Micro- and nanopatterned copper structures using directed self-assembly on templates fabricated from phase-separated mixed Langmuir-Blodgett films

We report a versatile method to confine metal thin films in micro- and nanopatterns using directed self-assembly on the templates fabricated from phase-separated mixed Langmuir-Blodgett (LB) films. The pattern of the mixed LB films can be tuned by adjusting intermolecular interaction between the film-forming molecules in the LB films and by varying the fabrication conditions of the films such as the mixing ratio, subphase temperature, and surface pressure. We use the patterned LB films for templates to confine metal in patterned regions, taking advantage of the difference between the surface free energy of the patterned regions and that of the self-assembled monolayer of the silane coupling agent. Au nanoparticles are confined onto the patterned films as a catalyst for the succeeding Cu electroless deposition. The atomic force microscopic images, Auger electron spectra, and scanning Auger electron maps of a Cu-deposited film show that Cu is selectively deposited on the patterns of phase separation of the original mixed LB films.     

Surface-enhanced Raman scattering and micro-Raman imaging of Langmuir-Blodgett films of rhodium phthalocyanine

Rhodium phthalocyanine (RhPc) was synthesized and ultra thin Langmuir-Blodgett (LB) films of RhPc were successfully fabricated. The LB film characterization was carried out using both UV-vis absorption spectra and Raman scattering. The Raman spectroscopy was carried out using 633 and 780 nm laser lines. LB films were deposited onto Ag nanoparticles to achieve the surface-enhanced pre-resonance Raman scattering (pre-SERRS) and surface-enhanced Raman scattering (SERS) for both laser lines, respectively, which allowed the characterization of the RhPc ultra thin films. The morphology of the LB RhPc neat film is extracted from micro-Raman imaging.     

Langmuir monolayers of Co nanoparticles and their patterning by microcontact printing

In this paper, we describe an easy and reliable method for the production of patterned monolayers of Co nanoparticles. A two-dimensional monolayer of Co nanoparticles is fabricated by spreading a nanoparticle solution over an air-water interface and then transferring it to a hydrophobic substrate by using the Langmuir-Blodgett (LB) method. Transmission electron microscopy (TEM) was used to show that, with increasing surface pressure, the Co nanoparticles become well-organized into a Langmuir monolayer with a hexagonal close-packed structure. By controlling the pH of the subphase, it was found that a monolayer of Co nanoparticles with long-range order could be obtained. Further, by transferring the Langmuir monolayer onto a poly(dimethoxysilane) (PDMS) mold, the selective micropatterning of the Co nanoparticles could be achieved on a patterned electronic circuit. The electronic transport properties of the Co nanoparticles showed the ohmic I-V curve.     

The Role of Oxidative Debris on Graphene Oxide Films

We study the effect of oxidative impurities on the properties of graphene oxide and on the graphene oxide Langmuir–Blodgett films (LB). The starting material was grupo Antolín nanofibers (GANF) and the oxidation process was a modified Hummers method to obtain highly oxidized graphene oxide. The purification procedure reported in this work eliminated oxidative impurities decreasing the thickness of the nanoplatelets. The purified material thus obtained presents an oxidation degree similar to that achieved by chemical reduction of the graphite oxide. The purified and non‐purified graphene oxides were deposited onto silicon by means of a Langmuir–Blodgett (LB) methodology. The morphology of the LB films was analyzed by field emission scanning microscopy (FE‐SEM) and micro‐Raman spectroscopy. Our results show that the LB films built by transferring Langmuir monolayers at the liquid‐expanded state of the purified material are constituted by close‐packed and non‐overlapped nanoplatelets. The isotherms of the Langmuir monolayer precursor of the LB films were interpreted according to the Volmer’s model.     

Surfactant-resisted assembly of Fe-containing nanoparticles for site-specific growth of SWNTs on Si surface

This paper describes a facile approach to the site-specific growth of single-walled carbon nanotubes (SWNTs) on silicon surfaces by chemical vapor deposition (CVD). The approach is based on the use of a surfactant as a resist to define patterns of silicon oxide nanodomains onto which nanoparticles of iron hydroxide (Fe(OH)3), 1-5 nm diameter, could be deposited. In base growth mode, the SWNTs can grow from the oxide nanodomains. By controlling the location of oxide nanodomains, site-specific growth could be obtained. The iron hydroxide nanoparticles were prepared by hydrolysis of ferric chloride (FeCl3). Patterned hydroxylated silicon oxide nanodomains were created by scanning probe oxidation (SPO) of silicon substrates modified with aminopropyltrimethoxysilane (APTMS, H2N(CH2)3Si(OCH3)3). Due to electrostatic interaction, Fe(OH)3 nanoparticles can be selectively deposited on hydroxyl groups present on silicon oxide nanodomains. To inhibit the assembly of the nanoparticles on a APTMS-coated silicon surface, sodium dodecyl sulfate (SDS) was introduced, which restricted deposition to the hydroxylated nanodomains. A model mechanism for the selective deposition mechanism has been proposed. It was possible to convert the patterned Fe(OH)3 nanoparticles to iron oxide, which served as a catalyst for the site-specific growth of SWNTs. Raman spectroscopy and AFM were used to characterize the nanotubes on the Si substrate. This will offer the possibility for future integration with conventional microelectronics as well as the development of novel devices.     

