Study on deactivation and regeneration of Pd/Al2O3 catalyst in hydrogen peroxide production by the anthraquinone process

Deactivated palladium catalysts in the hydrogenation of anthraquinione were regenerated with ethanol, nitric acid, hydrogen peroxide, boiling water and steam, respectively. The deactivated and regenerated catalysts were characterized by XPS, ICP, TG, FTIR, TPD, XRD, etc., and studied in the hydrogenation of anthraquinone. The results showed that the main cause of catalyst deactivation is the coverage of the active component by deposits. The treatments by hydrogen peroxide and boiling water can effectively regenerate the deactivated catalysts. This revised version was published online in August 2006 with corrections to the Cover Date.     

Electrocatalytic activity of sol-gel-prepared RuO2/Ti anode in chlorine and oxygen evolution reactions

Electrocatalytic properties of RuO₂/Ti anode with different coating masses, which are prepared by the alkoxide sol-gel procedure, are investigated in chlorine and oxygen evolution reactions by polarization measurements and electrochemical impedance spectroscopy in H₂SO₄ and NaCl electrolytes. According to polarization measurements, the activity of anodes at overpotentials below 100 mV is independent of coating mass. However, impedance measurements above 100 mV reveal changes in the activity of anodes in chlorine evolution reaction for different coating masses. The diffusion limitations related to the evolved chlorine are registered in low-frequency domain at 1.10 V (SCE), diminishing with the increase in potential to the 1.15 V (SCE). The observed impedance behavior is discussed with respect to the activity model for activated titanium anodes in chlorine evolution reaction involving formation of gas channels within porous coating structure. Gas channels enhance the mass transfer rate similarly to the forced convection, which also increases the activity of anode. This is more pronounced for the anode of greater coating mass due to its more compact surface structure. The more compact structure appears to be beneficial for gas channels formation. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 10, pp. 1173–1179. The text was submitted by the authors in English.     

BEPCⅡ直线加速器重大改造和束流调试进展

BEPCⅡ直线加速器的重大改造旨在获得高流强、小发射度和小能散的正负电子束, 以满足对撞机亮度提高两个两级的要求. 这对直线加速器各系统和束流物理是一个挑战. 文章介绍了直接决定束流性能的新电子源、新正电子源、新微波功率源、相位控制系统和束流测量系统等的改造情况; 叙述了束流物理研究; 介绍了束流调试进展情况和进一步改进计划.     

Farthest-point queries with geometric and combinatorial constraints

In this paper we discuss farthest-point problems in which a set or sequence S of n points in the plane is given in advance and can be preprocessed to answer various queries efficiently. First, we give a data structure that can be used to compute the point farthest from a query line segment in O(log²n) time. Our data structure needs O(nlogn) space and preprocessing time. To the best of our knowledge no solution to this problem has been suggested yet. Second, we show how to use this data structure to obtain an output-sensitive query-based algorithm for polygonal path simplification. Both results are based on a series of data structures for fundamental farthest-point queries that can be reduced to each other.     

Regioselective construction of polysubstituted benzene ring from Baylis-Hillman adduct via [4+2] annulation strategy

A new and regioselective [4+2] benzannulation protocol toward polysubstituted benzenes was developed. Nitroalkane derivative, which was prepared from Baylis-Hillman adduct, served as the four-carbon unit and Michael acceptor as a two-carbon unit.     

CONVERGENCE OF AN ITERATION METHOD WITHOUT DERIVATIVE

In this paper, we give a convergence theorem and error estimates for an iteration method under new Kantorovitch-Ostrowski type condition using the information of higher derivatives at initial points. Compared with the corresponding study in [3],the convergence determination is established under one global condition, instead of two , on the function.     

Synthesis of acetone oxime through acetone ammoximation over TS-1

The ammoximation of acetone to acetone oxime with 30 wt.% hydrogen peroxide over TS-1 has been studied. The conversion of acetone and the selectivity to acetone oxime can reach 99% and 94%, respectively. The by-products are the corresponding hydrazone, imine and small amounts of unidentified compounds. The influence of various parameters such as solvent, temperature, amounts of catalyst and the NH₃ to acetone molar ratio were investigated. This revised version was published online in August 2006 with corrections to the Cover Date.     

Ultrafast non-linear optical properties of Ge20As25Se55 chalcogenide films

The non-resonant third-order non-linear optical properties of amorphous Ge₂₀As₂₅Se₅₅ films were studied experimentally by the method of the femtosecond optical heterodyne detection of optical Kerr effect. The real and imaginary parts of complex third-order optical non-linearity could be effectively separated and their values and signs could be also determined, which were 6.6 × 10⁻¹² and −2.4 × 10⁻¹² esu, respectively. Amorphous Ge₂₀As₂₅Se₅₅ films showed a very fast response in the range of 200 fs under ultrafast excitation. The ultrafast response and large third-order non-linearity are attributed to the ultrafast distortion of the electron orbitals surrounding the average positions of the nucleus of Ge, As and Se atoms. The high third-order susceptibility and a fast response time of amorphous Ge₂₀As₂₅Se₅₅ films makes it a promising material for application in advanced techniques especially in optical switching.     

Asymmetric synthesis XXVII: Asymmetric catalytic trimethylsilylcyanation of aldehydes by novel Ti-chiral Schiff base complexes

Enantioselective catalytic trimethylsilylcyanations of aldehydes with 48% to 92% e.e. have been studied using the novel Ti-chiral Schiff base complexes. We have found that the catalyst led to high enantoselectivity when the molar ratio of the Schiff base 1 to Ti(O-i-Pr)₄ was 2:1.     

FTS-20E富里叶红外光谱仪数据系统改造

报道了ＦＴＳ－２０Ｆ富里叶红外光谱仪数据系统改造的工作采用ＩＢＭ４８６计算机及新的数据接口取代了陈旧的ＮＯＶＡ４数据系统，文章详细描述了其硬件设计和软件编辑，改造不仅更新了ＦＴＳ－２０Ｅ里叶红外光谱仪，而且还使其达到９０年代的水平。