Metal-free and base-free decarboxylation of substituted cinnamic acids in a deep eutectic solvent

Abstract

A metal-free and base-free strategy was developed in DES to synthesize styrenes for the first time by decarboxylation of cinnamic acid derivatives, which provided a renewable and cost efficiently protocol to access various styrenes including those with functional groups such as 4-vinylphenol and 1-chloro-4-vinylbenzene.     

Filling a Gap: The Coordinatively Saturated Group 4 Carbonyl Complexes TM(CO)8 (TM=Zr,Hf) and Ti(CO)7

Homoleptic Group 4 metal carbonyl cation and neutral complexes were prepared in the gas phase and/or in solid neon matrix. Infrared spectroscopy studies reveal that both zirconium and hafnium form eight-coordinate carbonyl neutral and cation complexes. In contrast, titanium forms only the six-coordinate Ti(CO)₆⁺ and seven-coordinate Ti(CO)₇. Titanium octacarbonyl Ti(CO)₈ is unstable as a result of steric repulsion between the CO ligands. The 20-electron Zr(CO)₈ and Hf(CO)₈ complexes represent the first experimentally observed homoleptic octacarbonyl neutral complexes of transition metals. The molecules still fulfill the 18-electron rule, because one doubly occupied valence orbital does not mix with any of the metal valence atomic orbitals. Zr(CO)₈ and Hf(CO)₈ are stable against the loss of one CO because the CO ligands encounter less steric repulsion than Zr(CO)₇ and Hf(CO)₇. The heptacarbonyl complexes have shorter metal−CO bonds than that of the octacarbonyl complexes due to stronger electrostatic and covalent bonding, but the significantly smaller repulsive Pauli term makes the octacarbonyl complexes stable.     

二维纳米片层孔洞化策略及组装材料在超级电容器中的应用

功率密度高、倍率性能优异和循环性能好等特性使得超级电容器在储能领域显示了巨大的应用前景。尽管二维层状材料剥离形成的纳米片层不仅可为电化学反应提供独特的纳米级反应空间,而且由其组装的层状纳米电极材料具有化学和结构上的氧化还原可逆性及纳米片层水平方向上离子或电子快速传输通道。但是,纳米片层组装电极材料在纳米片层垂直方向上离子或电子传输存在障碍,对于超级电容器功率密度和能量密度的提高及实现快速能量储存非常不利。因此,如何通过改善离子或电子的快速传输,实现超级电容器大功率密度下的高能量密度是超级电容器电极材料发展的方向之一。本文主要综述了二维层状材料剥离成纳米片层,纳米片层孔洞化策略及组装孔洞化材料在超级电容器电极材料中的应用。纳米层孔洞化技术是改善层状电极材料在纳米片层垂直方向离子或电子传输的有效手段,为实现高比电容下的高倍率性能超级电容器电极材料制备提供了方法学。最后,对开发大功率密度下的高能量密度超级电容器电极材料提出了展望。     

纳米银/二维石墨相氮化碳/还原氧化石墨烯复合材料的制备及其光催化降解抗生素

为优化石墨相氮化碳(g-C₃N₄)光催化剂的结构,改善其对污染物的降解性能,本文以三聚氰胺为前驱体,通过高温煅烧和热氧化剥离制备了二维石墨相氮化碳(2D-C₃N₄),并用光还原法一步合成纳米银/二维石墨相氮化碳/还原氧化石墨烯(Ag/2D-C₃N₄/rGO)复合光催化剂。通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)、光致发光光谱(PL)、X射线光电子能谱(XPS)、氮气吸附脱附等温曲线(BET)等对材料进行表征。 以头孢曲松钠为目标污染物,探究pH值、催化剂用量、头孢曲松钠初始浓度等因素对催化剂的吸附、降解性能的影响,并探究降解反应机理。 当pH=6.0,催化剂用量为0.3 g/L,头孢曲松钠初始浓度为10.0 mg/L时,复合材料对头孢曲松钠的降解率可达到89.1%。 催化剂的稳定性较强,具有实际应用价值,可用于处理含头孢类抗生素的废水。     

