聚全氟乙丙膜电子束引发预辐射接枝AA和SSS制备阳离子交换膜的研究

利用电子束引发预辐射接枝技术,在聚全氟乙丙烯(FEP)薄膜上接枝丙烯酸(AA)和对苯乙烯磺酸钠(SSS),制备一种含羧酸基团和磺酸基团的阳离子交换膜,详细研究了反应温度、单体总浓度、pH值变化、辐照气氛及添加剂对接枝率的影响规律,明确了实验条件与接枝率的对应关系。FTIR测试证明了接枝产物是全氟乙丙烯和丙烯酸、对苯乙烯磺酸钠的接枝共聚物。     

Electrochemical characterization of boron-doped polycrystalline diamond thin-film electrodes

The electrochemical characterization of boron-doped polycrystalline diamond thin-film (BDF) electrodes was studied using the anodic scan after concentrating lead in 0.1 mol/L KCl - 41 micromol/L Hg(NO(3))(2) and 0.1 mol/L KNO(3) - 0.01 mol/L HNO(3) - 41 micromol/L Hg(NO(3))(2); accumulation voltage was -0.90 V. The results obtained were compared with those given by glassy carbon (GC) electrodes and proved that the BDF electrodes offered high sensitivity, good precision and extreme stability over a 2-month period. These electrodes provided good resolving power for the determination of lead and cadmium and gave satisfactory results in the analysis of a pure water sample.     

多相催化反应原位红外系统及其应用

设计和建立了一套能耐高温的用于多相催化反应研究的原位红外系统，反应温度从室温到１１５０Ｋ，系统真空为１．０＊１０＾５－１．０－１０＾－４Ｐａ，红外光谱检测范围为４８００－２００ｃｍ＾－１。此系统扩展了原仪器的功能，提高了仪器利用率和效率。     

4D-QSAR analysis of a series of antifungal p450 inhibitors and 3D-pharmacophore comparisons as a function of alignment

A training set of 55 antifungal p450 analogue inhibitors was used to construct receptor-independent four-dimensional quantitative structure-activity relationship (RI 4D-QSAR) models. Ten different alignments were used to build the models, and one alignment yields a significantly better model than the other alignments. Two different methodologies were used to measure the similarity of the best 4D-QSAR models of each alignment. One method compares the residual of fit between pairs of models using the cross-correlation coefficient of their residuals of fit as a similarity measure. The other method compares the spatial distributions of the IPE types (3D-pharmacophores) of pairs of 4D-QSAR models from different alignments. Optimum models from several different alignments have nearly the same correlation coefficients, r(2), and cross-validation correlation coefficients, xv-r(2), yet the 3D-pharmacophores of these models are very different from one another. The highest 3D-pharmacophore similarity correlation coefficient between any pair of 4D-QSAR models from the 10 alignments considered is only 0.216. However, the best 4D-QSAR models of each alignment do contain some proximate common pharmacorphore sites. A test set of 10 compounds was used to validate the predictivity of the best 4D-QSAR models of each alignment. The "best" model from the 10 alignments has the highest predictivity. The inferred active sites mapped out by the 4D-QSAR models suggest that hydrogen bond interactions are not prevalent when this class of P450 analogue inhibitors binds to the receptor active site. This feature of the 4D-QSAR models is in agreement with the crystal structure results that indicate no ligand-receptor hydrogen bonds are formed.     

2020 Roadmap on two-dimensional nanomaterials for environmental catalysis

This roadmap demonstrates a series of two-dimensional nanomaterials, such as graphene, black phosphorus, oxides, layered double hydroxides, chalcogenides, bismuth-based layered compounds, MXenes, metal organic frameworks, covalent organic frameworks, and others, for environmental catalysis.     

