矿产品水分含量代表值Bootstrap模拟取样估计

在对矿产品水分含量基础统计学特征描述的基础上,采用内核密度估计对水分含量数据多态性进行了分析,根据双态分布的特点,使用Bootstrap模拟取样方法对试验样本值模拟重复取样,以多次Bootstrap模拟取样的均值与标准偏差作为矿产品水分含量有限样本代表值及标准偏差的稳健估计,实践证明Bootstrap模拟取样估计对矿产品水分含量代表值的估计是有效的,该项研究为矿产品水分含量代表值的准确评估提供了一种新方法.     

Hydroxylation of nigranoic acid to 6β-hydroxynigranoic acid by Caryospora carllicarpa YMF1.01026

Microbial transformation of nigranoic acid by Caryospora carllicarpa YMF1.01026 afforded the new derivative 6β-hydro-xynigranoic acid. Its structure was elucidated by spectroscopic methods.     

TiO(2) porous electrodes with hierarchical branched inner channels for charge transport in viscous electrolytes.

Titanium dioxide (TiO(2)) photoelectrodes with micro/nano hierarchical branched inner channels have been prepared by an electrohydrodynamic (EHD) technique and assembled to form dye-sensitized solar cells (DSSCs). Excellent penetration of ionic-liquid electrolytes and enhanced light harvesting in the longer wavelength region are realized within the composite-structure electrode, thus a better fill factor (ff) of 75.3 % and higher conversion efficiency (eta) of 7.1 % are obtained for viscous ionic-liquid electrolytes compared to pure nanostructured films. Hierarchical branched channels in the photoanodes can efficiently improve the transport properties of redox-active species in viscous electrolytes, which is demonstrated by electrical impedance spectroscopy (EIS). The incident monochromatic photon-to-electron conversion efficiency (IPCE) shows that enhanced light scattering in the composite film is of benefit for light harvesting and thus for solar energy conversion efficiency.     

对固体圆二色光谱测试方法的再认识——兼谈“浓度效应”

对近期发展的固体圆二色(CD)光谱测试方法进行了概述、评价和比较, 着重探讨了“浓度效应”的存在使固体CD光谱失真的原因. 通过对本课题组和其他作者已报道的四种化合物的固体CD谱再测试的反思, 强调了依手性化合物的手性光谱学性质不同, 根据浓度梯度实验选择其合适测试浓度的必要性. 对固有手性的阻转异构化合物(S)-1,1'-联二萘酚(S-BINOL)进行了成膜法固体CD谱浓度梯度测试, 发现所得固体薄膜CD谱中也存在着“浓度效应”     

温敏性聚合物复合体系低临界溶解温度的研究

研究了温敏性N-异丙基丙烯酰胺的均聚物(PNIPAm)及其共聚物P(NIPAm-co-KYD)与十六烷基三甲基氯化铵(CTAC)、乙二胺四乙酸(EDTA)、盐等复配体系的低临界溶解温度(LCST)的变化规律。单因素复配体系中,wEDTA为0.1%时,体系LCST从33℃降低到25℃,增大到0.2%时,LCST下降趋于缓慢;wCTAC在0.5%-3.0%范围内,LCST先上升后下降,但wCTAC在0.5%-1.0%内相转变很不明显,超过1.5%后相转变又趋于明显;而无机盐能使体系LCST线性下降;多因素复配体系中LCST变化较缓和,易于控制且相转变现象明显。     

Single Atom Alloy Preparation and Applications in Heterogeneous Catalysis

There have been remarkable progresses in manipulating heterogeneous catalysts' nanostructures in the past decade. The concept of single atom alloy (SAA) was firstly proposed in 2012 when researchers successfully stabilized single Pd atoms on the Cu(111) surface. However, earlier work in 2009, which focused on replacing one Au atom with a Pd atom in thiolate protected Au₂₅ nanoclusters, could also be considered as the pioneer work of single atom alloy. Both kinds of single atom alloys exhibited the potential of maximum utilization of scarce elements and attractive catalytic performances. The well‐defined structures of SAA catalysts make accurate modeling possible, which further realizes the rational design of single atom alloy catalysts. In this review, we summarize the research trajectory of single atom alloys as well as recent achievements in this field. We also introduce several commonly adopted characterization methods for SAA catalysts such as scanning tunneling microscopy (STM), temperature programmed reaction (TPR), extended X‐ray absorption fine structure (EXAFS) spectra, matrix assisted laser desorption/ionization mass spectrum (MALDI‐MS) and differential pulse voltammetry (DPV). Through discussing recent progresses in SAA catalysts, we propose that future researches in this filed should be focused on exploring new kinds of metal nanocrystals and controlling the nanostructure of SAA even more precisely.     