Using light to covalently immobilize and pattern nanoparticles onto surfaces

There is considerable current interest in developing methods to integrate nanoparticles into optical, electronic, and biological systems due to their unique size-dependent properties and controllable shape. We report herein a versatile new approach for covalent immobilization of nanoparticles onto substrates modified with photoactive, phthalimide-functional, self-assembled monolayers. Upon illumination with UV radiation, the phthalimide group abstracts a hydrogen atom from a neighboring organic molecule, leading to radical-based photografting reactions. The approach is potentially "universal" since virtually any polymeric or organic-inorganic hybrid nanoparticle can be covalently immobilized in this fashion. Because grafting is confined to illuminated regions that undergo photoexcitation, masking provides a simple and direct method for nanoparticle patterning. To illustrate the technique, nanoparticles formed from diblock copolymers of poly(styrene-b-polyethylene oxide) and laden with Hostasol Red dye are photografted and patterned onto glass and silicon substrates modified with photoactive phthalimide-silane self-assembled monolayers. Atomic force microscopy and X-ray photoelectron spectroscopy are applied to characterize the grafted nanoparticle films while confocal fluorescence microscopy is used to image patterned nanoparticle deposition.     

Synthesis of cadmium sulphide in pure and mixed Langmuir-Blodgett films of n -octadecylsuccinic acid

Cadmium sulphide (CdS) nanoparticles were grown by the reaction of sodium sulphide (Na₂S) with Langmuir-Blodgett (LB) films of cadmium salts ofn-octadecylsuccinic acid (ODSU) and with LB films of ODSU in mixtures of octadecylamine and octadecyl alcohol. The results indicate that heterogeneous nucleation and aggregation in the pure ODSU LB films due to processes like Ostwald ripening are destabilized by the presence of the long-chain amine and alcohol in mixed systems. CdS nanoparticles in the LB films were monitored by UV-visible absorption spectra, which allow an estimation of the size of the particles. The morphology, size and nature of the nanocrystallites formed depend on whether the sulphidation was done on the pure film or in the mixed films. It is seen that particles of size around 1.6 nm were formed in ODSU/octadecylalcohol and ODSU/ octadecylamine mixed LB films while in pure ODSU films the size was about 2.7 nm. These films showed typical needle-shaped structures, as observed by the optical microscopic technique. Mean size and morphology were confirmed by transmission and scanning electron microscopy, while selective area electron diffraction patterns showed six-fold symmetry and indicated that the CdS crystals grow epitaxially with respect to the monolayer. Further, the crystallisation enhanced in the mixed LB films showed a characteristic zinc oxide (Wurtzite) structure compared with the pure ODSU matrix.     

Using phospholipid Langmuir and Langmuir-Blodgett films as matrix for urease immobilization

The immobilization of enzymes in organized two-dimensional matrices is a key requirement for many biotechnological applications. In this paper, we used the Langmuir-Blodgett (LB) technique to obtain controlled architectures of urease immobilized in solid supports, whose physicochemical properties were investigated in detail. Urease molecules were adsorbed at the air-water interface and incorporated into Langmuir monolayers of the phospholipid dipalmitoyl phosphatidyl glycerol (DPPG). Incorporation of urease made DPPG monolayers more flexible and caused the reduction of the equilibrium and dynamic elasticity of the film. Urease and DPPG-urease mixed monolayers could be transferred onto solid substrates, forming LB films. A close packing arrangement of urease was obtained, especially in the mixed LB films, which was inferred with nanogravimetry and electrochemistry measurements. From the blocking effect of the LB films deposited onto indium tin oxide (ITO) substrates, the electrochemical properties of the LB films pointed to a charge transport controlled by the lipid architecture.     

