模板-聚合法Pd/Al2O3催化剂制备及其蒽醌加氢性能研究

以丙烯酸铵为模板剂,由油柱成型法制备了系列球形Al2O3载体,采用XRD、BET等分析测试手段对其晶体结构、比表面积、孔容和孔径分布进行了表征,结果表明,600℃焙烧的球形γ-Al2O3载体具有介孔结构,并且比表面较不使用模板剂的样品有大幅度增加。焙烧温度升至960℃得到δ-Al2O3,介孔结构消失,但由于结构记忆效应,载体的大表面特性得以保持。以δ-Al2O3为载体制备Pd/Al2O3催化剂,采用氢-氧滴定(HOT)方法测定发现,比表面的增加显著提高了Pd金属的分散度,从而大幅度提高了催化剂的蒽醌加氢活性,氢化效率最高可达10.5 g.L-1。     

磷化镍催化剂的制备机理及其加氢脱氮性能

采用热重-质谱联用技术研究了次磷酸盐在氮气中的热分解过程,探讨了次磷酸盐热分解法制备磷化镍的反应机理:次磷酸镍中的Ni²⁺能够"催化"H₂PO₂^-低温发生歧化反应生成PH₃,继而还原Ni²⁺得到Ni₂P。制备了不同负载量的Ni₂P/SiO₂催化剂,用X射线衍射(XRD)、低温N₂吸附-脱附、高分辨透射电镜(HRTEM)等分析技术对催化剂结构进行表征。结果表明,Ni₂P活性组分在SiO₂载体上具有良好的分散性,颗粒粒径为5～8 nm。以喹啉为加氢脱氮模型化合物,在高压微型固定床反应器上对催化剂活性进行评价,在反应温度为360℃、氢气压力为2.0 MPa、液时空速为2.0 h^-1、氢油体积比为500:1时,Ni₂P(20%)/SiO₂催化剂的加氢脱氮率为41.5%。     

Ni-Mo/Al_2O_3催化剂上硫转移反应的研究

制备了以γ-Al2O3为载体的Ni-Mo催化剂,并用于FCC汽油的加氢硫转移反应。对Ni-Mo/Al2O3催化剂上的硫转移反应机理进行了研究,考察了不同反应条件对硫转移反应的影响。实验结果表明,硫醇与烯烃的反应在催化剂表面的加氢活性位上进行,小分子的硫醇发生加氢脱硫,生成吸附态H2S,吸附态的H2S与烯烃反应,生成大分子硫醇和硫醚;另外小分子硫醇还可直接与烯烃发生反应,生成硫醚。提高反应温度、压力、氢油比或降低空速,均可提高催化剂的硫转移反应活性,轻质硫转化率得到明显提高,且单烯选择性还能维持在98%左右。     

Solvent extraction of U(VI) by trioctylphosphine oxide using a room-temperature ionic liquid

The unique physical and chemical properties of room-temperature ionic liquids(RTILs) have recently received increasing attention as solvent alternatives for possible application in the field of nuclear industry, particularly in liquid-liquid separations of radioactive nuclides. We investigated solvent extraction of U(VI) from aqueous solutions into a commonly used ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide([C4mim][NTf2]) using trioctylphosphine oxide(TOPO) as an extractant. The effects of contact time, TOPO concentration, acidity, and nitrate ions on the U(VI) extraction are discussed in detail. The extraction mechanism was proposed based on slope analysis and UV-Vis measurement. The results clearly show that TOPO/[C4mim][NTf2] provides a highly efficient extraction of U(VI) from aqueous solution under near-neutral conditions. When the TOPO concentration was 10 mmol/L, the extraction of 1 mmol/L U(VI) was almost complete( 97%). Both the extraction efficiency and distribution coefficient were much larger than in conventional organic solvents such as dichloromethane. Slope analysis confirmed that three TOPO molecules in [C4mim][NTf2] bound with one U(VI) ion and one nitrate ion was also involved in the complexation and formed the final extracted species of [UO2(NO3)(TOPO)3]+. Such a complex suggests that extraction occurs by a cation-exchange mode, which was subsequently evidenced by the fact that the concentration of C4mim+ in the aqueous phase increased linearly with the extraction percent of U(VI) recorded by UV-Vis measurement.     

