茶叶中7种有机磷农药残留量的同时测定

采用配有FPD检测器的气相色谱仪测定茶叶中多种有机磷的农药残留量. 对样品的前处理进行了探讨, 结果表明, 样品用乙酸乙酯和少量苯提取, 过硅胶-活性炭柱净化, 同时用乙酸乙酯和少量苯洗脱, 7种有机磷在HP-35柱上得到很好的分离, 且方法准确快速、重现性、回收率好, 符合实际工作需要.     

N-烷基化手性氨基醇配体的合成

本实验制备了不同构型的两种N-单烷基和N-双烷基的新的手性氨醇配体。     

LiCoO2中锂离子固相扩散系数随循环次数的变化

The solid diffusion coefficient of lithium-ion in LiCoO₂ cathode material has been investigated by the capacity intermittent titration technique (CITT) at different voltages and at different charge/discharge cycles. By SEM, XRD and FTIR techniques, the structure of LiCoO₂ was studied before and after charge-discharge cycles, and the relationship between solid diffusion coefficient and crystal structure was further discussed. CITT results show that the value of Li⁺ solid diffusion coefficient of LiCoO₂ is about 10^-12 cm²·s^-1. During the whole charge-discharge cycles, the Li⁺ solid diffusion coefficient decreased within the voltage of 4.0～4.3 V, which is attributed to the change of the structure of LiCoO₂.     

纳米氧化铜的制备及常温脱硫效能研究

采用硝酸铜为原料、氢氧化钠溶液为沉淀剂、使用体积比为1∶1的乙醇-水溶液为分散剂的直接沉淀法制备，通过改变工艺条件得到了三种纳米氧化铜产品，平均粒径分别为25.63，10.74和7.57 nm。采用TG-DTA、FIR、XRD和TEM等对纳米氧化铜进行表征。对产品的常温脱硫活性进行了穿透试验，并与已开发的其他常温精脱硫产品进行了比较，结果表明纳米氧化铜应用于H₂S脱硫，可在常温条件下具有优异的脱硫活性，对H₂S的脱除精度可以达到0.05 mg·m^-3以下。经过优选，产品在3 000 h^-1空速下穿透硫容达到25.3%，高于同类型的其他脱硫剂产品。     

WS2 超细粉体的固相法合成

WS2 超细粉体的固相法合成;WS2;固相反应;过硫系数;高能球磨;粒度     

Crystal and Molecular Structures of Two Derivatives of 1, 3a, 5-Trisubstituted-3a ,4,5,11-Tetrahydro-1,2,4-Oxadiazolino[5,4-d] [1, 5]Benzothiazepine

The structures of two derivatives of the title compound [C24H22N2OS, Mr = 386. 5 for (1); C25H22N2O3S, Mr = 430. 5 for (2)] were determined by using X-ray single-crystal strcuture analysis method. The final discrepancies are R = 0. 071 and 0. 077, respectively, for the reflections measured on a four-circle diffractometer. The space group for compound (1) is P bca with a=1. 6639(4), b=2.0286(3), c= 1.1742(1) nm, V = 3. 964(1) nm3, F(000) = 1632 e, Z=8; and (2) belongs to P21/n space group, and the cell dimensions are a=1. 1115(4), b=0. 8932(7), c=2. 186(3) nm, β=97. 52 (1)°? V=2.151(4) nm3, F(000) = 904 e, Z=4.The molecular backbones are very similar, each is a tricyclic system. The central seven-membered ring is in a twisted-boat conformation, and is cis-fused to 1,2,4-oxa-diazolino ring, while the latter moiety is in an envelope form. There are conjugated but non-coplanar effects in each structure. All bond lengths and angles in the molecules are normally acceptable. The crystal structure on the whol     

新型聚丙烯酸酯类柴油降凝剂分子模型的建立及验证

在前期工作得出的正构烷烃含量与浊点、冷滤点、凝点的定量关系模型基础上，选择柴油降凝剂的基团对柴油降凝剂分子结构进行了设计，得出了设计模型。结果表明，将含氮基团引入柴油降凝剂可以显著提高柴油降凝剂的性能。根据设计模型合成了一系列聚丙烯酸单酯和混合酯柴油降凝剂，并通过对柴油降凝剂的性能测试结果和自行设计的计算程序对设计模型进行了验证，结果表明，从柴油正构烷烃含量对柴油降凝剂的配比进行设计是可行的。     

热定型聚酯纤维内应力与晶格变形的关系

<正> 结晶学家认为低分子物结晶虽可能存在一定缺陷和变形,但一般都具有一定的晶胞参数。这一概念对于高分子物结晶已不再正确。Bosley认为成形、热处理、冷却速率和杂质的存在皆可引起晶格变形;Fakirov故意在PET中加入少量杂质,却未引起变形。至今,PET已累积了7组晶胞参数,8个计算所得的晶区密度显示了较大幅度的波动(见