Creating patterned carbon nanotube catalysts through the microcontact printing of block copolymer micellar thin films

We report a route for synthesizing patterned carbon nanotube (CNT) catalysts through the microcontact printing of iron-loaded poly(styrene-block-acrylic acid) (PS-b-PAA) micellar solutions onto silicon wafers coated with thin aluminum oxide (Al(2)O(3)) layers. The amphiphilic block copolymer, PS-b-PAA, forms spherical micelles in toluene that can form quasi-hexagonal arrays of spherical PAA domains within a PS matrix when deposited onto a substrate. In this report, we dip a poly(dimethylsiloxane) (PDMS) molded stamp into an iron-loaded micellar solution to create a thin film on the PDMS features. The PDMS stamp is then put in contact with a substrate, and uniaxial compressive stress is applied to transfer the micellar thin film from the PDMS stamp onto the substrate in a defined pattern. The polymer is then removed by oxygen plasma etching to leave a patterned iron oxide nanocluster array on the substrate. Using these catalysts, we achieve patterned vertical growth of multiwalled CNTs, where the CNTs maintain the fidelity of the patterned catalyst, forming high-aspect-ratio standing structures.     

基于粒子辅助水滴模板法制备仿生复眼结构的研究

将微粒“皮克林乳化效应”(Pickering emulsions)和水滴模板法(breath figure method)有机结合,探索通过建立粒子辅助的水滴模板法,实现纳米粒子在蜂窝状多孔膜内壁的自组装复合,构建微纳复合的多级仿生结构.并进一步利用聚二甲基硅氧烷(PDMS)复制转移技术,获得类似于复眼结构的多级微纳复合界面仿生结构.     

Tunable magnetic properties of nanoparticle two-dimensional assemblies addressed by mixed self-assembled monolayers

Assemblies of magnetic nanoparticles (NPs) are intensively studied due to their high potential applications in spintronic, magnetic and magneto-electronic. The fine control over NP density, interdistance, and spatial arrangement onto substrates is of key importance to govern the magnetic properties through dipolar interactions. In this study, magnetic iron oxide NPs have been assembled on surfaces patterned with self-assembled monolayers (SAMs) of mixed organic molecules. The modification of the molar ratio between coadsorbed 11-mercaptoundecanoic acid (MUA) and mercaptododecane (MDD) on gold substrates is shown to control the size of NPs domains and thus to modulate the characteristic magnetic properties of the assemblies. Moreover, NPs can be used to indirectly probe the structure of SAMs in domains at the nanometer scale.     

Self-patterned mixed phospholipid monolayers for the spatially selective deposition of metals

Metal-reactive organosulfur groups were patterned onto mica and silicon surfaces by dewetting instabilities during the Langmuir-Blodgett (LB) deposition of phase-separated mixed phospholipid monolayers. Monolayers were formed from binary mixtures of dipalmitoylphosphatidylcholine (DPPC), dilauroylphosphatidylcholine (DLPC), and their ω-methyldisulfide-dialkylphosphatidylcholine analogues, DSDPPC and DSDLPC. Patterns of highly parallel stripes of condensed DPPC or DSDPPC, protruding by 0.7-0.9 nm from a fluid matrix of DLPC or DSDLPC, were observed over areas extending at least 30 × 30 μm(2) in the LB films. The average stripe width varied from ca. 150 to 500 nm, depending on the lipid composition and deposition pressure. X-ray photoelectron spectroscopy confirmed that the phospholipid-monolayer-bound methydisulfides react with Au vapor to form a gold-thiolate species. The adsorption of thermally evaporated Au, Ag, and Cu onto DSDPPC/DLPC and DPPC/DSDLPC patterns was investigated by field emission gun scanning electron microscopy (FEGSEM) and atomic force microscopy (AFM). A change in phase contrast is observed in FEGSEM and AFM over the methyldisulfide-functionalized areas following metal deposition due to metal-thiolate bond formation. An increase in step height between the DSDPPC stripes and nonfunctionalized DLPC background following metal deposition, as well as the resistance of the metal-coated DSDPPC or DSDLPC regions to detergent extraction from the surface, attest to a selective metallization of the pattern. Our results indicate that the preferential adsorption of vapor-deposited metal onto the ω-methyldisulfide-terminated phase occurs at submonolayer coverages. The chemical reactivity exhibited by the organosulfur-modified phospholipid LB films make these templates potentially interesting for the fabrication of solid-supported patterns of metal nanostructures.     

