ATR-FTIR study of Bacillus sp. and Escherichia coli settlements on the bare and Al2O3 coated ZnSe internal reflection element

FTIR-ATR has been used for understanding the interaction between bacteria and surfaces in the adsorption progress.     

Pre-Column Derivatization of Amines with 1,2-Benzo-3,4-Dihydrocarbazole-9-Isopropyl Chloroformate Followed by LC-Fluorescence and LC-APCI-MS

A pre-column derivatization method for the sensitive determination of amines using the labeling reagent 1,2-benzo-3,4-dihydrocarbazole-9-isopropyl chloroformate (BCIC-Cl) followed by high-performance liquid chromatography with fluorescence detection has been developed. Identification of derivatives is carried out by high performance liquid chromatography/atmospheric pressure chemical ionization (LC-APCI-MS-MS). The chromophore of 2-(9-carbazole)-ethyl chloroformate (CEOC) reagent is replaced by 1,2-benzo-3,4-dihydrocarbazole-9-isopropyl functional group, which results in a sensitive fluorescence derivatizing reagent BCIC-Cl. BCIC-Cl can easily and quickly label amines. Derivatives are stable enough to be efficiently analyzed by high-performance liquid chromatography and show an intense protonated molecular ion corresponding m/z [MH]⁺ under APCI in positive-ion mode. The collision-induced dissociation of protonated molecular ion formed a product at m/z 260 corresponding to the cleavage of CH₂-OCO bond. Studies on derivatization demonstrate excellent derivative yields over the pH 9.0–10.0. Maximal yields close to 100% are observed with a 3 to 4-fold molar reagent excess. In addition, the detection responses for BCIC derivatives are compared with those obtained using CEOC and FMOC as derivatization reagents. The ratios of I_BCIC/I_CEOC and I_BCIC/I_FMOC are, respectively, 1.23–3.14 and 1.25–3.08 for fluorescent (FL) responses (here, I is relative fluorescence intensity). Separation of the derivatized amines had been optimized on reversed-phase Eclipse XDB-C₈ column. Detection limits are calculated from 1.0 pmol injection, at a signal-to-noise ratio of 3, are 10.6–37.8 fmol. The mean interday accuracy ranges from 94 to 105% for fluorescence detection with the largest mean %CV<7.5. The mean interday precision for all standards is < 6.0% of the expected concentration. Excellent linear responses are observed with coefficients of > 0.9997. Revised: 12 December 2005 and 13 Febrauary 2006     

含二茂铁和吡啶单元的手性席夫碱配体在钌催化的不对称氢转移反应中的应用

Chiral Schiff base complexes are very efficient for a wide range of reactions, including expoxidation[1], epoxide ring opening[2], Diels-Alder reaction[3], aldol reaction[4], etc. However, there are only few examples of P-N chelate Schiff bases being used as the chiral ligands in the asymmetric transfer hydrogenation of ketones. Recently, Gao et al[5] reported a series of P,N,N,P Schiff base ligands that have relatively low enantioselectivity in the asymmetric transfer hydrogenation of ketones.     

毛细管电泳法测定白头翁汤中黄连和黄柏共煎生物碱的煎出量

 建立了利用毛细管电泳简便、准确地测定白头翁汤中黄连和黄柏共煎生物碱煎出量的方法。采用自组装毛细管电泳装置,采用75μmi.d.×50cm弹性石英毛细管,以0 05mol/LNa2B4O7 CH3OH(体积比为85∶15)溶液作缓冲液,运行电压为14kV,检测波长为232nm。另外,通过实验优化了提取溶剂中乙醇的含量。实验结果表明:以小檗碱、巴马汀提取量为指标,30%(体积分数)的乙醇水溶液是提取白头翁汤中黄连和黄柏共煎生物碱的最佳溶剂。小檗碱和巴马汀的质量浓度分别在15 0mg/L～65 0mg/L、12 5mg/L～50 0mg/L时与其峰面积有良好的线性关系;小檗碱的平均回收率不低于95%。     

毛细管区带电泳法快速测定复方布洛芬片的有效成分

研究了用毛细管区带电泳法快速测定复方布洛芬片中布洛芬和伪麻黄碱含量的方法。在０．０２５ｍｏｌ／Ｌ的磷酸盐缓冲液（ｐＨ８．１）中，上述两组分可在３ｍｉｎ内得以完全分离，用紫外检测器在２１０ｎｍ处检测，并以外标法定量。１１次测定含有９．５ｍｇ／Ｌ盐酸伪麻黄碱和６６．７ｍｇ／Ｌ布洛芬的试样溶液，相对标准偏差为２．９％（伪麻黄碱）和１．９％（布洛芬），回收率为１０３．１％（伪麻黄碱）和９７．６％（布洛芬）。应用毛细管区带电泳法测定复方布洛芬片剂的含量，所得结果与ＨＰＬＣ法一致。     