三维无溶剂含能Ag-MOF的制备、热分解动力学及爆炸性能

Solvent molecules can significantly reduce the heat of detonation and stability of energetic metal-organic framework (EMOF) materials, and the development of solvent-free EMOFs has become an effective strategy to prepare high-energy density materials. In this study, a solvent-free EMOF, [Ag₂(DTPZ)]_n (1) (N% = 32.58%), was synthesized by reacting a high-energy ligand, 2, 3-di(1H-tetrazol-5-yl)pyrazine (H₂DTPZ), with silver ions under hydrothermal conditions, and it was structurally characterized by elemental analysis, infrared spectroscopy, X-ray diffraction, and thermal analysis. In 1, the DTPZ²⁻ ligands that adopted a highly torsional configuration bridged the Ag⁺ ions in an octadentate coordination mode to form a three-dimensional framework (ρ = 2.812 g∙cm⁻³). The large steric effect and strong coordination ability of DTPZ²⁻ effectively prevented the solvent molecules from binding with the metal centers or occupying the voids of 1. Moreover, the strong π-π stacking interactions [centroid-centroid distance = 0.34461(1) nm] between the tetrazole rings in different DTPZ²⁻ ligands provided a high thermal stability to the framework (T_e = 619.1 K, T_p = 658.7 K). Thermal analysis showed that a one-step rapid weight loss with intense heat release primarily occurred during the decomposition of 1, suggesting potential energetic characteristics. Non-isothermal thermokinetic analyses (based on the Kissinger and Ozawa-Doyle methods) were performed using differential scanning calorimetry to obtain the thermoanalysis kinetic parameters of the thermodecomposition of 1 (E_a = 272.1 kJ·mol⁻¹, E_o = 268.9 kJ·mol⁻¹; lgA =19.67 s⁻¹). The related thermodynamic parameters [enthalpy of activation (ΔH^≠ = 266.9 kJ·mol⁻¹), entropy of activation (ΔS^≠ = 125.4 J·mol⁻¹·K⁻¹), free energy of activation (ΔG^≠ = 188.3 kJ·mol⁻¹)], critical temperature of thermal explosion (T_b = 607.1 K), and self-accelerating decomposition temperature (T_SADT = 595.8 K) of the decomposition reaction were also calculated based on the decomposition peak temperature and extrapolated onset temperature when the heating rate approached zero. The results revealed that 1 featured good thermal safety, and its decomposition was a non-spontaneous entropy-driven process. The standard molar enthalpy for the formation of 1 was calculated to be (2165.99 ± 0.81) kJ·mol⁻¹ based on its constant volume combustion energy determined using a precise rotating oxygen bomb calorimeter. Detonation and safety performance tests revealed that 1 was insensitive to impact and friction, and its heat of detonation (10.15 kJ·g⁻¹) was higher than that of common ammonium nitrate explosives, such as octogen (HMX), hexogene (RDX), and 2, 4, 6-trinitrotoluene (TNT), indicating that 1 is a promising high-energy and insensitive material.     

光纤光谱仪的多样化组装及应用——介绍一个仪器分析实验

介绍了一个本科生的仪器分析实验——光纤光谱仪的多样化组装及应用。利用光源、光纤和电荷耦合器件检测器等部件,组装出紫外-可见光谱仪、分子荧光光谱仪、近红外光谱仪、拉曼光谱仪和激光诱导荧光光谱仪。通过本实验,不仅能够拓展传统光学实验的内容,而且可以通过自己动手组装仪器,培养学生的专业实践能力和知识应用能力。     

Co_2Si@C催化剂的合成及其加氢脱硫性能

采用微波法制备了Co_2Si@C催化剂并对其在加氢脱硫反应中的催化性能进行了研究.通过XRD、 XPS、 TEM和N_2-物理吸附表征分析Co_2Si@C催化剂的组成和结构. Co_2Si@C催化剂具有一致的介孔结构,高钴含量(21%)、高比表面积(116.6 m~2·g~(-1))和均匀分布的纳米粒子.由于硅原子对钴原子结构和参数的修饰、纳米粒子效应和高金属含量等因素, Co_2Si@C催化剂在温和的反应条件下(340℃和3.0 MPa)具有良好的加氢脱硫活性和对直接脱硫(DDS)反应途径的高选择性,产物联苯的选择性超过了60%.     

