₂ under visible (λ>420 nm) or solar light irradiation at 293 K. UV-Vis, photoluminescence and FT-IR investigations revealed that the selective reactivity of the photoexcited tetrahedral Cr⁶⁺-oxide species ([Cr⁵⁺−O⁻]^*) with CO, as well as the high reactivity of the photoreduced Cr⁶⁺-oxide species (Cr⁴⁺-oxide species) with O₂ both play significant roles in this reaction.     

Design of unique titanium oxide photocatalysts by an advanced metal ion-implantation method and photocatalytic reactions under visible light irradiation

The metal ion-implantation of titanium oxide with various transition metal ions was carried out by applying by high voltage acceleration. The subsequent calcination of the implanted TiO₂ in oxygen at around 723 K resulted in a large shift in the absorption spectra of the TiO₂ toward visible light regions, its extent being dependent on the amount and the kind of metal ions implanted. Such metal ion-implanted titanium oxide catalysts were active in carrying out various photocatalytic reactions such as the decomposition of NO into N₂, O₂ and N₂O at 275 K under irradiation with visible light longer than 450 nm. The application of this advanced, high energy metal ion-implantation method enables the novel design of titanium oxide photocatalysts which can absorb and initiate vital reactions under visible light and will contribute to the development of catalytic systems utilizing solar energy.     

Unusual enhancement of H2 evolution by Ru on TaON photocatalyst under visible light irradiation

H2 evolution on TaON photocatalyst under visible light irradiation (420 nm < or = lambda < or = 500 nm) in an aqueous methanol solution is found to be remarkably enhanced by adding Ru as a noble-metal co-catalyst.     

Metal-free activation of H2O2 by g-C3N4 under visible light irradiation for the degradation of organic pollutants

Semiconducting carbon nitride materials were successfully prepared via a thermal poly-condensation of dicyandiamide as a precursor at >500 °C. The resulting materials were investigated as metal-free catalysts for the activation of H(2)O(2) with visible light under mild conditions, using the decomposition of Rhodamine B (RhB) in aqueous solution as a model reaction. Results revealed that carbon nitride catalysts can activate H(2)O(2) to generate reactive oxy-radicals under visible light irradiation without employment of any metal additives, leading to the mineralization of the dye. Factors affecting the degradation of organic compounds are pH values and the concentration of H(2)O(2). Recycling of the catalyst indicated no obvious deactivation during the entire catalytic reaction, indicating good (photo)chemical stability of metal-free polymeric carbon nitride photocatalysts for environmental purification. This study demonstrated a promising approach for the activation of green oxidant, hydrogen peroxide, by the newly-developed polymer photocatalysts for environmental remediation and oxidation catalysis.     

Efficient conversion of CO2 and H2O into hydrocarbon fuel over ZnAl2O(4)-modified mesoporous ZnGaNO under visible light irradiation

Considering light absorption by narrowing the band gap and gas capture by the mesostructure and basicity of material, an efficient artificial photosynthesis system was constructed based on a mesoporous ZnAl(2)O(4)-modified ZnGaNO photocatalyst.     

Photocatalytic oxidation of 4-chlorophenol using thermosensitive zinc phthalocyanine copolymer under visible light irradiation

A novel thermosensitive photocatalyst,P(NIPA-co-ZnMPc),has been prepared using zinc tetra(N-carbonylacrylic)aminophthalocya-nine(ZnMPc) to copolymerize with N-isopropylacrylamide(NIPA).The lower critical solution temperature(LCST) of P(NIPA-co-ZnMPc) measured by differential scanning calorimetry(DSC) was 33.5 °C.P(NIPA-co-ZnMPc) effectively catalyzes the oxidation of 4-chlorophenols(4-CP) using oxygen as oxidant under the visible light irradiation,and it has higher photocatalytic activity than ZnMPc under t...     

Crystal facet dependence of water oxidation on BiVO4 sheets under visible light irradiation

Monoclinic BiVO(4) crystals with preferentially exposed (040) facets were hydrothermally synthesized by using a trace amount of TiCl(3) as the directing agent; this function was confirmed by X-ray diffraction patterns (XRD) and high-resolution transmission electron microscopy (HRTEM). The effects of the directing agent TiCl(3) and the pH values applied during synthesis have been studied, and the optimized BiVO(4) sample with highly exposed (040) facet could be obtained by using 1.2 at.% of TiCl(3) as the directing agent at a pH value of 2. Some complementary techniques were also applied to exclude the effects of the structural and physical property changes, such as surface area and hydrophilicity. The photocatalytic activity of oxygen evolution on BiVO(4) is found to be proportionally correlated with the exposed surfaces of the (040) facet. It is assumed that the active sites with a BiV(4) structure on the exposed (040) facet is assigned to be responsible for the high activity of O(2) evolution.     

