Fabrication of a novel Li<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>MoO<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> film modified electrode and its application as an electrochemical sensor of iodate

A novel organic gel film modified electrode was simply and conveniently fabricated by casting Li_xMoO_y and polypropylene carbonate (PPC) onto the surface of a gold electrode. The cyclic voltammetry and amperometry studies demonstrated that the Li_xMoO_y film modified electrode has a high stability and a good electrocatalytic activity for the reduction of iodate. In amperometry, a good linear relationship between the steady current and the concentration of iodate was obtained in the range from 3×10^–7 to 1×10^–4 mol L^–1 with a correlation coefficient of 0.9997 and a detection limit of 1×10^–7 mol L^–1.     

甲醛与乙醛,甲醚,硝基甲烷相互作用的从头算研究

用6-31G、全构型优化,研究了甲醛与乙醛、甲醚、硝基甲烷的相互作用。结果表明所有超分子稳定构型都包含2个C—H—O氢键的平面环状结构。H—O距离为0.228～0.264 nm,作用能为—19～—24 kJ/mol,与二聚水的作用能接近。稳定性主要取决于甲基上取代基Y吸电子能力以及环状结构中氢键张力。STO-3G不很适用于研究这类分子的相互作用。     

Preparation of multihollow P(St-MAA) particles by sequence soap-free/soap emulsion polymerization and followed by stepwise alkali/acid posttreatment

The effects of ionic emulsifier, sodium dodecylbenzene sulfate (SDBS), on the formation of the multihollow structures in sub-micron sized polymer particles produced by alkali/acid posttreatment were investigated. The original latex particles with narrow size distribution were synthesized by a new sequence emulsifier-free/emulsifier emulsion copolymerization of styrene (St) and methacrylic acid (MAA). Results indicated that the pore size decreased and the pore number increased with the increase of SDBS amount, and the morphology of the posttreated latex particles was also significantly influenced by the introducing time of SDBS in the preparation of the original latex particles, and a suitable introducing time was 3 h of polymerization.     

Enhanced and selective adsorption of mercury ions on chitosan beads grafted with polyacrylamide via surface-initiated atom transfer radical polymerization

Enhanced and selective removal of mercury ions was achieved with chitosan beads grafted with polyacrylamide (chitosan-g-polyacrylamide) via surface-initiated atom transfer radical polymerization (ATRP). The chitosan-g-polyacrylamide beads were found to have significantly greater adsorption capacities and faster adsorption kinetics for mercury ions than the chitosan beads. At pH 4 and with initial mercury concentrations of 10-200 mg/L, the chitosan-g-polyacrylamide beads can achieve a maximum adsorption capacity of up to 322.6 mg/g (in comparison with 181.8 mg/g for the chitosan beads) and displayed a short adsorption equilibrium time of less than 60 min (compared to more than 15 h for the chitosan beads). Coadsorption experiments with both mercury and lead ions showed that the chitosan-g-polyacrylamide beads had excellent selectivity in the adsorption of mercury ions over lead ions at pH < 6, in contrast to the chitosan beads, which did not show clear selectivity for either of the two metal species. Mechanism study suggested that the enhanced mercury adsorption was due to the many amide groups grafted onto the surfaces of the beads, and the selectivity in mercury adsorption can be attributed to the ability of mercury ions to form covalent bonds with the amide. It was found that adsorbed mercury ions on the chitosan-g-polyacrylamide beads can be effectively desorbed in a perchloric acid solution, and the regenerated beads can be reused almost without any loss of adsorption capacity.     

带有可调通道的嵌段共聚物胶束对药物的控制释放

用聚丙烯酸叔丁酯-b-聚乙二醇(PtBA45-b-PEG114)和聚丙烯酸叔丁酯-b-聚4-乙烯基吡啶(PtBA60-b-P4VP80)制备了复合胶束. 该胶束在pH=2.5的酸性水溶液中形成以PtBA为核, PEG和P4VP为壳的稳定球型结构. 在pH=12时, 壳层的P4VP链段变为疏水, 塌缩在PtBA的核上形成内壳, PEG链段继续保持溶解状态, 与成核的PtBA连接并穿过塌陷的P4VP内壳, 形成胶束的冠, 由于PEG处于溶解状态, 其分子链间有比较大的空隙, 可以控制一些小分子通过, 在胶束的表面形成通道. 该通道类似于生物膜的蛋白通道, 可以控制PtBA核与外界进行能量或物质交换的速度. 以布洛芬为模型分子, 负载在胶束内进行药物控制释放研究的结果表明, 胶束表面的通道可以起到明显控制布洛芬释放速度的作用, 并且药物的释放速度与通道在胶束表面的比例成正比.     

