ZnCuCoAlNO3型四元水滑石及其多氧阴离子柱撑物的合成与催化氧化性能

Anionic clay, ZnCuCoAlNO₃ and its polyoxometalate intercalates were synthesized, and were characterized by XRD, IR, ³¹PMAS NMR, DTA and elemental analysis. The pillared products are found to be effective catalysts for oxidation of cyclohexene with molecular oxygen under mild reaction conditions     

Sexing Bovine Embryos Using PCR Amplification of Bovine SRY Sequence

This study analyses the bovine SRY DNA sequence by direct sequencing procedure, followed by the designation of the PCR primers specific for bovine SRY. Using PCR amplification of bovine SRY gene, the embryo sex was determined. The results of the embryo sex identification were confirmed after the embryo transfer and pregnancies.     

氧化铝的改性及其在合成气直接制二甲醚反应中的应用

 采用浸渍法制备了经硼、磷和硫的含氧酸根阴离子改性的γ-Al2O3, 以其为甲醇脱水活性组分,与铜基甲醇合成活性组分CuO-ZnO-Al2O3组成双功能催化剂,并在连续流动加压固定床反应器上考察了催化剂对合成气直接制二甲醚反应的催化性能. 结果表明, SO2-4改性可以显著提高γ-Al2O3的甲醇脱水活性,从而提高产物中二甲醚的选择性和一氧化碳的转化率. 此外,还详细研究了SO2-4改性条件如SO2-4含量、焙烧温度及前驱物种类的影响. 结果表明,当SO2-4含量为10%, 焙烧温度为550 ℃时,二甲醚的选择性及一氧化碳的转化率最高; SO2-4前驱物的种类对其改性效果的影响很小.     

dl—2,3—二氰基—2,3—二（3,4—二甲氧基苯基）丁二酸二乙酯的晶体和分…

用Ｘ射线晶体结构分析法测定和分析了ｄｌ－２，３－二氰基－２，３－二（３，４－二甲氧基苯基）丁二酸二乙酯的分子结构和晶体结构。晶体学数据为：Ｃ２６Ｈ２８Ｎ２Ｏ８，Ｍｒ＝４９６．５２，空间群Ｐ１，ａ＝１２．０４７（１），ｂ＝１３．２７１（１），ｃ＝８．７２８（２）Ａ，ａ＝９０．７１（１），β＝１０８．８１（１），γ＝８４．８７（１）°，Ｖ＝１３１５．４（２）Ａ＾３，Ｚ＝２，Ｄｃ＝１．２５４ｇ／ｃｍ＾３     

MoO3、NiO、ZnO在小表面金红石上的分散行为

Dispersion of MoO3, NiO, ZnO on rutile TiO2 with low specific surface area was studied with Mercury Porosimeter, SEM, XPS and Ammonia Extraction method. The dispersion thresholds of MoO3, NiO, ZnO on three rutile TiO2 carriers were obtained with XPS, and com-pared with those on anatase TiO2 with high specific surf are area. Ammonia Extraction method was used to identify the surface oxide species interarting with support surface in different strength and it was found that the proportions of oxides that can not be extracted by ammonia extraction are different for MoO3, NiO and ZnO which are supported on rutile TiO2.     

MoO_3、NiO、ZnO在小表面金红石上的分散行为

氧化物、盐类在氧化物载体表面的自发分散是一种广泛存在的现象，文献中已报导过大量氧化物和盐类在高比表面载体上分散的研究结果［'－3］TIO。作为一种较新型的载体，与Y－AI。O。、硅胶等传统载体相比，有许多不同特性．活性组分在TIO。表面的分散状态及所得催化剂的性能已有不少报导［'－'］，但所用的TIOZ主要是较高比表面的锐钛矿型TIOZ（刘金红石型TIO。（r）和锐钛矿型TIOZ（a）的结构不同，它是高温生成相，比表面较小［'］．氧化物在金红石上的分散行为仍未见报导．我们制备了三种具有不同比表面的TIO水），系统地研…     

电化学方法在重有机合成中的应用——一、丙烯腈加氢二聚合成己二腈 二、已二腈电解加氢合成己二胺

1.绪言高分子工业的发展,需要探索原料合成的新方法,以滿足获得高分子单体的需要。在解决以上間題方面,新的电化学方法近年来得到了发展,已二胺是合成尼龙纤维的重要原料。目前合成己二胺的最好方法是将已二酸在400℃时与氨的催化反应其他較重要的方法有:1,4-二氯丁烷与腈化鈉作用得己二腈而后     

有机硅改性聚氨酯的合成与性能

在无溶剂条件下利用二步法合成了一系列氨基硅油改性聚氨酯,采用红外光谱对预聚体进行了表征,同时测试了材料的力学性能、耐热性、表面水接触角及微观形态,结果表明,改性后的聚氨酯具有优良的力学性能、耐热性及表面疏水性,且材料呈微观相分离形态。     

Application of the first collision source method to CSNS target station shielding calculation

Ray effects are an inherent problem of the discrete ordinates method. RAY3 D, a functional module of ARES, which is a discrete ordinates code system, employs a semi-analytic first collision source method to mitigate ray effects. This method decomposes the flux into uncollided and collided components, and then calculates them with an analytical method and discrete ordinates method respectively. In this article, RAY3 D is validated by the Kobayashi benchmarks and applied to the neutron beamline shielding problem of China Spallation Neutron Source(CSNS)target station. The numerical results of the Kobayashi benchmarks indicate that the solutions of DONTRAN3 D with RAY3 D agree well with the Monte Carlo solutions. The dose rate at the end of the neutron beamline is less than10.83 μSv/h in the CSNS target station neutron beamline shutter model. RAY3 D can effectively mitigate the ray effects and obtain relatively reasonable results.