可见光照射下温敏锌酞菁共聚物光催化氧化对氯苯酚

将含有不饱和双键的四马来酰胺基锌酞菁（ZnMPc）与N-异丙基丙烯酰胺（NIPA）共聚,制备得到一种新型温敏锌酞菁共聚物光催化剂：P（NIPA—co—ZnMPc）,采用差示扫描量热法测得其低临界溶解温度（LCST）为33．5℃．在可见光照射下利用氧气作为氧化剂,P（NIPA—co-ZnMPc）~g有效地催化氧化对氯苯酚（4-CP）,与小分子ZnMPc相比,P（NIPA-co-ZnMPc）具有更高的光催化活性．两者在水溶液中的紫外．可见光谱图显示,共聚后大分子链的阻隔作用能有效地抑制酞菁分子的二聚,从而大大提高了其催化活性．温度对其光催化活性的实验结果显示,P（NIPA-co-ZnMPc）在其LCST附近具有最高的催化效率,说明催化剂的聚集态结构对其光催化活性产生直接影响,通过测定其在不同温度下的流体力学半径,可推测在其LCST附近发生了分子间的疏水聚集,会对4-CP起富集作用,从而加快了光催化反应速率．该光催化剂可通过均相催化异相分离实现循环利用,实验表明该催化剂具有较高的稳定性．     

Enhancement of photocatalytic H2 evolution on CdS by loading MoS2 as Cocatalyst under visible light irradiation

This communication presents our recent results that the activity of photocatalytic H2 production can be significantly enhanced when a small amount of MoS2 is loaded on CdS as cocatalyst. The MoS2/CdS catalysts show high rate of H2 evolution from photocatalytic re-forming of lactic acid under visible light irradiation. The rate of H2 evolution on CdS is increased by up to 36 times when loaded with only 0.2 wt % of MoS2, and the activity of MoS2/CdS is even higher than those of the CdS photocatalysts loaded with different noble metals, such as Pt, Ru, Rh, Pd, and Au. The junction formed between MoS2 and CdS and the excellent H2 activation property of MoS2 are supposed to be responsible for the enhanced photocatalytic activity of MoS2/CdS.     

Photocatalytic water oxidation with nonsensitized IrO2 nanocrystals under visible and UV light

Rutile IrO(2) is known as being among the best electrocatalysts for water oxidation. Here we report on the unexpected photocatalytic water oxidation activity of 1.98 nm ± 0.11 nm succinic acid-stabilized IrO(2) nanocrystals. From aqueous persulfate and silver nitrate solution the nonsensitized particles evolve oxygen with initial rates up to 0.96 μmol min(-1), and with a quantum efficiency of at least 0.19% (measured at 530 nm). The catalytic process is driven by visible excitations from the Ir-d(t(2g)) to the Ir-d(e(g)) band (1.5-2.75 eV) and by ultraviolet excitations from the O-p band to the Ir-d(e(g)) (>3.0 eV) band. The formation of the photogenerated charge carriers can be directly observed with surface photovoltage spectroscopy. The results shed new light on the role of IrO(2) in dye- and semiconductor-sensitized water splitting systems.     

Photocatalytic degradation of pathogenic bacteria with AgI/TiO2 under visible light irradiation

The photocatalytic disinfection of pathogenic bacteria in water was investigated systematically with AgI/TiO2 under visible light (lambda > 420 nm) irradiation. The catalyst was found to be highly effective in killing Escherichia coli and Staphylococcus aureus. The adsorbed *OH and hVB+ on the surface of the catalyst were proposed to be the main active oxygen species by study of electron spin resonance and the effect of radical scavengers. The process of destruction of the cell wall and the cell membrane was verified by TEM, potassium ion leakage, lipid peroxidation, and FT-IR measurements. Some products from photocatalytic degradation of bacteria such as aldehydes, ketones, and carboxylic acids were identified by FT-IR spectroscopy. These results suggested that the photocatalytic degradation of the cell structure caused the cell death. The electrostatic force interaction of the bacteria-catalyst significantly affected the efficiency of disinfection on the basis of the E. coli inactivation under different conditions.     

