修饰吡啶衍生物的染料敏化光阳极水氧化性能的研究

染料敏化光电化学电池(DSPECs)是构建人工光合作用体系的潜在方式,其优势在于可通过优化染料结构来拓展可见光吸收范围,从根本上提高太阳能利用效率.染料敏化光阳极在受激发产生电荷分离之后,激发电子注入TiO₂半导体导带,由于其导带位置比传统的可见光半导体,如BiVO4和Fe3O4等相比较负,因此理论上可以在较小的偏压下取得较大的光电转换效率,也更有利于和光阴极相耦合实现无偏压分解水.电荷传输动力学研究表明,注入到TiO₂导带的电子向氧化态光敏剂和催化剂的回传是造成体系能量损失的主要原因,集中体现在光电流密度和效率的降低.目前,已经报道了多种手段来减少DSPECs光阳极表面的电子回传,包括使用带有长烷基链的锚定基团对水氧化催化剂进行修饰,在半导体表面引入电子中介体以及使用核-壳结构的基底等.其中,SnO2/TiO₂基底被广泛应用在染料敏化光阳极中,这种基底可以提高光生电子的注入效率,同时两种金属氧化物之间的异质结有效抑制了电子回传,从而提高了DSPECs的光电活性.然而,核-壳结构基底需要使用原子层沉积技术来制备,所以操作相对复杂.本文基于Ru-bda(bda=2,2'-联吡啶-6,6'-二羧酸)结构的分子水氧化催化剂和带有磷酸修饰基团的三联吡啶钌通过共吸附的方式制备染料敏化光阳极,在不使用核-壳结构基底的情况下,利用吡啶衍生物对TiO₂电极表面的修饰来减少电子回传.本文利用一系列吡啶衍生物作修饰负载在TiO₂光阳极上(TiO₂|RuP,1;RuP=Ru(4,4'-(PO3H2)2-2,2'-联吡啶)(2,2'-联吡啶)2;1=Ru(bda)(L)2,bda=2,2'-联吡啶-6,6'-二羧酸,L=(10-吡啶-4-基氧基)癸基)膦酸.在100 mW/cm2的白光照射下(λ>400 nm),TiO₂|RuP,1,P1(P1=4-羟基吡啶)光阳极在0.4 V(vs.NHE)的外加偏压下获得了1 mA/cm2的光电流密度,其光电流比未修饰吡啶的光阳极增加了42%.同时,其入射光子-电流转化效率在470 nm波长的单色光光照下达到最大,为13.6%.经过吡啶衍生物所修饰的光阳极光电性能和文献中利用核-壳结构基底所制备的类似光阳极性能相当,且光电流密度随吡啶对位取代基供电性能的增强而增大.瞬态吸收光谱和电化学阻抗谱测试表明,吡啶吸附在光阳极上能有效地抑制界面上的电子回传,延长电荷分离寿命,是光电流增加的根本原因,这也表明有机小分子修饰是提高染料敏化光阳极性能的简单、有效的策略.     

哌啶并[2,3-b]哌嗪类衍生物的设计、合成及其抗血小板聚集活性研究

以2,3-二氨基吡啶和2,3-丁二酮为起始原料,经环化、催化氢化和亲核取代反应合成了10个新型哌啶并[2,3-b]哌嗪类衍生物(3a~3j),其结构经¹H NMR、¹³C NMR和HR-MS确证。体外抗血小板聚集活性研究表明,化合物3d、3e、3g、3h和3j具有一定的抗血小板聚集作用,其中化合物3h(IC₅₀=1.24mmol/L)的活性显著优于母体化合物川芎嗪(IC₅₀=3.96mmol/L)和阳性药物阿司匹林(IC₅₀=2.41mmol/L)。     

具有聚集诱导发光特性的含氟有机金属配合物的研究进展

近年来,具有聚集诱导发光(aggregation-induced emission,AIE)特性的化合物由于在聚集态或固态发光量子效率较高而受到很多关注.含氟的功能化合物,由于氟原子的存在,往往具有独特的结构和物理、化学及生物学性质.根据中心金属和配体的种类,汇总了具有A IE性质的且含有氟代配体的有机金属配合物的研究进展.这些含氟有机金属配合物主要是铱、铂、金配合物,在发光器件、化学传感、细胞成像、数据存储等方面具有潜在应用.还简要讨论了相关研究的发展前景.     

