HPLC法测定豆制品中游离异黄酮的含量

利用高效液相色谱法（HPLC）对豆制品中的大豆黄素和染料木素的含量进行测定，从而研究豆制品加工中的游离大豆异黄酮分布情况。     

Patterned langmuir-blodgett films of monodisperse nanoparticles of iron oxide using soft lithography

Langmuir-Blodgett (LB) films of monodisperse iron oxide nanoparticles have been successfully deposited onto patterned poly(dimethylsiloxane) surfaces. These patterned LB films of iron oxide nanoparticles were transferred onto solid substrates using micro contact printing.     

A Novel Synthesis of Two-dimensional Nanopatterned TiO2 Thin Film

Recently the research on structures with an ordered two-dimensional(2D) pattern has attracted great attention due to its versatile applications in the fields of microelectronic and optoelectronic devices, displays, biochips and sensors, enzymatic immobilization, drug carriers, and photonic band gap materials. Various well-arrayed 2D structures have been made by the modern technique such as laser writing pattern fabrication, photoetching technique, micro-electromechanical systems based on scann…     

Ce1-XMnXO2-a复合氧化物催化剂甲烷催化燃烧性能的研究

采用水热法合成了系列Ce_1-XMn_XO_2-a-T(X=0.0，0.1，0.2，0.3，0.5，0.7，0.9，1.0；T表示焙烧温度)，T=500，650，800 ℃)复合氧化物催化剂用于甲烷的催化燃烧。通过XRD、N₂吸/脱附、TG-DSC、UV-Vis-DRS和TPR表征手段研究了不同组成催化剂的物理化学性质及其对甲烷催化燃烧活性。结果表明，在500 ℃焙烧的情况下Mn进入CeO₂晶格形成均相固溶体催化剂的最大取代值为0.7，而当Mn继续增加时则出现Mn₂O₃晶相偏析，同时各催化剂具有较高的比表面积；随着焙烧温度的升高，进入CeO₂晶格的Mn最大取代值逐渐减少，650和800 ℃时分别为0.5和0.3，且比表面积相应降低。Ce_1-XMn_XO_2-a-800催化剂的还原行为大致呈现三阶段，即为Mn₂O₃ → Mn₃O₄的还原(340～420 ℃)，Mn₃O₄ → MnO的还原(420～480 ℃)和体相氧化铈的还原(700～900 ℃)，且Mn的引入整体上提高了催化剂的可还原能力。甲烷催化燃烧活性评价结果表明，比表面积并非影响催化剂活性的主要因素，影响催化剂甲烷催化活性的主要因素为催化剂的组成、可还原能力和焙烧温度；而其中以Ce_0.3Mn_0.7O_2-a-800催化剂表现出较高的甲烷催化燃烧活性，在甲烷转化率为10%和90%时的温度分别为430 和613 ℃。进一步考察Ce_0.3Mn_0.7O_2-a在不同温度(500、650、800和1 000 ℃)焙烧后的催化活性表明，随着焙烧温度的提高催化剂催化活性降低。     

常压升温下油煤浆表观黏度变化的研究

为探讨煤直接液化工艺中油煤浆表观黏度随温度升高的变化规律，利用高温黏度计测定了煤浆体系的黏度，考察了溶剂、煤浆浓度、煤中含水量和不同显微组分等因素以及剪切速率、配浆温度、溶胀作用等对煤浆黏度 温度特性的影响。研究结果表明，低温下影响煤浆黏度变化的主要因素是溶剂本身的性质，煤浆的表观黏度随温度升高而降低；随温度继续升高在较宽温度范围内黏度变化不大，这是由溶剂性质以及煤在溶剂中的溶胀行为共同作用的结果；当温度达到约220℃后继续升高温度溶胀作用逐渐占优势，从而导致煤浆体系的表观黏度逐渐增大。     

