Modeling and character analyzing of multiple fractional-order memcapacitors in parallel connection

Recently,the memory elements-based circuits have been addressed frequently in the nonlinear circuit theory due to their unique behaviors.Thus,the modeling and characterizing of the mem-elements become essential.In this paper,the analysis of the multiple fractional-order voltage-controlled memcapacitors model in parallel connection is studied.Firstly,two fractional-order memcapacitors are connected in parallel,the equivalent model is derived,and the characteristic of the equivalent memcapacitor is analyzed in positive or negative connection.Then a new understanding manner according to different rate factor K and fractional orderαis derived to explain the equivalent modeling structure conveniently.Additionally,the negative order appears,which is a consequence of the combination of memcapacitors in different directions.Meanwhile,the equivalent parallel memcapacitance has been drawn to determine that multiple fractional-order memcapacitors could be calculated as one composite memcapacitor.Thus,an arbitrary fractional-order equivalent memcapacitor could be constructed by multiple fractional-order memcapacitors.     

Cross section of the impact single ionization of B2＋ by H＋

The ionization process of B2+ by H+ impact is studied using the continuum-distorted-wave eikonal-initial-state (CDW-EIS) method and the modified free electron peak approximation (M-FEPA), respectively. Total, single-, and double- differential cross sections from 1s and 2s orbitals are presented for the energy range from 10 keV/u to 10 MeV/u. Comparison between the results from the two methods demonstrates that the total and single-differential cross sections for the high-energy incident projectile case can be well evaluated using the simple M-FEPA model. Moreover, the M-FEPA model reproduces the essential features of the binary-encounter (BE) bump in the double-differential cross sections. Thus, the BE ionization mechanism is discussed in detail by adopting the M-FEPA model. In particular, the double- and single-differential cross sections from the 2s orbital show a high-energy hip, which is different from those from the 1s orbital. Based on Ref. [1], the Compton profiles of B2+ for 1s and 2s orbitals are given, and the hips in DDCS and SDCS from the 2s orbital are explained.     

带有二元连接函数的半参数模型

提出了一种新的带有二元连接函数的广义半参数模型,即二元连接模型(简称为BLM).使用轮廓似然方法估计模型的参数和非参数部分,并给出了计算算法.证明了所得的未知参数的估计量为n~(1/2)-相合,渐近正态且具有渐近最小方差,给出了实际数据分析和模拟研究,最终采用局部功效方法来检验非参数部分的线性性.     

硒吩聚合物/寡聚物有机光电材料研究进展

主要从光电性能角度总结了近几年硒吩聚合物/寡聚物在有机太阳能电池(OSCs)、场效应晶体管(FETs)、发光二级管(LED)等方面的研究进展。目前,基于聚硒吩并[3,4-b]硒吩-苯并二硒吩(PSeB2)(polyselenopheno[3,4-b]selenophene-co-benzodiselenophene)本体异质结太阳能电池器件的能量转化效率最高,达6.87%;场效应晶体管方面,基于PSeDPP(P28)器件的空穴迁移率最高达1.62cm2.V-1.s-1。基于PFO-DDSTQ(一种硒吩芴基聚合物)的发光二级管,表现出目前基于硒吩化合物的最长波长发光器件,EL光谱峰值约860nm。通过对研究者的研究成果的总结发现,在有机光电器件的应用领域中硒吩聚合物/寡聚物是一种极具应用前景的材料。     

Yb3+/Tm3+共掺杂的钨酸镉纳米晶发光性能的研究

本文采用水热法制备了稀土离子Yb³⁺/Tm³⁺共掺杂的钨酸镉纳米晶。运用X-射线粉末衍射、场发射环境扫描电子显微镜和光谱分析对制备的样品的结构和发光性能进行了表征。根据XRD图谱可知, 钨酸镉为单斜晶系, 晶粒平均尺寸在28 nm左右。从ESEM图片可明显看出, 钨酸镉呈纳米棒结构, 直径在30 nm左右, 长径比在5~8之间。利用980 nm半导体激光器激发钨酸镉纳米晶得到样品的发射光谱, 存在一个较强的蓝光发射, 发光峰位于481 nm,对应于Tm³⁺的¹G₄→³H₆能级的跃迁, 分析了Tm³⁺/Yb³⁺离子共掺体系的发光机制。讨论了发光强度随稀土离子浓度的变化, 当Tm³⁺离子的掺杂浓度在2%, Yb³⁺/Tm³⁺物质的量浓度比为10:1时钨酸镉纳米晶的发光强度最强。根据泵浦功率与发光强度之间的关系, 可知处于481 nm的蓝光发射属于三光子过程, 由发光强度与掺杂浓度之间的双对数衰减曲线可知, 引起蓝光发射源于Tm³⁺的电偶极跃迁。     

4-十二烷氧基苄胺在纳米金微粒合成中的应用

以新型表面活性剂4-十二烷氧基苄胺(C12OBA)构成的C12OBA/正丁醇/正庚烷/丙醛/HAuCl4(aq)反相微乳液作为微反应器,利用微波辐射加热-丙醛还原法制备了C12OBA包覆金纳米微粒;利用透射电镜、傅立叶变换红外光谱仪及X射线衍射仪分析了产物的微观形貌、化学键合特征、晶体结构;并测定了其紫外-可见吸收光谱.结果显示,表面活性剂C12OBA既可参与形成稳定的反相微乳液,又可作为金纳米微粒的良好保护剂.反相微乳液液滴的微小水核以及C12OBA/金的物质的量之比对纳米金微粒的尺寸和形貌起到良好的控制作用.     

气相色谱-质谱法对鲜水果中5种保鲜剂残留量的同时测定

建立了气相色谱-质谱法(GC-MS)同时测定鲜水果中对羟基苯甲酸甲酯、对羟基苯甲酸乙酯、乙萘酚、4-苯基苯酚和联苯醚5种保鲜剂的分析方法。鲜水果样品经乙醚超声提取、浓缩后,活性炭柱净化,选择离子模式(SIM)下测定,外标法定量。在优化条件下,5种保鲜剂的线性范围为0.2～4.0 mg/L,相关系数(r2)大于0.991,联苯醚的检出限为0.05 mg/kg,其余4种保鲜剂的检出限均为0.1 mg/kg。5种保鲜剂的加标回收率为80.4%～104.5%,相对标准偏差(RSD)为1.2%～6.4%。该方法简便、快速、试剂价廉易得,且能消除鲜水果样品中色素等杂质的干扰,具有较高的准确度和精密度,适用于鲜水果中上述5种防腐保鲜剂残留量的测定。     

MgO脱除HCN的动力学研究

研究了MgO在不同温度下对HCN的脱除作用,并用XRD对反应后固相产物进行分析。研究了温度、MgO质量分数、HCN初始体积分数和停留时间等因素对HCN脱除效率的影响,并求出MgO与HCN反应的动力学参数。结果表明,673 K时,MgO已经开始与HCN发生反应,当温度高于873 K时,HCN中气态"N"已转化到固相产物MgCN₂中;HCN脱除效率随温度、MgO质量分数和停留时间的增加呈线性增加,但随HCN初始体积分数增加呈负幂函数的规律下降;MgO与HCN的反应级数α为0.72,表观活化能E为32.2 kJ/mol。