Berry phase and shot noise for spin-polarized and entangled electrons

Shot noise for entangled and spin-polarized states in a four-probe geometric setup has been studied by adding two rotating magnetic fields in an incoming channel. Our results show that the noise power oscillates as the magnetic fields vary. The singlet, entangled triplet and polarized states can be distinguished by adjusting the magnetic fields. The Berry phase can be derived by measuring the shot noise power.     

基于Hilbert变换的相空间重建方法在HLS逐束团测量系统中的应用

引入基于Hilbert变换的相空间重建手段, 对合肥光源(HLS)逐束团测量系统采集的数据进行了全面的分析, 其中包括单个束流位置监测器(BPM)数据的相空间重建, 逐圈逐束团振荡相位信息、束团振荡模式信息、逐束团横向工作点(tune值)变换. 提出了新的分析束团tune值的手段, 提供传统方法无可比拟的更高的时间和频率分辨率. 还对不同模式的阻尼率进行了计算, 这为衡量逐束团反馈系统的效果提供了确实可靠的方法.     

CsI(Tl)晶体探测器APD读出的温度效应

对中国科学院近代物理研究所自行生长的铊激活碘化铯闪烁晶体CsI(Tl)光输出及Hamamtsu公司生产的S8664-1010型雪崩光二极管(APD)增益对温度的依赖关系做了系统研究. 结果表明, CsI(Tl)晶体光产额在室温范围内随着温度的增加而增加, 在－2℃—8℃温度范围内的平均温度系数为0.67%/℃, 在8℃—25℃温度范围内的平均温度系数为0.33%/℃. 而对所使用的APD, 其增益在室温范围内的温度系数为－3.68%℃(工作电压400V). APD结合CsI(Tl)晶体在室温下对¹³⁷Cs的662keV γ射线的能量分辨可达5.1%.     

(E)-3-[N-(α-苯乙胺)]-2-烯基-1-苯丙酮的合成及其研究

烯胺是一类重要的反应中间体,其在有机合成中有着广泛的应用.采用碳-氮转移法合成了结构稳定、不易转变为亚胺的手性烯胺化合物(E)-3-[N-(α-苯乙胺)]-2烯基-1-苯丙酮,并对产物进行了红外光谱及核磁共振氢分析,结果令人满意.     

NPB/Alq3有机量子阱光电特性研究

利用热蒸发的方法制备了有机量子阱发光器件和Alq3单层发光器件,其中NPB(N,N′-Di-[(lnaphthalenyl)-N,N′-diphenyl]-(1,1′-biphenyl)-4,4′-diamine)作垒层,Alq3(Tris-(8-quinolinolato) aluminum)作阱层,量子阱结构类似于无机半导体的Ⅱ型量子阱结构.实验发现有机量子阱发光器件结构中存在垒层向阱层的F(o)rster无辐射共振能量转移,具有良好的电流-电压特性,光谱的窄化及蓝移,并且光谱的蓝移程度随电压的增大而逐渐增强.     

Resonant Response of Rectangular/kFM Cantilever in Liquid

Dynamic characteristics of atomic force microscopy （AFM） cantilevers can be influenced by their working media. We perform an experimental study on the resonant responses of rectangular AFM cantilevers with different sizes immersed in various viscous fluids. The measured resonance frequencies in liquids are used to valldate several theoretical models. Comparison shows the analytical model proposed by Sader [J. Appl. Phys. 84 （1998） 64] can give the best agreement with the experimental results with the maximum relative error nearly 16% for all the cantilevers in different liquids. The ratio between the resonant frequencies in air and water is almost independent of the cantilever length, which is consistent with the theoretical analyses.     

An Experimental Study of Mg Aggregation in AA5754 Alloys by Positron Annihilation Spectroscopy

Defects in an AA5754 （Al-3.0%Mg） alloy are investigated by coincidence Doppler broadening spectroscopy and positron lifetime spectroscopy. The results indicate enhancement of positron trapping by Mg atoms in this Al-Mg alloy after quenching treatment at 623K, which may be due to the formation of vacancy-Mg complexes or the aggregation of Mg near the vacancy sites. It is speculated that the aggregation of Mg atoms in the moderate temperature range is responsible for cracking in spot welding of AA5754 alloys.     

All-Optical RZ-to-NRZ Format Conversion with a Tunable Fibre Based Delay Interferometer

All-optical format conversion from return-to-zero （RZ） to non-return-to-zero （NRZ） is demonstrated with temperaturecontrolled all-fibre delay interferometer （DI） at 20 Gb/s. The operation principle is theoretical analysed with the help of numerical simulation and spectra analysis. Theoretical analysis results are consistent well with the experimental results. The format conversion can be achieved with power penalty of 0.54 dB and with output extinction ratio 20 dB.     

Effects of Inhomogeneous Spin Coupling and Anisotropy on Thermal Entanglement

We study the thermal entanglement properties of a simple system that includes three spins inhomogeneously coupled between them with additional anisotropy in their couplings. The main result is the systematic analysis of the concurrence evolution as functions of inhomogeneity, anisotropy and temperature. By adjusting proportional factor of the interaction J and anisotropy parameter △, the comparison between concurrences C₁₂ andC₁₃ is also presented.     

Thermal Performance of Laser Diode Array under Constant Convective Heat Transfer Boundary Condition

Three-dimensional heat transfer model of laser diode array under constant convective heat transfer coefficient boundary condition is established and analytical temperature profiles within its heat sink are obtained by separation of variables. The influences on thermal resistance and maximum temperature variation among emitters from heat sink structure parameters and convective heat transfer coefficient are brought forward. The derived formula enables the thermal optimization of laser diode array.