带甲基侧基的环氧树脂增容剂对炭黑在丁苯橡胶中分散度的影响

用自制的带甲基侧基的环氧树脂(TMBP)作为界面增容剂, 从拉伸性能、键合胶含量、动态性能、扫描电镜和流变性能等方面, 研究了TMBP对炭黑在丁苯橡胶中分散度的影响, 并与市售通用双酚A型环氧树脂(E-51)和橡胶工业常用软化剂邻苯二甲酸二辛酯(DOP)进行了比较. 结果表明, 带甲基侧基的环氧树脂TMBP在提高炭黑分散性方面的效果远比E-51好， 其作用模式具有典型的增容特性.     

Small Peptides Catalyzed Direct Aldol Reactions of Aldehydes with Hydroxyacetone with Regiocontrol in Aqueous Media

Very recently, we[1] found that L-proline amides and dipeptides acted as efficient catalysts for the asymmetric direct aldol reaction. We report here that L-proline-based peptides 1～5 can catalyze the aldol reactions of hydroxyacetone with aldehydes 6 in aqueous media, to give 1,4-diols (7), the disfavored products with either aldolase or L-proline. Both peptides 3 and 4 give good results.     

(R)-2-羟基-4-苯基丁酸乙酯的合成

综述了血管紧张素转化酶抑制剂类治疗高血压和充血性心力衰竭药物的关键中间体（R）－2－羟基－4－苯基丁酸乙酯的合成方法。参考文献25篇。     

溶剂热还原法制备蛋壳状碳材料

Eggshell-like carbon materials with high yields have been synthesized by a solvothermal route in a stainless steel autoclave using metallic zinc and absolute ethanol as starting materials. The products were characterized by X-ray powder diffractometry (XRD)， energy-dispersive X-ray spectroscopy (EDX)， Raman spectroscopy and scanning electron microscopy (SEM). The eggshell-like carbon spheres had diameters ranging from 500 nm to 1 μm. The optimal reaction conditions to obtain eggshell-like carbon materials were 600 ℃ and 12 h.     

N-(6-甲基-2-亚甲基吡啶)-( )-樟脑亚胺体系的不对称烷基化反应

目前,不对称合成光学活性化合物取得了较大进展,不对称合成α-氨基酸、β-氨基醇、α-取代苄胺的报道很多。但是,不对称合成生物碱类物质——α-取代氨甲基吡啶类化合物还未见文献报道,而此类化合物有潜在的应用前景。为此,我们以( )-樟脑为手性试剂     

碳包覆LiFePO4的一步固相法制备及高温电化学性能

Carbon coated LiFePO₄ cathode material was synthesized by one-step solid-state reaction and characterized by X-ray diffraction (XRD), field-emission-scanning electron microscope (FESEM). Electrochemical performances of the material as cathode in lithium-ion battery were investigated at medium and elevated temperature (30 and 55 ℃) by galvanostatic charge-discharge and A.C. impedance tests. The results show that carbon coated LiFePO₄ powder exhibits a well-crystallized olivine structure and spherical morphology with an average particle size of about 500 nm. Galvanostatic charge-discharge tests show that the reversible discharge capacity at 1 C and 1.5 C rates was improved from 121 and 105 mAh·g^-1 at 30 ℃ to 136 and 123 mAh·g^-1 at 55℃, respectively, while the enhancement of high temperature on electrochemical performance is less obvious at a rate lower than 0.5 C. Impedance spectra analyses indicate that the cathode material has a remarkably higher lithium-ion diffusivity at 55 ℃ than that at 30 ℃, which improves the electrochemical performance at high temperature.     

批量离子交换层析和凝胶过滤层析在类人胶原蛋白I纯化中的应用

研究了利用批量离子交换层析与凝胶过滤层析相结合的方法纯化类人胶原蛋白I的最佳条件。分别考察了不同离子交换树脂、缓冲溶液pH、离子强度、进料蛋白浓度对批量离子交换的影响,以及不同凝胶过滤介质对凝胶过滤层析的影响。结果表明,采用阴离子交换树脂DEAE52吸附杂蛋白,缓冲液pH为7.0,NaCl浓度为0.2mol/L,进料蛋白浓度为40mg/mL,并采用凝胶过滤介质SephadexG-100进一步纯化后,类人胶原蛋白I的纯度可达到98.2%,总纯化倍数为3.1,总回收率为80.6%。SDS-PAGE分子量分析和N末端氨基酸序列分析均表明纯化后的类人胶原蛋白I与基因设计一致。     

锂离子电池负极合金CoSn和Cu-Sn的制备与表征

CoSn alloy and Cu-Sn samples were synthesized by H₂-reduction following solid-state reaction between Co(Ⅱ)， Cu(Ⅱ)， Sn(Ⅳ) and NaOH at ambient temperature. The samples were characterized by XRD， SEM. The results showed that CoSn alloy (80～200nm) is globe-shaped， ultrafine hexagonal material， and Cu-Sn alloy powder consists of two phases， i.e. Cu₆Sn₅ and Cu₃Sn. Cu-Sn powder has spherical morphology and the particle size is estimated to be 60～70nm. The electrochemical performances of CoSn alloy and Cu-Sn powder were studied using lithium-ions model cell Li/LiPF₆ (EC+DMC)/CoSn (or Cu-Sn). It was demonstrated the reversible discharge capacities for 10 cycles keep above 280mAh·g^-1 for nanophase Cu-Sn， and 60mAh·g^-1 for CoSn alloy. Differ-ential capacity plots showed that the reaction mechanisms of Cu-Sn with lithium were reversible.     

超球谐展开的收敛行为He原子的^3S态

利用相关函数－超球谐－广义Ｌａｇｕｅｒｒｅ函数方法，研究Ｈｅ原子＾３Ｓ态波函数向超球谐函数展开的收敛行为。截止于ｌ＝０，１，２的超球谐函数给出的本征能分别与组态相互作用的ｓ－，ｓｐ－，ｓｐｄ－极限能一致。仅用４４个超球谐函数，便得到了与精确的ＨｙｌｌｅｒａａｓＣＩ变分能量小数点后第５位的２＾３Ｓ，３＾３Ｓ的４＾３Ｓ态本征能吻合。     

高密度燃料HDF-1与橡胶的相容性研究

报道了在室温和70 ℃下橡胶材料G402氟硅胶、丁腈胶5171、丁腈胶4170、贮囊橡胶用合成的高密度燃料HDF-1浸泡后性能如伸长率、邵尔硬度、重量、面积体积的变化，并与采用3号喷气燃料（RP-3）实验结果进行对照。用红外光谱测定了燃料浸泡前后橡胶组成的变化。实验结果表明，G402氟硅胶和贮囊对于HDF-1和RP-3有相近的相容性，丁腈胶5171对HDF-1的相容性比对RP-3的相容性稍差，丁腈胶4170对HDF-1的相容性比对RP-3的相容性更差的结果。因此，丁腈胶5171和丁腈胶4170不能用于HDF-1储存和输送，原使用RP-3系统的橡胶密封件不能直接使用HDF-1。