Controlled kinetics of non-enzymatic chemiluminescence reactions for simple imaging of DNA and protein

A robust and sensitive non-enzymatic chemiluminescence (CL) imaging method is presented. In the method a fast-emitting CL reaction is tuned to furnish a slower-emitting reaction suitable for simple CL imaging. Typically, non-enzymatic CL reactions between luminol or fluorescein and oxygen species generated by KCN as catalyst, were rather fast and unsuitable for CL imaging; the speed of the reactions could, however, be reduced substantially by changing KCN for CH(3)CN or benzonitrile. Light emission from the tuned CL reaction was intense and long-lived, and even with a simple arrangement high sensitivity could be achieved. The maximum CL peak was reached after approximately 1.5 min in the presence of 25% acetonitrile, and as little as 16 fmol commercial isoluminol-labeled streptavidin was detected and visualized on either microplate or membrane. The approach was further illustrated by imaging of DNA on a membrane and of antibody on a microplate by use of biotin-streptavidin chemistry. Overall, this simple, economical, and sensitive CL imaging system is expected to be very useful in biochemical analysis, and greatly complements currently used enzyme-based CL imaging methods, especially in routine applications.     

Synthesis and properties of one-dimensional Ni(Ⅱ) and Ni(Ⅱ)Cu(Ⅱ) complexes linked by hydrogen bond

Four dithiooxalato (Dto) bridged one-dimensional Ni(ll) and Ni(ll)Cu(ll) complexes (Me6[14]dieneN4)Ni2(Dto)2) (1), (Me6[14]dieneN4)CuNi(Dto)2 (2), (Me6[14]aneN4)Ni2(Dto)2 (3), and (Me6[14]aneN4)CuNi(Dto)2(4), were synthesized. These complexes have been characterized by elemental analysis, IR, UV and ESR spectra. The crystal structure of complex 3 was determined. It crystallizes in the monoclinic system, space group C2/c with a = 2.2425(4) nm, b = 1.0088(2) nm, c=1.4665(3) nm, β= 125.32(3)° ;Z=4; R = 0.076, Rw = 0.079. In the complex, Ni(1) coordinates four sulphur atoms of two Dto ligands in plane square environment. Ni(2) lies in the center of mac-rocyclic ligand. For Dto ligand, two sulphur atoms coordinate Ni(1), and O(1) coordinates Ni(2) and forms weak coordination bond. O(2) is linked to N(2) of macrocyclic ligand through hydrogen bond.     

Crystal structure and strong antiferromagnetic interaction of a terephthalate-bridged binuclear copper(II) Complex, [{Cu(dipn)}2(μ-TPHA)](ClO4)2 (dipn = N-(3-aminopropyl)-1,3-propanediamine)

Three binuclear copper(II) complexes bridged by three different bridging ligands: μ-TPHA (terephthalato), μ-PHTA (phthalato) and μ-TCB (tetracarboxylatobenzene) have been synthesized. The crystal structure of [{Cu(dipn)}₂(μ-TPHA)](ClO₄)₂ where dipn = N-(3-aminopropyl)-1,3-propanediamine was solved at room temperature. The [{Cudipn}₂(μ-TPHA)](ClO₄)₂ complex consists of a μ-terephthalato bridging binuclear copper(II) cationic unit and two non-coordinated perchlorate anions. The TPHA ligand bridges in a bismonodentate fashion. The environment of the copper(II) ion is a distorted plane-square-planar coordination sphere. The magnetic properties of the three complexes have been investigated in the 75–300 K range, and show that the geometry of the Cu^II atom is the important factor for magnetic interactions in the terephthalato bridging binuclear copper(II) complexes. This revised version was published online in June 2006 with corrections to the Cover Date.     

Morphology and degradation of biodegradable poly(L-lactide-co-β-malic acid)

Poly(L -lactide-co-β-malic acid) was obtained after the hydrogenolysis of the copolymer of L -lactide (L-LA) and β-benzyl malate (MA). ¹H-NMR demonstrated that the composition of the copolymer was identical to the feeding dose. Thermal property study revealed the morphology of the copolymer could be changed from semi-crystalline to amorphous with increasing hydrophilic β-malic acid content. The copolymers with 8 and 13 mol% β-malic acid content possessed enough mechanical property for fabricating cell scaffold. Degradation result demonstrated that most of the hydrophilic β-malic acid units broke down from the copolymer within 1 week and the ester bond between L -lactide and β-malic acid hydrolyzed prior to the inner ester bond of poly(L -lactide) (PLLA). Copyright © 2003 John Wiley & Sons, Ltd.