Fe2O3/ZnO/ZnFe2O4 composites for the efficient photocatalytic degradation of organic dyes under visible light

In this study, novel ternary Fe₂O₃/ZnO/ZnFe₂O₄ (ZFO) composites were successfully prepared through a simple hydrothermal reaction with subsequent thermal treatment. The as-prepared products were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET) analysis, Barrett-Joyner-Halenda (BJH) measurement, and UV–vis diffuse reflectance spectroscopy (UV–vis DRS). The photocatalytic degradation of rhodamine B (Rh B) under visible light irradiation indicated that the ZFO composites calcined at 500 °C has the best photocatalytic activity (the photocatalytic degradation efficiency can reach up to 95.7% within 60 min) and can maintain a stable photocatalytic degradation efficiency for at least three cycles. In addition, the photocatalytic activity of ZFO composites toward dye decomposition follows the order cationic Rh B > anionic methyl orange. Finally, using different scavengers, superoxide and hydroxyl radicals were identified as the primary active species during the degradation reaction of Rh B.     

CuAl2O4 powder synthesis by sol-gel method and its photodegradation property under visible light irradiation

Nanocrystalline spinel CuAl₂O₄ powders were prepared by sol-gel method from nitrate Cu(NO₃)₂·3H₂O, Al(NO₃)₃·9H₂O and complex C₆H₈O₇·H₂O. Sintering was carried out at 400, 500, 600, 700, 800°C respectively for 2 h in air. The XRD patterns started to appear CuAl₂O₄ peaks after sintering of 500°C and consist of only CuAl₂O₄ peaks as spinel crystal after sintering of 700°C. The powders were analyzed by TEM and UV-vis diffuse reflectance spectrum to be round, about 10–30 nm in size and Eg=1.77 eV. Photodegradation property of nanocrystalline CuAl₂O₄ powders was investigated by using methyl orange as model pollutant and mercury lamp (λ>400 nm) as energy source. The results indicated that CuAl₂O₄ powders sintered at 700°C had the excellent visible photocatalytic property. Under the irradiation of visible light, methyl orange could be degraded 97% in 120 min.     

增强可见光催化活性的Z型MoO3/Bi2O4复合光催化剂的制备（英文）

全球工业化进程的加快使人们饱受环境污染问题的困扰.半导体光催化技术作为一种高效、绿色、有潜力的新技术,在环境净化方面有着广阔的应用前景.Bi2O4是近年来新开发出的一种铋基光催化剂,在环境净化方面已有一些研究.但是,单体光催化剂通常存在光响应范围窄、光生载流子复合率高等问题,这些不足限制了Bi2O4的进一步应用.因此,需要通过适当的改性来拓宽其光响应范围和提高其载流子的分离效率,从而提高其光催化活性.构建Z型异质结被认为是提高光催化剂光生载流子分离效率并进一步提高光催化活性的有效方法.MoO3是一种宽禁带的n型半导体,具有独特的能带结构、光学特性和表面效应,是一种非常有前景的半导体光催化剂.虽然MoO3材料的光生载流子复合率高,带隙(2.7-3.2 eV)大,不利于其参与光催化反应,但MoO3与其他合适的半导体配位形成复合材料后能够有效提高其光生载流子的分离效率,从而提高其光催化活性.本研究采用简单的水热法制备了一种新型Z型MoO3/Bi2O4复合光催化剂,SEM和TEM分析结果表明,MoO3和Bi2O4紧密结合在一起.X射线光电子能谱分析表明,MoO3和Bi2O4之间存在很强的界面相互作用,这有助于电荷转移和光生载流子的分离.光致发光光谱、电阻抗和光电流测试也证明了MoO3/Bi2O4复合光催化剂的光生载流子分离效率更高,形成了更强的光电流.通过在可见光下降解RhB溶液评价了所合成光催化剂的光催化性能.15%MoO3/Bi2O4(15-MB)复合光催化剂表现出了最佳的可见光催化活性,在40 min内对10 mg/L RhB溶液的降解率达到了99.6%,其降解速率是Bi2O4的2倍.此外,15-MB复合光催化剂在经过五次循环降解RhB溶液后仍保持良好的光催化活性和稳定性,表明MoO3/Bi2O4复合光催化剂具有较强的应用潜力.通过自由基捕获实验确定了光催化反应中主要的活性自由基为 O2-和h+.通过莫特-肖特基测试和带隙计算得到MoO3和Bi2O4的价带和导带位置.最后,根据实验和分析结果提出了Z型MoO3/Bi2O4复合光催化剂在可见光下降解RhB溶液的机理.本研究为设计铋基Z型异质结光催化剂用于高效去除环境污染物提供了一种有前景的策略.