Molecular organization and electrochemical reduction of a Ni(II)Porphyrin complex in LB films

In this work, mixed films of a tetra-cationic porphyrin, Ni(II)TMPyP, and an anionic phospholipid, DMPA, in molar ratio of 1:4, were formed at the air–water interface and transferred onto glass and optically transparent indium tin oxide (ITO) electrodes. Transmission spectroscopy (on glass and ITO) and cyclic voltammetry (on ITO) were used to infer the molecular organization and the electrochemical reduction of these LB films. Likewise, we compare the electrochemical reduction of the Ni(II)TMPyP in water solution with that in LB films. The porphyrin molecules in water solution show three two-electron reduction waves, which are related to the two-electron reduction of the central ring of the porphyrin and to the one-electron reductions of the four methyl–pyridyl groups of the molecule, respectively, while only two reversible one-electron reduction waves are observed in LB films corresponding to the reduction of the central ring of the porphyrin and to the Ni(II) to Ni(I) reduction, respectively.     

Magnetic Langmuir-Blodgett films of ferritin with different iron contents

Magnetic Langmuir-Blodgett films of four ferritin derivatives with different iron contents containing 4220, 3062, 2200, and 1200 iron atoms, respectively, have been prepared by using the adsorption properties of a 6/1 mixed monolayer of methyl stearate (SME) and dioctadecyldimethylammonium bromide (DODA). The molecular organization of the mixed SME/DODA monolayer is strongly affected by the presence of the water-soluble protein in the subphase as shown by pi-A isotherms, BAM images, and imaging ellipsometry at the water-air interface. BAM images reveal the heterogeneity of this mixed monolayer at the air-water interface. We propose that the ferritin is located under the mixed matrix in those regions where the reflectivity is higher whereas the dark regions correspond to the matrix. Ellipsometric angle measurements performed in zones of different brightness of the mixed monolayer confirm such a heterogeneous distribution of the protein under the lipid matrix. Transfer of the monolayer onto different substrates allowed the preparation of multilayer LB films of ferritin. Both infrared and UV-vis spectroscopy indicate that ferritin molecules are incorporated within the LB films. AFM measurements show that the heterogeneous distribution of the ferritin at the water-air interface is maintained when it is transferred onto solid substrates. Magnetic measurements show that the superparamagnetic properties of these molecules are preserved. Thus, marked hysteresis loops of magnetization are obtained below 20 K with coercive fields that depend on the number of iron atoms of the ferritin derivative.     

A comparative Langmuir-Blodgett study on a set of covalently linked porphyrin-based amphiphiles: a detailed atomic force microscopic study

A set of covalently linked phenyl-amidophenyl-substituted porphyrin amphiphiles with n-C15H31 tails have been synthesized and completely characterized. These amphiphiles form good Langmuir-Blodgett (LB) films at the air/water interface. Mean molecular areas for the series were measured from the isotherms and found to increase as the number of aliphatic chains increased from one to four. No influence of the subphase pH was observed on the isotherms. LB films can be transferred successfully onto different solid surfaces. The LB films were characterized using tapping mode atomic force microscopy (AFM). Bis-, tris-, and tetra-substituted porphyrins were found to be fairly good film-forming amphiphiles, whereas irregular aggregates were seen in the case of the monosubstituted porphyrin amphiphile. Multilayers were also formed with tetra-substituted amphiphiles on mica. Detailed AFM studies of tetra-substituted amphiphiles have been carried out to investigate the effect of preparation procedure and solid substrates on film formation and transfer. The absorption and fluorescence spectra for the amphiphiles in solution and LB films deposited onto mica and glass were recorded, which demonstrated the successful transfer of LB films onto the substrates and provided more information about the arrangement of porphyrin molecules within the LB films. For comparison, self-assembled monolayers (SAMs) and the cast thin films of the amphiphiles were prepared and characterized.     

Synthesis and characterization of poly(divinylbenzene)-coated magnetic iron oxide nanoparticles as precursor for the formation of air-stable carbon-coated iron crystalline nanoparticles

Maghemite (gamma-Fe2O3) nanoparticles of 15 +/- 3 nm diameter were prepared by nucleation of gelatin/iron oxide followed by growth of gamma-Fe2O3 films onto these nuclei. The gamma-Fe2O3 nanoparticles were coated with polydivinylbenzene (PDVB) by emulsion polymerization of divinylbenzene (DVB) in an aqueous continuous phase containing the gamma-Fe2O3 nanoparticles. The PDVB-coated gamma-Fe2O3 nanoparticles, dispersed in water, were separated from homo-PDVB nanoparticles using the high gradient magnetic field (HGMF) technique. The influence of DVB concentration on the amount of PDVB coating, on the size and size distribution of the coated gamma-Fe2O3 nanoparticles and on their magnetic properties, has been investigated. Air-stable carbon-coated iron (alpha-Fe/C) crystalline nanoparticles of 41 +/- 12 nm diameter have been prepared by annealing the PDVB-coated gamma-Fe2O3 nanoparticles at 1050 degrees C in an inert atmosphere. These nanoparticles exhibit high saturation magnetization value (83 emu g(-1)) and excellent resistance to oxidation. Characterization of the PDVB-coated gamma-Fe2O3 and of the alpha-Fe/C nanoparticles has been accomplished by TEM, HRTEM, DLS, FTIR, XRD, thermal analysis, zeta-potential, and magnetic measurements.     