水相法合成二氯二甲茂钛与水杨酸类配合物

Ｃｐ2 ＴｉＣｌ2 具有很好的抗癌活性 ,已成为第三代抗癌药物[1 - 3] 。为了寻求活性更高的抗癌药物 ,探索抗癌机理 ,我们用 (ＭｅＣｐ) 2 ＴｉＣｌ2 、水杨酸或其衍生物 ,按水相法合成了甲茂钛的水杨酸类配合物。合成路线如下图所示 :其中 :Ⅰ为ｐＨ <4 ,Ｘ =Ｈ ,Ｙ =Ｈ的产物 ;Ⅱ为ｐＨ <4 ,Ｘ =Ｈ ,Ｙ =ＮＯ2 的产物 ;Ⅲ为ｐＨ >6 ,Ｘ =ＮＯ2 ,Ｙ =ＮＯ2 ,Ｚ =Ｏ的产物 ;Ⅳ为ｐＨ >6 ,Ｘ =Ｈ ,Ｙ =Ｈ ,Ｚ =Ｓ的产物。 (Ⅰ～Ⅳ为新化合物 )1　实验部分1 .1　仪器与试剂水杨酸、ＴｉＣｌ4,ＡＲ ;5 -硝基水杨酸、3,5 -二硝基水杨酸、5 -磺基…     

Natural anti-HIV agents. Part 3: Litseaverticillols A-H, novel sesquiterpenes from Litsea verticillata

Bioassay directed-fractionation led to the identification of litseaverticillols A-H (1-8) from the leaves and twigs of Litsea verticillata Hance. These new sesquiterpenes possess a unique skeleton that was recently designated as ‘litseane’. The structures of these compounds were determined by spectroscopic means including 1D and 2D NMR data. Structural configurations were determined by ROESY experiments. Mosher ester reactions and optical rotation measurements established the sesquiterpenes 1-8 as racemates. Isolates 1-8 inhibited HIV-1 replication in HOG.R5 cells with IC₅₀ values ranging from 2 to 15 μg/ml (8-58 μM) while affecting the growth of HOG.R5 at concentrations 2-3-fold higher. Based on this data, structure-activity relationships can be discerned, suggesting compounds of this class are good candidates for analog production.     

CARRIER PHOTOGENERATION IN POLY（N-VINYL-CARBAZOLE）-BASED PHOTOCONDUCTIVE THIN-FILM DEVICES

In this paper, photoexcitation processes in the bilayer devices based on inorganic materials and poly（N-vinylcarbazole） （PVK） were investigated. In order to clarify the roles of inorganic materials in photoconductive properties of bilayer devices, TiO2 and ZnS were chosen to combine with PVK. A model for generation of photocurrent （Iph） in single layer device of PVK was obtained. It is deduced that the recombination rate constant （Pcomb） and the ionization rate constant （y） ofexcitons should be considered as the most important factors for Iph. For inorganic materials （TiO2 or ZnS）/PVK bilayer devices, in reverse bias of-4 V, the photocurrent of 115 mA/cm^2 in the TiO2/PVK device was observed, but the photocurrent in the ZnS/PVK device was only 10 mA/cma under the illumination light of 340 nm and the light intensity of 14.2 mW/cm^2. The weaker photocurrent is attributed to the absorption of ZnS within UV region and the energy offset at the interface between PVK and ZnS, which impedes the transport of charge carriers.     

Syntheses and structures of magnesium pyridine thiolates--model compounds for magnesium binding in photosystem I

Novel magnesium pyridine-2-thiolates were prepared by using alkane elimination chemistry. The resulting complexes display a metal coordination environment composed of sulfur/nitrogen bonding from the intramolecularly stabilized mercaptopyridine ligand, in addition to coordination by the oxygen centers from two THF donors. The compounds are well-suited model compounds for the magnesium centers in Photosystem I, in which magnesium, situated in the central chlorophyll ligand, is bound to sulfur from a nearby methionine residue. All compounds were characterized by (1)H, (13)C NMR, and IR spectroscopy, in addition to Xray crystallography.     

Two New Pyrrolizidines from Ligularia lankongensis

Two new pyrrolizidines named lankongensisine A (1), B (2) were isolated from the roots of Ligularia lankongensis collected in Lijiang, Yunnan, and their structures were established by spectroscopic analysis.