排序方式: 共有110条查询结果,搜索用时 67 毫秒
1.
超宽带减反射膜的设计和制备 总被引:3,自引:0,他引:3
设计了400~900 nm波段上的超宽带减反射膜,在410~850 nm范围内的平均残余反射率设计值约为0.2%,在设计的全波段上约为0.24%.讨论了初始膜系结构的选择原则,分析了带宽、膜层折射率差、最外层折射率和膜层总厚度等因素对宽带减反射特性的影响.对特定的带宽.增加两种薄膜材料的折射率差和选择尽可能低的最外层折射率对获得优良的减反射特性是非常重要的.实验制备了K9玻璃上TiO2/MgF2两种材料组成的8层结构的超宽带减反射膜,实测结果表明,在带宽520 nm范围内的平均残余反射率约为0.44%,说明用二种材料设计超宽带减反射膜是成功的,对垂直入射的减反射膜.多种材料的膜系并不比两种材料更具优越性. 相似文献
2.
A novel method to measure the absolute phase shift on reflection of thin film is presented utilizing a white-light interferometer in spectral domain. By applying Fourier transformation to the recorded spectral interference signal, we retrieve the spectral phase function Ф, which is induced by three parts: the path length difference in air L, the effective thickness of slightly dispersive cube beam splitter Teff and the nonlinear phase function due to multi-reflection of the thin film structure. We utilize the fact that the overall optical path difference (OPD) is linearly dependent on the refractive index of the beam splitter to determine both L and Teff. The spectral phase shift on reflection of thin film structure can be obtained by subtracting these two parts from Ф. We show theoretically and experimentally that our new method can provide a simple and fast solution in calculating the absolute spectral phase function of optical thin films, while still maintaining high accuracy. 相似文献
3.
<正>We present a new and efficient method for the design of dispersive multilayer by employing a particle swarm optimization(PSO) technique.Its mathematical background is given and an adaptive PSO is realized with computer code.Two practical designing tasks are solved with this method,and the obtained results are competitive compared with other published structures.The adaptive PSO method demonstrates its merits of fast convergence and powerful global search ability,and could be used as a valuable tool for the optical thin film design. 相似文献
4.
采用ZYGO MarkIII-GPI数字波面干涉仪对以K9玻璃为基底的电子束蒸发方法制备的HfO2薄膜中的残余应力进行了研究,讨论了沉积速率、氧分压这两种工艺参量对HfO2薄膜残余应力的影响.实验结果表明:在所有的工艺条件下,薄膜的残余应力均为张应力;随着沉积速率的升高,氧分压的减小,薄膜的堆积密度逐渐增大,而残余应力呈减小趋势.同时用X射线衍射技术测量分析了不同工艺条件下HfO2薄膜的晶体结构,探讨了HfO2薄膜晶体
关键词:
残余应力
2薄膜')" href="#">HfO2薄膜
沉积速率
氧分压 相似文献
5.
6.
薄膜法布里-珀罗滤光片中的超棱镜效应 总被引:2,自引:0,他引:2
基于薄膜法布里珀罗滤光片在其峰值波长处具有较大群延迟的特性,设计并从实验上验证了光束倾斜入射时这种结构中存在的超棱镜效应。根据光学薄膜理论中的特征矩阵法,数值模拟计算了器件的群延迟和空间色散曲线,镀制并对器件进行了测试。测试结果表明器件在透射峰值波长处因超棱镜效应引起的空间色散最大位移值达到65μm,与理论计算结果非常吻合;相对于传统的光栅和棱镜器件而言器件具有更高的空间角度色散,实际测试在784.5 nm至786.5 nm波长范围内器件的角色散达到30°/nm。 相似文献
7.
复眼透镜提高液晶投影照明系统的能量利用率 总被引:10,自引:6,他引:4
照明系统是液晶投影仪的重要组成部分.它将直接影响到投影仪的光能利用率以及色彩等系统性能。对于复眼照明系统,复眼透镜的良好设计可以大人提高系统的能量利用率。在对液晶投影照明系统的原理进行分析的基础上,提出了两种复眼透镜的设计方案。两种方案均采用矩形子复眼,便于设计和加工。通过对复眼透镜中每个子复眼进行偏心以及改变其形状大小来提高系统能量利用率。计算机模拟结果表明,两种设计方案与传统设汁相比,在光能利用率上分别提高了16.5%和26.3%,并且具有较高的均匀性。最后,还对两种复眼透镜的设计方案进行了分析和比较。 相似文献
8.
9.
10.