CO2 and photo-controlled reversible conversion of supramolecular assemblies based on water soluble pillar[5]arene and coumarin-containing guest

In this communication,a new supramolecualr amphiphile was successfully constructed based on water soluble pillar[5]arene and a unique guest which contain a CO₂ responsive tertiary amine unit and a UV responsive coumarin group.When guest molecule 1 dispersed in water,it self-assembled into sheet-like structures.Upon bubbling CO₂,1 transformed into 1 H due to the tertiary amine unit was protonated,accompany the nano-sheets transformed into vesicles.Further irradiation of 1 H with 365 nm light for 3 h,the coumarin group reacted with each other to form bola-type amphiphie 2 H.In this case,vesicles collapsed and re-assembled into nano-tubes.However,when addition of WPS into the solution of 1 H,the vesicles transformed into micelles,this is due to the formation of supramolecular amphiphile WP5&1 H.Upon irradiation of WP5&1 H with 365 nm light for 3 h,nano-ribbons observed instead of micelles in the solution.Notably,nanotubes from 2 H could also transform into nano-ribbons after adding WPS.The selfassembly process and the resultant assemblies were characterized by TEM,SEM,DLS,SAXS and NMR technologies.Due to both CO₂ and light are "green" for living organisms,we anticipated our system can offer the possibilities in "on demand" drug absorption and release.     

Synthetic studies towards(-)-deserpidine:Total synthesis of the stereoisomer and derivative of (-)-deserpidine

The asymmetric synthesis of 16,17,20-epi-deserpidine and a derivative of(-)-deserpidine has been achieved.Key feature s in the assembly of the pentacyclic framework include a visible-light photocatalytic intra-/inter-/intramolecular radical cascade reaction to construct the tetracyclic ABCD ring system in one-pot and an intramolecularaldol reaction to forge the cyclohexane E ring.     

Catalytic transfer hydrogenation of biomass-derived furfural to furfuryl alcohol with formic acid as hydrogen donor over CuCs-MCM catalyst

Catalytic transfer hydroge nation(CTH) of furfural(FF) to furfu ryl alcohol(FFA) has received great intere st in recent years.He rein,Cu-Cs bimetallic supported catalyst,CuCs(2)-MCM,was developed for the CTH of FF to FFA using formic as hydrogen donor.CuCs(2)-MCM achieved a 99.6% FFA yield at an optimized reaction conditions of 170℃,1 h.Cu species in CuCs(2)-MCM had dual functions in catalytically decomposing formic acid to generate hydrogen and hydrogenating FF to FFA.The doping of Cs made the size of Cu particles smaller and improved the dispersion of the Cu active sites.Impo rtantly,the Cs species played a favorable role in enhancing the hydrogenation activity as a promoter by adjusting the surface acidity of Cu species to an appropriate level.Correlation analysis showed that surface acidity is the primary factor to affect the catalytic activity of CuCs(2)-MCM.     

An Electron Paramagnetic Resonance Study of the Orbital Ordering Compound MgTi<Subscript>2</Subscript>O<Subscript>4</Subscript>

We report the electron paramagnetic resonance (EPR) studies of MgTi₂O₄ in the 300–140 K range. Above the transition temperature T _t (~258 K), the EPR results indicate that MgTi₂O₄ is paramagnetic. The parameters of the EPR spectra show an anomalous change at T _t. The clear EPR lines can be observed in temperature between T _t and 220 K. Besides that the EPR intensity, g value, and EPR linewidth increase with decreasing temperature; in temperature range below 220 K, no clear EPR line can be detected. The EPR spectra results demonstrate that magnetic spin-singlet state and the orbital density wave of MgTi₂O₄ system are formed gradually with decreasing temperature at low temperature range.     

Research on Quantitative Analytical Model for Determination of Phosmet by Using Surface Enhanced Raman SpectroscopySCIEI北大核心CSCD

Raman spectroscopy combined with surface enhanced technology was adopted for analysis of phosmet pesticide. Continuous wavelet transforms (CWT) and successive projections algorithm (SPA) were used for Raman spectral preprocess and characteristic Raman shifts selection, respectively. Multi-linear regression (MLR) was used for spectral modeling. It is shown that enhanced chips can achieve enhanced Raman spectral signal for low concentration of pesticides. CWT can improve spectral resolution and smoothness, and remove translation error. Characteristic Raman shifts selection method of SPA can improve analytical precision, and simplify modeling variables of MLR CWT-SPA-MLR model can improve correlation coefficient (r) of prediction from 0. 823 to 0. 903, and reduce root mean square error of prediction (RMSEP) from 1. 640 to 1. 122. CWT-SPA-MLR method can be used for constructing analytical models for Raman spectra and has good interpretability and repeatability.