信息技术与物理课程整合的几个层面

《基础教育课程改革纲要》要求 :要“大力推进信息技术在教学过程中的普遍应用 ,促进信息技术与学科课程的整合 ,逐步实现教学内容的呈现方式、学生的学习方式、教师的教学方式和师生互动方式的变革 ,充分发挥信息的优势 ,为学生的学习和发展提供丰富多彩的教育环境和有力的学习工具 .”可见 :信息技术与其它课程的整合是课程教学中把信息技术、信息资源、信息方法和课程内容有机结合 ,是一种新型的教学方式 .下面讨论几个具体层面上的问题 :1　信息技术与物理教学目标和内容的整合面对新世纪 ,信息处理的技能、学习能力、问题解决能力、与…     

Robust Output Tracking Control of an Uncertain Linear System via a Modified Optimal Linear-Quadratic Method

This study investigates the robust output tracking problem for a class of uncertain linear systems. The uncertainties are assumed to be time invariant and to satisfy the matching conditions. According to the selected nominal parameters, an optimal solution with a prescribed degree of stability is determined. Then, an auxiliary input via the use of an adapting factor, connected to the nominal optimal control, is introduced to guarantee the robustness and prescribed degree of stability for the output tracking control of the uncertain linear systems. This method is very simple and effective and can reject bounded uncertainties imposed on the states. A maglev vehicle model example is given to show its effectiveness.     

Pt（IV）修饰的非晶态TiO2对2，4-二氯苯氧基乙酸的可见光降解

用溶胶-凝胶法制备了在可见光照射下具有光催化活性的掺杂P（t Ⅳ）离子的非晶态微孔TiO2，表面积为160～200 m2/g；含3.0%Pt（Ⅳ）的AMM-Ti具有最大的光催化活性. X射线精细结构分析（EXAFS）表明，单个的PtCl4分子均匀地分布在非晶态二氧化钛表面；用这种光催化剂降解2，4-二氯苯氧基乙酸时，2，4-二氯苯酚是主要的中间物，通过Langmuir-Hinshelwood 方程的线性形式估算了反应速率常数k 和吸附平衡常数K，研究了光催化起始反应速率和反应物起始浓度之间的关系，同时，提     

Laser-induced etching of polycrystalline Al2O3TiC in KOH aqueous solution

Laser-induced etching of polycrystalline Al₂O₃TiC material by a tightly-focused cw Ar ion laser has been investigated in a KOH solution with different concentrations. It is found that the KOH concentration can strongly affect the etching quality where low KOH concentration can result in rough and irregular patterns. Laser-induced etching of polycrystalline Al₂O₃TiC in a KOH solution is found to be a photothermal reaction in which a threshold laser power exists. With an appropriate set of etching parameters, well-defined grooves can be obtained with clean side walls and with an etching rate up to several hundred micrometers per second. The etching behavior is also found to depend on laser scanning direction. It is also found that the grains in the polycrystalline Al₂O₃TiC material play an important role in the etching dynamics and etching quality. This etching process is believed to be applicable to the formation of a slider surface of magnetic heads in the future.     

注入控制铜蒸气激光方向性时间过程测量

实验研究了注入控制对铜蒸气激光非稳腔输出光束质量的影响，从输出光发散角时间分辨过程的测量结果说明注入加速被注入腔内激光发散角的减小过程。由于被注入腔内放大自发辐射的存在，为得到较好的注入控制效果，注入光的脉宽和进入被注入腔的延时必须恰当。     

工程项目施工状态诊断模型

文章提出了工程项目施工的投资状态函数、进度状态函数、质量状态函数和环境状态函数，并以状态函数为基础，建立了项目施工状态诊断模型。文章给出各层次中的状态函数，理出了施工状态量化诊断的思路，对各层次中状态诊断函数的描述作了探索。     

Angular momentum effect in prescission particle multiplicities for a light system by diffusion model

The effect of angular momentum on the competition between fission and particle emission during light system fission process was studied via fission diffusion model. The prescission particle multiplicities were found to increase with decreasing angular momentum. The experimental prescission proton and α particle multiplicities can be fitted for 10.6 MeV/nucleon ⁸⁴Kr(²⁷Al,binary fission) reaction with this model. Entrance channel effect found in [1] is proved to be angular momentum effect.     

非晶态硒化镉薄膜瞬态光电特性

本文报道用真空热蒸发法淀积的非晶态硒化镉薄膜作光敏介质制备超快光电导探测器。用对撞脉冲锁模Nd:YAG激光器产生的超短光脉冲序列对探测器的响应时间进行检测,结果表明a-CdSe薄膜对皮秒(10^-12秒)级的超短光脉冲作用具有良好的瞬态响应光电特性,探讨a-CdSe薄膜快速弛豫过程的内在机理。     

源气体对沉积的a-C∶F∶H薄膜结构的影响

采用微波电子回旋共振等离子体化学气相沉积(MWPECRCVD)方法,使用不同的源气体(CHF3CH4,CHF3C2H2,CHF3C6H6)体系制备了aC∶F∶H薄膜.由于CH4,C2H2,C6H6气体在等离子体中的分解反应不同导致了薄膜的沉积速率和结构上的差异.红外吸收谱的结果表明,用C6H6CHF3作为源气体沉积的薄膜中几乎不含H,而用C2H2CHF3所沉积的薄膜中的含氟量最高,其相应的CF振动峰位向高频方向偏移.薄膜的真空退火结果表明,aC∶F∶H薄膜的热稳定性除了取决于薄膜的CC键浓度外,还与CC键 关键词： 氟化非晶碳膜 电子回旋共振化学气相沉积 红外吸收光谱     

Properties of matrix-assisted laser desorption. Measurements with a time-to-digital converter.

Some properties of matrix-assisted laser desorption have been studied using single-ion-counting methods and a time-to-digital converter. The methods allow examination of the process for irradiances near the reported threshold for observation with a transient recorder. All measurements were made using bovine insulin as a test compound. We present direct evidence that an irradiance threshold near 10(6) W cm-2 exists for ion production, and that the process is a collective effect, either involving a large number of molecular ions (approximately 10(4) in a successful event or none at all. Above the threshold, the yield is found to scale with a high power (4th to 6th) of the irradiance. Measurements of initial velocity distributions indicate an axial velocity spread corresponding to approximately 50 eV and a radial velocity spread corresponding to approximately 2.4 eV. Thus the ejection or extraction mechanism appears to be strongly asymmetric.