单体极性对甲基丙烯酸甲酯/丙烯酸丁酯/甲基丙烯酸钠无皂乳液共聚合的影响

研究了少量甲基丙烯酸钠（ＮａＭＡ）存在下单体极性对甲基丙烯酸甲酯（ＭＭＡ）／丙烯酸丁酯（ＢＡ）无皂乳液共聚合的影响．单体极性降低，使粒径减小、聚合速率提高、乳液表面张力和粘度降低、粒子表面电荷密度增大、聚合物分子量提高．ＭＭＡ／ＮａＭＡ无皂乳液聚合物只呈现一个玻璃化温度Ｔｇ，ＢＡ／ＮａＭＡ无皂乳液聚合物呈现两个Ｔｇ，ＭＭＡ／ＢＡ比为２∶１～１∶２的ＭＭＡ／ＢＡ／ＮａＭＡ无皂乳液聚合物呈现四个Ｔｇ，这是由于粒子外面相对富含ＯＳＯ－３和ＣＯＯ－基聚合物的亚层溶解了较多的水，使ＢＡ向粒子中心扩散，ＭＭＡ向外扩散，造成组成差异和相分离而引起的．     

Investigation of photoinduced electron transfer in model system of vitamin E-duroquinone by time-dependent density functional theory

Photoinduced electron transfer of the model system composed of vitamin E and duroquinone has been investigated using time-dependent density functional theory. Calculations for the excited states tell that the photoexcitation of the model system can directly yield the charge transfer states in which the vitamin E moiety is positively charged but the duroquinone moiety is negatively charged. Our theoretical investigations indicate that the second charge transfer state of the model system can also be produced through the decay of higher locally excited state S(4). Since S(4) state in the model system corresponds to S(1) state of the isolated duroquinone used as a model for peroxyl radical, and S(2) state has the character of electron transfer from the tertiary amine group of the vitamin E moiety to the duroquinone moiety, the decay from S(4) to S(2) corresponds to the dynamic process following the photoexcitation of the duroquinone moiety of the model system, i.e., the initial stage of antioxidant reaction of vitamin E. Calculations of the kinetic parameters for the electron transfer have been carried out in the framework of the Marcus-Jortner-Levich formalism. Our calculations confirm that the electron transfer from S(4) to S(2) possesses the character of the inverted regime and the barrier is negligibly small.     

室温以上磁制冷材料La(Fe1-xCox)11.7Al1.3化合物的研究

通过X射线衍射分析和超导量子干涉磁强计（SQUID）磁性测量,研究了Co替代Fe含量对居里温度在室温以上的磁制冷材料La（Fe1-xCox）11.7Al1.3（x=0.072,0.081）磁结构和磁性能的影响。La（Fe1-xCox）11.7Al1.3材料的居里温度随Co的含量增加而增加,La（Fe0.919Co0.081）11.7Al1.3的居里温度为311 K。当外场变化为1.9 T时磁熵变达到3.6 J·kg^-1·K^-1,RCP值为168.6 J·kg^-1,虽然它的磁熵变小于具有巨磁熵变的磁制冷材料,但是它在磁场为1.9 T时的制冷能力与这些材料相当。     

Synthesis, crystal structure and equilibrium studies on the bidentate amine adducts of bis(S-methyl-β-N-(4-methyloxyphenyl) methylendithiocarbazide)nickel(II) complex

The crystal structure of the 1,10-phenanthroline bis(S-methyl-β-N-(4-methyloxyphenyl)methylendithiocarbazide)nickel(II) adduct, (Ni(SN)₂phen) [SN = S-methyl-β-N-(4-methyloxyphenyl)methylendithiocarbazide, PHEN = phenanthroline], has been determined by single crystal X-ray diffraction. The nickel atom is in an octahedral environment, surrounded by two chelating SN ligands and one chelating phen molecule. The nitrogen atoms from phen are in the cis configuration. The other chelating diamines adducts of the parent complex (Ni(SN)₂) were also studied, where the chelating diamnies are 5-nitro-1,10-phenanthroline(NO₂phen), 2,2′-bipyridine (bipy), 4,4′-methyl-2,2′-bipyridine (Mebipy). The equilibria were determined by UV-vis spectrometry in dichloromethane. The coordination ability of the added ligands were influenced by substitute groupings and steric factors. From the structure and addition equilibrium studies, the possible addition mechanisms are also discussed.     

