三核铜（I）配合物的合成与荧光光谱

室温下，通过双核配合物[Cu(dppm)(NO3)]2(dppm=双二苯基膦甲烷)与四苯基硼钠在甲醇和二氯甲烷混合溶剂中反应制备了三核铜(I)配合物[Cu3(dppm)3(NO3)(OH)](NO3)，经过红外光谱、热重分析、核磁和ES-MS等现代分析手段表征了配合物的物理化学性质，并进一步研究了配合物在室温下的荧光光谱特征。     

CFD在燃煤细粒子凝聚过程中的应用

燃煤产生的细粒子富集了大量的有毒痕量元素,对大气环境和人类健康造成严重危害。本文针对燃煤细粒子的形成过程,在计算流体力学(CFD)的基础上,结合气溶胶动力学理论,模拟了烟气中细粒子在圆柱形流场中由于碰撞而凝聚的过程,并通过计算结果分析细粒子颗粒特征参量(速度、质量、直径和颗粒数目)随流场的变化趋势,为深入研究燃煤细粒子的形成演化机理提供理论基础。     

培养学生的兴趣、独立性、自主性与素质教育

30年前,甚至十几年前物理系还是一个众生向往的殿堂,那些决心献身科学并且品学兼优的佼佼者进入到这个领域,从而受到同龄人的尊敬和羡慕.一代优秀的物理学工作者就是在这个环境中成长起来,成为今天物理科研与教学领域的中坚力量.然而随着时代的发展,社会的需求,职业市场的选择以及人们价值观的改变,部分优秀的中学毕业生选择了更现实的领域,如经济、计算机等,他们毕业后可以较轻松地获得工作条件优越,报酬丰厚的职业.因而大量的人才从物理学,特别是纯物理学领域中流失了.这些年再加上出国留学热,甚至在高中毕业就已走上出国之路,对我们人才培养的冲击之大是难以估计的.物理学在许多学生及家长眼中已沦为第二等的学科,或是不得已的选择.     

发光材料[ZnxMg6-xAl2(OH)16]2+[S·2H2O]2-∶Mn2+的光致发光

本文报道了过渡金属Mn2+离子的含量对二维纳米发光材料[ZnxMg6-xAl2(OH)16]2+[S*2H2O]2-发光强度的影响,并研究了其他合成条件如Zn2+含量、硫化时间、灼烧温度等对发光材料、发光强度的影响.     

A Dominated Theorem on 5L(2, R) and Its Application

In this paper, we give the following dominated theorem: Let φ(g) ∈ L1(G//K),φε(t)=ε> 0, and the least radical decreasing dominatedfunction φ(t) = sup |φ(y)| ∈L1(G//K). If shtφ(t) is monotonically decreasingon (0, ∞), then for any f∈L1loc(G//K) , the following inequality holds:sup |φε * f(x)| ≤ Cmf(x),where mf(x) is the Hardy-Littlewood maximal function of f, and C = ||φ||1.An application of this dominated theorem is also given.     

一类非线性微分方程的脉冲镇定

针对一般形式的常微分系统提出了脉冲指数镇定的概念，具体研究了一类分离变量型非线性常微分方程的脉冲镇定问题，得到了该方程可脉冲指数镇定的充分判据，全文的概念及结论突出了脉冲在方程稳定性方面的控制效果。     

能谱法和催化光度法测定无机纤维中铁含量的比较研究

本文研究了铁(Ⅲ)在酸性介质中催化抗坏血酸(Vc或H2A)还原4-硝基-3’-甲基-氨基偶氮苯的褪色反应,拟定了反应的最佳条件,探讨了反应机理,建立了催化动力学测定痕量铁的新方法,该方法的检出限为2.98×10~(-11)g·mL-1,线性范围为0-200 ng·(25 mL)-1。比较了X射线能量色散谱法和催化光度法在玄武岩纤维样品中铁含量的测定,结果误差为2.89％。     

可压稠密气固两相流动过程的模拟计算

基于稠密气体分子运动论和颗粒动理学,建立可压稠密气固两相流动模型。采用梯度模拟来考虑气相可压缩性对气相湍流的影响。模拟计算表明气固两相射流速度沿轴向和径向减小,颗粒浓度下降。气固两相射流具有高的颗粒温度,呈现强烈的气固两相湍流流动特性。     

Analysis and combined optimization of the cladding layer in outcoupling-improved top emitting OLEDs

Within the associated framework of metal-dielectric films optics and the dual-metal-mirror microcavity structure, the effect of a cladding dielectric layer on the light outcoupling efficiency of the top emitting orgainic light-emitting devices (OLEDs) is analyzed. A combined evaluation followed by detailed design and optimization is proposed and described in detail. The analysis shows that this cladding layer affects the device's outcoupling efficiency with three different extents as the thickness of the metal layer in the multilayer cathode varying. The simulation results give a reasonable agreement with former experiment results.     

Harmonic beam splitter design and fabrication

Two problems of half-wave hole and high ripples in the transmittance region for a harmonic beam splitter had been pointed out and analyzed. Based on the application of a half-wavelength control and a new admittance matching methods, a harmonic beam splitter was designed and fabricated. The former method eliminated the half-wave hole fundamentally, and the latter smoothed high ripples in the transmittance region effectively. The matching stack consisted of a symmetrically periodic structure and provided a complete matching at the desired wavelength, i.e., both conditions for the equivalent admittance and phase thickness were fulfilled. Furthermore, both the theoretical and the tested curves had been given, and a good agreement between them was obtained.