正溴丁烷合成虚拟仿真系统的设计与辅助实验教学研究*

介绍了正溴丁烷合成虚拟仿真系统的设计与功能,并结合具体的教学实践和研究结果的对比分析,提出了虚实结合的混合式教学模式,这种教学模式能有效解决传统实验教学过程中实验预习效果差、过程性评价难的教学痛点。     

基于光楔阵列产生光学涡旋阵列的研究

在研究光楔衍射法产生单涡旋的基础上,基于长条形光楔阵列,提出了利用光束阵列衍射产生涡旋阵列的方法.该方法要求光束阵列在平行于光楔边缘方向上的光束间距等于光束直径的整数倍.利用超精密机床采用一体化加工法加工了光楔阵列元件,验证了该方法的可行性.利用空间光调制器快速灵活调整光束阵列的优点,搭建了借助空间光调制器加载达曼光栅衍射产生所需光束阵列的实验光学系统.针对光束阵列与光楔阵列的匹配问题,研究了达曼光栅掩模图基本单元对光束阵列的调控,获得了可调结构的光束阵列.实验产生了拓扑荷一致的光学涡旋阵列,与仿真结果相一致,证明所提方法的有效性.     

液态丙烯腈低聚物修复聚丙烯腈基碳纤维微孔缺陷

提出一种全新的缺陷修复的方法,即将聚丙烯腈基(PAN)碳纤维T300在液态丙烯腈低聚物(LAN)中浸渍后,再进行预氧化和碳化热处理,可以将T300的拉伸强度提高25%.应用二维小角X射线散射(SAXS)法可以计算出LAN修复缺陷前后T300微孔缺陷的长度(L)、横截面尺寸(lp)、取向角(Beq)、相对体积(Vrel)的变化,结果表明碳纤维的拉伸性能越好,微孔的长度、取向角、相对体积含量越小.T300拉伸性能的提高是由于缺陷修复的结果.应用BET比表面积法、扫描电子显微镜(SEM)表征LAN修复缺陷前后T300的比表面积以及表面形貌的变化,结果表明,T300在LAN中浸渍并经过预氧化和碳化热处理,比表面积变小,表面缺陷明显减少.进一步验证LAN对碳纤维中的微孔缺陷具有修复作用.应用X射线光电子能谱(XPS)法表征LAN修复前后T300表面化学成分的变化,结果表明,LAN修复后含氧官能团(C―OH,C=O,HO―C=O)显著增加,有利于增强碳纤维与树脂基体之间的相互作用,从而提高碳纤维的力学性能.     

微波消解-电感耦合等离子体质谱法测定粮食中12种重金属元素

粮食样品用硝酸-过氧化氢微波消解处理,采用电感耦合等离子体质谱法测定样品溶液中12种重金属元素(砷、铅、镉、硒、铬、铊、锰、镍、铜、铀、钴、钒)的含量。采用内标法消除基体的影响。方法的检出限(3S/N)在0.092~17.5pg·g-1之间。方法的加标回收率在88.1%~118%之间,相对标准偏差(n=5)小于6.0%。方法用于鸡肉标准物质(GBW 10018)中重金属含量的测定,测定值与认定值相符。     

Tuning of NaTaO_3 Band Structure through Mn~（2＋） Ion Doping and the Enhanced Visible Light Response

Pure and Mn-doped NaTaO3 nanoparticles were synthesized by a simple hydro- thermal method. XRD and XPS results suggested that manganese ions were successfully doped into the NaTaO3 crystalline in Mn2＋ state. UV-vis diffuse reflectance spectra revealed the obvious red-shift in the series of manganese doped NaTaO3 nanoparticles, resulting in a decrease in the band gap of NaTaO3 with the increase of Mn2＋ doping concentration. The photo-degradation experiment indicated that manganese doped NaTaO3 showed good photocatalytic performance and methylene blue（MB） degradation is improved with lower doping concentration of manganese ions under visible light. The simulation of energy band structure by density functional theory unfolded that the substitution of Ta5＋ ions by Mn2＋ ions resulted in an intermediate band（IB） below the bottom of the conduction band（CB）, which was mainly attributed to the state of Mn 3d.     

银纳米簇荧光探针检测L-半胱氨酸

常温下合成了二氢硫辛酸(DHLA)包裹的银纳米簇(AgNCs),并基于L-半胱氨酸对AgNCs的荧光猝灭现象构建了AgNCs荧光探针对Cys的检测方法。结果表明,在优化条件下,AgNCs的荧光猝灭程度和Cys浓度在2.0~100μmol/L范围内呈现良好的线性关系(R2=0.998),检出限为1.77μmol/L(S/N=3)。在人体血清样品中Cys检测的加标回收率为94.0%~102.4%。