两种表征核酸适配体-靶蛋白亲和作用的毛细管电泳方法比较

适配体-靶分子间的亲和作用表征是理解和应用核酸适配体发挥特异亲和作用的基本前提,CE技术则为上述表征提供了多模式的简捷途径,但多种模式体系间的结果往往存在差异,导致CE亲和评价可靠性和进一步应用受到限制,亟须建立多CE方法测定适配体-靶分子间亲和作用的系统比较研究。该研究以凝血酶及其特异性作用于肝素结合位点的适配体29mer为模型体系,基于CE-激光诱导荧光检测,引入CE-迎头分析（FA）评价方法,并比较其与预平衡-毛细管区带电泳（PE-CZE）的异同。首先进行了CE-FA方法分离条件的优化,37 ℃、0.5 h孵育完全后进样,进样时间为30 s,在较低工作温度（15 ℃）、较短毛细管长度（30 cm）及生物相容性好的缓冲体系2×TG（Tris-甘氨酸缓冲液,pH 8.5）条件下,经15 kV分离时,得到了稳定的荧光标记29mer（F29mer）-凝血酶复合物及游离F29mer平台峰。加入1 g/L牛血清白蛋白（BSA）,有效提高了CE-FA平台峰高及迁移时间的重复性。详细讨论了两种方法下6种拟合方式的结果及特点。针对CE-FA和PE-CZE法,以结合适配体/游离适配体的浓度比对游离适配体浓度非线性拟合、平台峰高变化对浓度间的非线性拟合、平衡混合物的非平衡CE（NECEEM）计算等进行拟合。结果表明,6种拟合结果中5种不存在显著性差异,得到的解离常数（K_d）值均介于24~64 nmol/L范围。CE-FA法中的3种拟合结果符合度较好,说明CE-FA法易于在非平衡的CE分离体系下保持适配体-复合物间的结合-解离平衡,所测得K_d准确度较高。PE-CZE法中,借由降低的游离F29mer峰高对凝血酶浓度间的非线性拟合所得K_d值偏差过大;选择凝血酶浓度为F29mer浓度的0.5~2倍,且观察到明显的两峰间"指数桥"为前提,可经NECEEM法进行数据计算求解得到较为准确的K_d值。CE-FA法可与PE-CZE法互为印证,提高了亲和作用评价的可靠性。首选推荐使用多浓度平台峰高变化进行非线性拟合的CE-FA法,可相对有效克服高压电场对复合物稳定性的影响,具有适用范围广、方法稳定、结果拟合简便准确等特点。     

基于“1+2”模式的结构化学课程在线教学实践

Since the outbreak of novel coronavirus pneumonia (NCP) at the beginning of this year, Chinese government acted immediately and made some regulations to control the epidemic NCP and promote the recovery of society and industry including education. Chinese universities stayed on the online courses without suspension on teaching and learning. Herein, we report online teaching of structural chemistry course based on the teaching mode of online live broadcast platform, online course resources and management platforms ("1 + 2" mode). This may promote online teaching, and take advantage of online live broadcast and massive open online courses, which achieves good teaching and learning experiences on structural chemistry course.     

Short-focus nematic liquid crystal microlens array with a dielectric layer

ABSTRACT

A short-focus microlens array using dielectric layer and inhomogeneous electric field over a homogeneous nematic liquid crystal (LC) layer is proposed. The top substrate has a planar indium tin oxide (ITO) electrode which is coated on the inner surface. The bottom substrate has strip ITO electrodes which are embedded in the dielectric layers. The inhomogeneous electric field generates a required gradient refractive index profile within the LC layer which, in turn, causes the focusing effect. Due to the thinner LC layer (15 μm), the spherical aberration should be negligible. Moreover, the fabrication process of the proposed microlens array can be easily carried out because of the layer-by-layer configuration. The simulation results show that the focal length of the LC microlens can be continuously tuned from infinity to 0.988 mm with the change of applied voltage.