计算金属间化合物热力学性质的新方法

用一简单的相关函数式对金属间化合物的热力学性质进行拟合，提出了一种计算金属间化合物热力学性质的新方法，并用此方法计算了二元金属间化合物的常温热容和熵。计算结果表明，该方法简单，且能满足一定的计算精度，有一定的实用价值。     

Formation of Zn(1-x)MnxS nanowires within mesoporous silica of different pore sizes

Arrays of highly ordered Zn(1-x)MnxS quantum wires with x ranging from 0.01 to 0.3 and with lateral dimensions of 3, 6, and 9 nm were synthesized within mesoporous SiO2 host structures of the MCM-41 and SBA-15 type. The hexagonal symmetry of these arrays (space group p6m) and the high degree of order was confirmed by X-ray diffraction and transmission electron microscopy (TEM) studies. Physisorption measurements show the progressive filling of the pores of the SiO2 host structures, while TEM and Raman studies reveal the wire-like character of the incorporated Zn(1-x)MnxS nanostructures. X-ray absorption near-edge structure, extended X-ray absorption fine structure, photoluminescence excitation (PLE), and electron paramagnetic resonance studies confirm the good crystalline quality of the incorporated Zn(1-x)MnxS guest species and, in particular, that the Mn2+ ions are randomly distributed and are situated on tetrahedrally coordinated cation sites of the Zn(1-x)MnxS wires for all x up to 0.3. The amount of Mn2+ ions loosely bound to the surface of the Zn(1-x)MnxS nanowires is less than 4% of the total Mn content even for the 3 nm nanostructures up to the highest Mn content of x = 0.3. The effects of the reduction of the lateral dimensions on electronic properties of the diluted magnetic semiconductor were studied by PLE spectroscopy. Due to the quantum confinement of the excitons in the wires an increase of the direct band gap with decreasing particle size is observed.     

Rapid diffusion of CH4/H2 mixtures in single-walled carbon nanotubes

Equilibrium molecular dynamics (EMD) are used to examine the self-diffusion and macroscopic diffusion of CH4/H2 mixtures adsorbed inside a (10,10) single-walled carbon nanotube. EMD can be used to determine the macroscopic diffusion coefficients of adsorbed mixtures by evaluating the matrix of Onsager transport coefficients. Earlier studies have indicated the diffusion of light gases adsorbed as single components in carbon nanotubes is extremely rapid compared to that in other known nanoporous materials. The results presented here indicate that extremely rapid diffusion can also occur for mixtures of adsorbed molecules. The rapid diffusion of adsorbed molecules and the strong coupling between the fluxes of the adsorbed species in a mixture have interesting implications for uses of carbon nanotubes in membrane-based applications.     

Theoretical study of the local structure and Raman spectra of CaO-SiO2 binary melts

A procedure for the Raman spectra calculation of vitreous and molten silicates was presented in this paper. It includes molecular dynamics MD simulation for the generation of equilibrium configurations, Wilson's GF matrix method for the calculations of eigenfrequencies and corresponding vectors, electro-optical parameters method (EOPM) for the Raman intensity calculations, and the bond polarizability model (BPM) for the determination of polarizability and polarizability derivative. One of the most important characteristics of this procedure is the achievement of the partial Raman spectra of five tetrahedral units, as well as the total spectral envelope. In this paper, the calculation was carried out for the vitreous and molten calcium silicates with different compositions and at various temperatures. It is worthwhile to note that the calculation is based on statistical configurations distribution in the space and so it is not needed to artificially adjust the full width at half maximum (FWHM) of spectra. It was also tested through the good agreement of the calculated spectra with the experimental, including some regularity of spectral properties. According to the calculation, the symmetrical stretching of whole tetrahedral units, to which the stretching of Si-O(nb) bond gives the main contribution to intensity, is proven to be the dominance in the high-frequency range (800-1200 cm(-1)) and the symmetrical bending of Si-O(b)-Si, to which the stretching of Si-O(b) bond exhibits the main contribution, is the dominance in the medium-frequency range (400-700 cm(-1)). As the first theoretical results, the Raman scattering coefficient of each Q(i) was found little change along with the variation of composition and temperature.