(111)择优取向的Pb(Zr0.52Ti0.48)O3铁电薄膜的制备及研究

选用不同浓度的Pb(Zr_0.52Ti_0.48)O₃溶胶，用Sol-gel法在Pt/Ti/SiO₂/Si基片上沉积一层厚度不同的Pb(Zr_0.52Ti_0.48)O₃ (PZT52)过渡层，经400℃烘烤、550℃退火等程序后，再用Sol-gel法在PZT52过渡层上沉积Pb(Zr_0.52Ti_0.48)O _{关键词： PZT铁电薄膜 择优取向 过渡层 剩余极化强度}     

The Calibrating Theory in the Network Parameters Measurement of Microwave and MMW Devices

The paper introduces a special system calibration technology in s-parameters measurement of microwave and millimeter wave devices. The 8-term errors module is built by analyzing the signals flowing in the measurement system. Then the calibration technology using non-standard kits is designed on the base. Finally, the experiment using the calibration technology is introduced.     

Challenging Students to View the Concept of Area in Triangles in a Broad Context: Exploiting the Features of Cabri-II

This study focuses on the constructions in terms of area and perimeter in equivalent triangles developed by students aged 12–15 years-old, using the tools provided by Cabri-Geometry II [Labore (1990). Cabri-Geometry (software), Université de Grenoble]. Twenty-five students participated in a learning experiment where they were asked to construct: (a) pairs of equivalent triangles “in as many ways as possible” and to study their area and their perimeter using any of the tools provided and (b) “any possible sequence of modifications of an original triangle into other equivalent ones”. As regards the concept of area and in contrast to a paper and pencil environment, Cabri provided students with different and potential opportunities in terms of: (a) means of construction, (b) control, (c) variety of representations and (d) linking representations, by exploiting its capability for continuous modifications. By exploiting these opportunities in the context of the given open tasks, students were helped by the tools provided to develop a broader view of the concept of area than the typical view they would construct in a typical paper and pencil environment.     

一类广义Schrdinger算子的自伴性与本质谱

本文在一类 Ｌｐ位势Ｖ（ｘ）下建立了广义Ｓｃｈｒｏｄｉｎｇｅｒ算子Ｈ＝（－Δ）ｍ＋Ｖ（ｘ）在Ｃ∞０（Ｒｎ）上的本质自伴性，给出了Ｈ的本质谱的分布．     

高频强泵浦场激发的等离子体参量不稳定性的特性

本文论证了当泵浦波的强度足够强时,在相当普遍的条件下,对均匀等离子体,唯一可以发生的参量不稳定性是类似于弱场的振荡二束不稳定性(OTSI)。对均匀及弱不均匀等离子体,高频强泵浦场激发的参量不稳定性都是绝对不稳定性。同样的性质在磁化等离子体中也可以得到。 关键词：     

激光等离子体2660紫外探针及干涉系统

成功地在六路高功率Nd玻璃激光装置上建立了2660紫外激光探针和适合紫外波段的Normaski干涉仪,首次将可见波长的连续激光应用于紫外干涉仪中靶成像调整和光路准直。利用该紫外光干涉仪,在铜柱状靶(φ500μm)上测量了厚等离子体中高达0.6n。的电子密度。     

Error analysis: a tool for selecting travel demand models

In developing travel demand models it is generally assumed that the base-year data used in developing the parameters, as well as the forecasted data to be used as independent variables for the design year, are of acceptable quality. The purpose of this paper is to present the application of error propagation theory in assesing the predictive quality of one type of travel demand forecasting model (multinomial logit models) and to demonstrate how error considerations can be used as a tool for identifying the optimal model. The general conclusions of this study are that: (1) it is indeed possible to quantify errors in dependent variables in logit models as a consequence of errors in independent variables; and (2) error consideration can be used as a tool for identifying the optimal model from a set of candidate models. Further research is recommended to develop better insights into the phenomenon of error propagation so that the consideration of errors can be a factor in decisions on model selection.     

ZnS中电子陷阱能级对光生电子弛豫过程的影响

采用微波吸收法,测量了在不同助熔剂条件及不同气氛下烧制的ZnS材料受到超短激光脉冲激发后的光电子衰减过程,并且测量了材料的热释光曲线。样品A采用过量的SrCl作为助熔剂,在1150℃下灼烧制备而成;其热释光曲线显示材料中有浅电子陷阱,电子陷阱密度小,光生电子衰减过程为双指数衰减过程,快过程寿命为45ns,慢过程寿命为312ns。样品B中加入了少量的NaCl作为助熔剂;热释光曲线显示有浅电子陷阱和深电子陷阱,且都有较高的密度,其光电子寿命为1615ns。在NH₄Br气氛中烧制样品C,热释光谱显示只有浅电子陷阱形成,光电子寿命为1413ns。结果表明材料的光电子寿命和浅电子陷阱密切相关,浅电子陷阱密度越大,光生电子寿命越长,深电子陷阱对光生电子瞬态过程影响很小。     

SN方法粒子输运计算程序自动建模关键技术问题研究

在充分调研和分析SN方法粒子输运计算程序自动建模方法的基础上，对建模过程中的模型文件格式识别、属性编辑、空腔处理及自动划分离散网格等关键技术问题进行了研究，并提出了合理可行的解决方法。通过对SNAM程序建模部分功能测试，验证了这些方法的正确性和有效性。This paper presents two approaches to enhance the geometry modeling ability of SN particle transport simulation codes and focus on the key issues that lie in the processing from CAD model to SN code geometry model, e.g. CAD file format support, void modeling, mesh generation and model-editing. SNAM （SN Automatic Modeling system） has been developed as an interface code between commercial CAD software and SN particle transport simmulation codes. The testing results have shown that the algorithm and implementation used in SNAM are efficient and capable of all the necessary processing from CAD model to SN geometry model.     

高Z等离子体中的双电子复合与电子碰撞激发

 采用准相对论性Hartree-Fock-Relativistic方法与不可分辨跃迁组模型相结合，对Au和Ta元素的类Ni离子的双电子复合速率，以及Au元素类Cu离子的电子碰撞激发速率进行了计算。计算结果表明，对于Au类Ni离子的3d¹⁰-3d⁹4l5f-3d¹⁰4l双电子复合过程以及类Cu离子的3d¹⁰4l-3d⁹4l5f电子碰撞激发过程，当电子温度高于1.0 keV时，电子离子碰撞激发速率随电子温度增加而增加，双电子复合速率随电子温度增加而减小，并且电子碰撞激发对谱线辐射的贡献要比双电子复合大得多。