牛血清白蛋白与十二烷基硫酸钠作用的机理

利用电动势法得到了牛血清白蛋白(BSA)与十二烷基硫酸钠(SDS)相互作用的结合等温线. 通过四阶导数紫外光谱法和荧光光谱法研究了相互作用过程中芳香族氨基酸残基微环境极性的变化. 通过研究发现, 随着SDS浓度的逐渐增大, SDS在BSA上的平均结合数(v)逐渐增大, 色氨酸(Trp)残基所处微环境的极性在减弱后保持基本不变, 酪氨酸残基所处微环境的极性在明显增强后稍有减弱, 苯丙氨酸残基所处微环境的极性略有增强. 结果表明, 当v由0增大到14时, SDS主要结合在BSA的Trp-213附近并逐渐形成聚集体, 从而诱导BSA由结构域ⅡA 开始逐渐展开. 此后, SDS呈正协同作用的特点与BSA 结合, v急剧增大. 当v约为302 时, SDS在BSA上的结合基本达到饱和, BSA的构象趋于稳定.     

Comparative X-ray photoelectron spectroscopic study on the desulfurization of thiophene by Raney nickel and rapidly quenched skeletal nickel

The desulfurization of thiophene on Raney Ni and rapidly quenched skeletal Ni (RQ Ni) has been studied in ultrahigh vacuum (UHV) by X-ray photoelectron spectroscopy (XPS). The Raney Ni or RQ Ni can be approximated as a hydrogen-preadsorbed polycrystalline Ni-alumina composite. It is found that thiophene molecularly adsorbs on Raney Ni or RQ Ni at 103 K. At 173 K, thiophene on alumina is desorbed, while thiophene in direct contact with the metallic Ni in Raney Ni undergoes C-S bond scission, leading to carbonaceous species most probably in the metallocycle-like configuration and atomic sulfur. On RQ Ni, the temperature for thiophene dissociation is about 100 K higher than that on Raney Ni. The lower reactivity of RQ Ni toward thiophene is tentatively attributed to lattice expansion of Ni crystallites in RQ Ni due to rapid quenching. The existence of alumina and hydrogen may block the further cracking of the metallocycle-like species on Raney Ni and RQ Ni at higher temperatures, which has been the dominant reaction pathway on Ni single crystals. By 473 K, the C 1s peak has disappeared, leaving nickel sulfide on the surface.     

1，3，5－取代吡唑－4－亚甲基环丙烷羧酸酯的合成及生物活性

１，３，５－取代吡唑－４－亚甲基环丙烷羧酸酯的合成及生物活性黄润秋，宋健，冯磊（南开大学元素有机化学研究所，元素有机化学国家重点实验室，天津，３０００７１）关键词吡唑，环丙烷羧酸酯，杀虫剂，杀病毒剂吡唑类杂环化合物有广泛的生物活性，并有若干高效的杀虫...     

Improved hygrothermal durability of flax/polypropylene composites after chemical treatments through a hybrid approach

There are growing research interests in flax fibers due to their renewable ‘green’ origin and high strength. However, these natural fibers easily absorb moisture and have poor adhesion with polymer matrix leading to low interfacial strength for the composites. A hybrid chemical treatment technique combining alkali (sodium hydroxide) and silane treatments is adopted in the current study to modify flax fibers for improved performances of flax/polypropylene composites. Changes in chemical composition, microstructure, wettability, surface morphology, crystallinity and tensile properties of single flax fiber before and after chemical treatments were comprehensively characterized using techniques including SEM, FTIR, AFM, XRD, micro-fiber tester, etc. It was found that hemicellulose and lignin at the fiber surface were removed due to alkali treatment, which helped to reduce moisture absorption of the composites. Alkali-treated flax fibers were later subjected to silane treatment, which helped to improve the compatibility between flax fiber and polypropylene matrix. After alkali-silane hybrid chemical treatment, moisture absorption of the composites was further decreased. At the same time, the interfacial bonding strength between flax and polypropylene is significantly enhanced. All these results validate the great advantage of the hybrid chemical treatment approach for flax/polypropylene composites, which has the potential to promote the application of chemical treatment techniques in the plant fiber composite industry.

Graphic abstract