HCl-NaCl-C3H8O3-H2O体系溶液热力学性质

在恒定丙三醇质量分数x=0．1的条件下，测定了无液接电池（A）和电池（B）的电动势根据电池（A）电动势确定了丙三醇和水混合溶剂中的Ag－AgCl电极的标准电极电势，讨论了HCl的迁移性质；由电池（B）测得的电动势计算了HCl在该体系中的活度系数γA，计算的结果表明，对于所讨论的体系，在溶液中总离子强度保持恒定，HCl的活度系数服从Harned规则．在溶液组成恒定时，IgγA是温度倒数1／T的线性函数，讨论了混合物中HCl的相对偏摩尔焓及介质效应．     

Determination of Tiopronin in Human Plasma by SPE then Reversed-Phase HPLC–UV

An accurate, simple and sensitive method based on reversed-phase high-performance liquid chromatography with UV detection has been developed for determination of tiopronin (TP) in human plasma. TP in plasma was reacted with p-bromophenacyl bromide (p-BPB) to give the TP-p-BPB adduct and this derivative was then extracted from the plasma on a silica gel cartridge. Potential interfering compounds were removed by washing with water, and the TP-p-BPB adduct was then eluted with acetonitrile. The organic phase obtained was evaporated to complete dryness under a stream of nitrogen. The residue was dissolved in acetonitrile and this solution was injected on to a reversed-phase ODS HPLC column. The mobile phase was usually the ternary mixture acetonitrile–water–trifluoroacetic acid, 40:59.88:0.12 (v/v). The retention times of TP-p-BPB and the internal standard adduct were 14.4 and 17.9 min, respectively. No interfering peaks were encountered in several blank plasma samples examined. The limit of detection for TP was 12 ng mL^?1. Extraction recovery exceeded 70%. The calibration plot for the TP derivative was linear in the range 40?4000 ng mL^?1, regression coefficient 0.9989, and the coefficient of the variation of the points of the calibration plot was below 10%. The method was validated appropriately and successfully applied to the determination of TP in human plasma.     

Amperometric glucose biosensor based on electrodeposition of platinum nanoparticles onto covalently immobilized carbon nanotube electrode

A new amperometric biosensor for glucose was developed based on adsorption of glucose oxidase (GOx) at the gold and platinum nanoparticles-modified carbon nanotube (CNT) electrode. CNTs were covalently immobilized on gold electrode via carbodiimide chemistry by forming amide linkages between carboxylic acid groups on the CNTs and amine residues of cysteamine self-assembled monolayer (SAM). The fabricated GOx/Au_nano/Pt_nano/CNT electrode was covered with a thin layer of Nafion to avoid the loss of GOx in determination and to improve the anti-interferent ability. The immobilization of CNTs on the gold electrode was characterized by quartz crystal microbalance technique. The morphologies of the CNT/gold and Pt_nano/CNT/gold electrodes have been investigated by scanning electron microscopy (SEM), and the electrochemical performance of the gold, CNT/gold, Pt_nano/gold and Pt_nano/CNT/gold electrodes has also been studied by amperometric method. In addition, effects of electrodeposition time of Pt nanoparticles, pH value, applied potential and electroactive interferents on the amperometric response of the sensor were discussed.

The enzyme electrode exhibited excellent electrocatalytic activity and rapid response for glucose in the absence of a mediator. The linear range was from 0.5 to 17.5 mM with correction coefficient of 0.996. The biosensor had good reproducibility and stability for the determination of glucose.     

Physical and chemical properties of a durably efficacious ammonium bicarbonate as a fertilizer and its yield-increasing mechanism

A new fertilizer of cocrystal type,known as durably efficacious ammonium bicarbonate (DEAB),has been developed by adding a certain amount of dicyandiamide (DCD) as an ammonia-stabilizing agent to ammonium bearbenate(AB)during the process of its production.As compared with AB,DEAB was found to have a reduction of direct volatilization loss by 53%,a fertilizer availability period prolonged from 35-45 to 90-110 d,and an increase in the rate of nitrogen in fertilizer being utilized by 5.9%-10.2%,and a saving of the amount of fertilizer to be ap-phed by 20%-30% for the same level of yield,or an increase of the crop yield by over 10% for the same level of ni-tregen fertilization;in addition,it was found to show usually a function of promoting the crop to early mature.It can be apptied as basal dressing all in one time to soil and thus also used as a labour-saving and crop yield-increasing fertil-izer for is non-mtertillage,plastics film covering and water-saving agriculture     

Effects of Calcination Temperature on the Acidity and Catalytic Performances of HZSM-5 Zeolite Catalysts for the Catalytic Cracking of n-Butane

The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature (excluding 800 ℃). The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature.The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.     

Chemiluminescence flow injection analysis of 1,3-dichloro-5,5-dimethylhydantoin in swimming pool water

A new chemiluminescence (CL) flow-injection method is proposed for the determination of 1,3-dichloro-5,5-dimethylhydantoin (DDH). The method is based on the chemiluminescent reaction of DDH and luminol-H(2)O(2) in an alkaline medium (pH 12.0-12.5). The concentration of the analyte shows a good linear relationship with the produced luminescence intensity in the range of 3.0x10(-8) to 8.0x10(-6) mol l(-1). The detection limit of the proposed method is 1.0x10(-8) mol l(-1) and the relative standard deviation (R.S.D.) is 4.7% (n=5) at 5.0x10(-7) mol l(-1). This method was successfully applied to the determination of trace amounts of this disinfectant in water samples obtained from five different swimming pools. Satisfying recovery values were also obtained.