Photosensitive organic-inorganic hybrid structures based on porous silicon

Abstract

In this study, the photovoltaic organic-inorganic structures were created by deposition of poly(3,4-ethylenedioxythiophene) film doped by poly(styrenesulfonate) and reduced graphene oxide on the porous silicon/silicon substrate. Formation of the hybrid structure was confirmed by means of atomic-force microscopy and Fourier transform infrared spectroscopy. The current-voltage characteristics of the obtained structures were studied. It was found the increase of electrical conductivity and photo-induced signal in organic-inorganic structures. Temporal parameters and spectral characteristics of photoresponse in the 400–1100?nm wavelength range were investigated. The widening of spectral photosensitivity in a short-wavelength range due to light absorption in various layers of the multijunction structure in comparison with single crystal silicon was revealed.     

Enantiomeric Cyclic Peptides with Different Caco‐2 Permeability Suggest Carrier‐Mediated Transport

Recently, oral absorption of cyclic hexapeptides was improved by N‐methylation of their backbone amides. However, the number and position of N‐methylations or of solvent exposed NHs did not correlate to intestinal permeability, measured in a Caco‐2 model. In this study, we investigate enantiomeric pairs of three polar and two lipophilic peptides to demonstrate the participation of carrier‐mediated transporters. As expected, all the enantiomeric peptides exhibited identical lipophilicity (logD_7.4) and passive transcellular permeability determined by the parallel artificial membrane permeability assay (PAMPA). However, the enantiomeric polar peptides exhibited different Caco‐2 permeability (P_app) in both directions a–b and b–a. The same trend was observed for one of the lipophilic peptide, whereas the second lipophilic enantiomer pair showed identical Caco‐2 permeability (within the errors). These findings provide the first evidence for the involvement of carrier‐mediated transport for peptides, especially for those of polar nature.     

Statistical Optimization of Flavonoid and Antioxidant Recovery from Macerated Chinese and Malaysian Lotus Root (Nelumbo nucifera) Using Response Surface Methodology

In this study, the combination of parameters required for optimal extraction of anti-oxidative components from the Chinese lotus (CLR) and Malaysian lotus (MLR) roots were carefully investigated. Box–Behnken design was employed to optimize the pH (X₁: 2–3), extraction time (X₂: 0.5–1.5 h) and solvent-to-sample ratio (X₃: 20–40 mL/g) to obtain a high flavonoid yield with high % DPPH_sc free radical scavenging and Ferric-reducing power assay (FRAP). The analysis of variance clearly showed the significant contribution of quadratic model for all responses. The optimal conditions for both Chinese lotus (CLR) and Malaysian lotus (MLR) roots were obtained as: CLR: X₁ = 2.5; X₂ = 0.5 h; X₃ = 40 mL/g; MLR: X₁ = 2.4; X₂ = 0.5 h; X₃ = 40 mL/g. These optimum conditions gave (a) Total flavonoid content (TFC) of 0.599 mg PCE/g sample and 0.549 mg PCE/g sample, respectively; (b) % DPPH_sc of 48.36% and 29.11%, respectively; (c) FRAP value of 2.07 mM FeSO₄ and 1.89 mM FeSO₄, respectively. A close agreement between predicted and experimental values was found. The result obtained succinctly revealed that the Chinese lotus exhibited higher antioxidant and total flavonoid content when compared with the Malaysia lotus root at optimum extraction condition.     

Development of an impedimetric sensor based on carbon dots and chitosan nanocomposite modified electrode for Cu(II) detection in water

Journal of Solid State Electrochemistry - The fast and sensitive detection of copper ions would be essential for water monitoring. Herein, we report a novel development of an impedimetric sensor...     

On the redox reactions between allyl radicals and NOx

NO_x mitigation is a central focus of combustion technologies with increasingly stringent emission regulations. NO_x can also enhance the autoignition of hydrocarbon fuels and can promote soot oxidation. The reaction between allyl radical (C₃H₅) and NO_x plays an important role in the oxidation kinetics of propene. In this work, we measured the absolute rate coefficients for the redox reaction between C₃H₅ and NO_x over the temperature range of 1000–1252 K and pressure range of 1.5–5.0 bar using a shock tube and UV laser absorption technique. We produced C₃H₅ by shock heating of C₃H₅I behind reflected shock waves. Using a Ti:Sapphire laser system with frequency quadrupling, we monitored the kinetics of C₃H₅ at 220 nm. Unlike low-temperature chemistry, the two target reactions, C₃H₅ + NO → products (R1) and C₃H₅ + NO₂ → products (R2), exhibited a strong positive temperature dependence for this radical-radical type reaction. However, these reactions did not show any pressure dependence over the pressure range of 1.5–5.0 bar, indicating that the measured rate coefficients are close to the high-pressure limit. The measured values of the rate coefficients resulted in the following Arrhenius expressions (in unit of cm³/molecule/s):$k_1\left({\mathrm{C}}_3{\mathrm{H}}_5+\text{NO}\right)=1.49\times {10}^{?10}\exp \left(?6083.6\frac{\mathrm{K}}{T}\right)\left(1017?1252K\right)$$k_2\left({\mathrm{C}}_3{\mathrm{H}}_5+\mathrm{N}{\mathrm{O}}_2\right)=1.71\times {10}^{?10}\exp \left(?3675.7\frac{\mathrm{K}}{T}\right)\left(1062?1250K\right)$To our knowledge, these are the first high-temperature measurements of allyl + NO_x reactions. The reported data will be highly useful in understanding the interaction of NO_x with resonantly stabilized radicals as well as the mutual sensitization effect of NO_x on hydrocarbon fuels.     

Mesoscopic Strain Fields Measurement During the Allotropic α − γ Transformation in High Purity Iron

The allotropic phase change from ferrite to austenite represents a moment of massive interplay between the microstructural and mechanical states of iron. The difference of compacity between the two phases induces a microplastic accommodation in the material at grain scale. However, mechanical heterogeneities resulting from the transformation process remain challenging to characterise due to the high temperature conditions it is associated with. We developed experimental equipment for in situ observation of α ? γ and γ ? α transformations. Images of the surface of an iron sample taken by an optical camera were used as input for a Digital Image Correlation (DIC) routine. Special care was taken to maximize image resolution to capture sub-grain phenomena. Observations show that, at the mesoscopic scale, shear strain fields exhibit strong localisations that are evidence of transformations that are occurring.

     

Plasma Crystal in (3 + 1) Dimensions

JETP Letters - A quasi-two-dimensional plasma crystal in (3 + 1) dimensions has been experimentally observed for the first time; i.e., three spatial coordinates of each microparticles of the...