Itosides A – I,New Phenolic Glycosides from Itoa orientalis

Eight new benzoylated gentisyl alcohol (=2‐(hydroxymethyl)benzene‐1,4‐diol) glucosides, itosides A–H ( 1 – 8 ), together with the new pyrocatechol (=benzene‐1,2‐diol) glycoside itoside I ( 9 ) were isolated from the bark and twigs of Itoa orientalis (Flacourtiaceae). In itosides B–D ( 2 – 4 ), the gentisyl alcohol moiety was esterified by 1‐hydroxy‐6‐oxocyclohex‐2‐ene‐1‐carboxylic acid, while itosides E–H ( 5 – 8 ) contained instead an additional 2‐hydroxybenzoic acid moiety. The compounds were accompanied by the known derivatives 4‐hydroxytremulacin ( 10 ), poliothyrsoside ( 11 ), poliothyrsin ( 12 ), homaloside D ( 13 ), tremulacin, and pyrocatechol β‐D ‐glucopyranoside. The structures of the new compounds were elucidated by spectral and chemical methods.     

RE(CCl_3COO)_3(Phen)_2·nH_2O混配配合物的合成、性质及晶体结构

利用水和乙醇混合溶剂合成了稀土三氯醋酸盐与2份1,10-邻菲绕啉(phen)配合物RE(CCl_3COO)_3(phen)_2·nH_2O(RE=Nd,Sm,n=0;RE=Eu,n=2)的单晶.结构测定表明,Nd(CCl_3COO)_3(phen)_2为三斜晶系,每个三氯醋酸盐均以双齿配位,2个phen亦为双齿配位,故配位单元中钕为10配位;Eu(CCl_3COO)_3(phen)_2·2H_2O为单斜晶系,1个三氯醋酸根在外界,2个三氯醋酸根为单齿配位,2个phen为双齿配位,另有2分配位水,故配位单元中Eu为8配位.     

A novel Fe（OH）3/TiO2 nanoparticles and its high photocatalytic activity

A very simple and controllable approach was proposed to synthesize novel Fe(OH)_3/TiO_2 nanoparticles.Compared with neat TiO2,the Fe(OH)_3/TiO_2 increased the rate of the photocatalytic degradation of methyl orange at pH 6.0 by more than five times, showing photocatalytic activity as excellent as P25.This enhancing effect is mainly attributed to the ferric hydroxide deposits as the electron scavenger and the enriched surface hydroxyl groups.     

二茂铁亚胺环钯化合物－－一种新型芳基氯化汞偶联催化剂

发现在催化量二茂铁亚胺环钯化合物催化下，芳基氯化汞可在湿和条件下偶联 ，以中等或高的收率生成联芳烃。对于铑盐不能催化偶联的邻位取代苯基氯化汞和 α－基氯化汞，在此体系中亦可发生偶联。以HMPA为溶剂，在x = 0.025（摩尔分 数）化合物1或2催化下与2.0当量氯化锂存在时，得到最好的催化效果。     

Fe3+/V5+/TiO2复合纳米微粒光催化性能的研究

采用溶胶凝胶法制备了Fe^3 /V^5 /TiO2复合纳米微粒作为光催化剂。光降解反应结果表明，其掺杂催化剂Fe^3 /V^5 /TiO2的光催化活性明显提高。光电化学研究显示，铁离子可以成为电荷陷阱，促进空穴的界面传递反应。适量钒离子掺杂使TiO2电极的光电流升高，导带中电子浓度的增大，加快了界面的电子传递反应。共掺杂催化剂中，Fe^3 、V^5 分别提供了空穴与电子的陷阱，同时加快了电子与空穴的界面传递反应，从 更有效地提高光催化活性。双组份共掺杂为提高TiO2光催化活性提供新的途径。