Enzyme-octadecylamine Langmuir-Blodgett membranes for ENFET biosensors

Langmuir-Blodgett (LB) films containing butyrylcholinesterase (BuChE) are fabricated to realise an enzymatic field effect transistor (ENFET) for the detection of organophosphorus pesticides in water. Trichlorfon as a common pesticide is examined in our work. The BuChE-immobilised LB films are formed by adsorbing the enzyme molecules onto a stearylamine monolayer using the electrostatic force. Enzyme/stearylamine mixed LB films are immobilized onto a pH-ISFET surface and treated by glutaraldehyde vapour to improve the LB film's stability. The ENFET thus obtained worked as a potentiometric biosensor for trichlorfon detection on the basis of enzyme inhibition. The detection limit for trichlorfon can reach 10(-7) M (26 ppb). The surface characteristics of BuChE/stearylamine LB films obtained under various conditions of the dipping surface pressures are analysed qualitatively by atomic force microscopy (AFM) and analysed quantitatively by FTIR spectroscopy.     

Surface modification of indium tin oxide via electrochemical reduction of aryldiazonium cations

The facile deposition of para-substituted aryl films onto indium-tin oxide (ITO) electrodes by the electrochemical reduction of aryl diazonium salts in acetonitrile is reported. For the deposition conditions used in this report, the aryl film thicknesses are on the order of 1-6 nm, suggesting a multilayer structure. Regardless of the functional group on the aryl diazonium cation, (NO(2), CO(2)H, or fluorene) the electrodeposition behavior onto ITO electrodes is similar to that seen on other electrode materials. XPS and UV-vis data support the introduction of organic functional surface groups to ITO. The blocking behavior of the aryl films on ITO toward the Ru(NH(3))(6)(3+/2+) redox couple is in agreement with electron transfer through conjugated organic layers. The facile preparation of patterned aryl films with regular-spaced 700 nm voids on ITO is also described. Atomic force microscopy and scanning surface potential microscopy on patterned NO(2) aryl films are used to assess the molecular structure and orientation. A 100 mV decrease in the contact potential over NO(2) aryl films relative to bare ITO suggests that the aryl films are loosely structured as deposited with the NO(2) groups oriented at a small angle away from the ITO surface.     

Preparation and characterization of mono- and multilayer films of polymerizable 1,2-polybutadiene using the Langmuir-Blodgett technique

The essence of this study is to apply the Langmuir-Blodgett (LB) technique for assembling asymmetric membranes. Accordingly, Langmuir films of a (further) polymerizable polymer, 1,2-polybutadiene (1,2-pbd), were studied and transferred onto different solid supports, such as gold, indium tin oxide (ITO), and silicon. The layers were characterized both at the air/water interface as well as on different substrates using numerous methods including cyclic voltammetry, impedance spectroscopy, spectroscopic ellipsometry, atomic force microscopy, X-ray photoelectron spectroscopy, and reflection-absorption Fourier transform infrared spectroscopy. The Langmuir films were stable at the air-water interface as long as they were not exposed to UV irradiation. The LB films formed disorganized layers, which gradually blocked the permeation of different species with increasing the number of deposited layers. The thickness was ca. 4-7 ? per layer. Irradiating the Langmuir films caused their cross-linking at the air-water interface. Furthermore, we took advantage of the reactivity of the double bond of the LB films on the solid supports and graft polymerized acrylic acid on top of the 1,2-pbd layers. This approach is the basis of the formation of an asymmetric membrane that requires different porosity on both of its sides.     

DNA分子在气液界面的组装相变特性及其LB膜结构研究

对十八胺与DNA在气液界面上组装及其相变过程进行了研究，利用AFM观察了不 同压力下转移的DNA复合LB膜结构。发现在低表面压时，DNA复合单分子膜表现为技 术发散的分形结构；随着压力的升高，DNA复合膜逐渐由紧密的网状排布结构变为 团聚的块状和团簇结构。表明通过调节膜压，可使膜内DNA分子的构象发生大的变 化，从而生成具有特定形态的二维纳米图案。这种具有特殊形态和结构的DNA LB膜 可望为合成新型生物纳米结构有序功能体系提供模板。