微型投影机光学引擎的研究

设计了一种针对个人用户使用的微型投影机光学引擎,系统为单片式数字光线处理器结构,采用红绿蓝三色大功率高亮度发光二极管作为光源,使用X棱镜作为合色元件,从而实现38.1～50.8 cm的彩色投影显示.对设计结果进行理论分析后可知,设计结果满足投影显示对颜色的要求,光学引擎的理论效率为16.1%.同时利用Light Tools仿真软件对系统进行建模分析,300万条光线追迹仿真的结果表明,光学引擎的效率为14.6%,与理论分析结果基本符合,屏幕上光通量为22.8 lm,其美国国家标准协会规定的九点照度均匀性达到91.55%和-93.36%,满足设计要求.     

EMD与神经网络在气液两相流流型识别中的应用

本文提出了EMD与Elman神经网络相结合的气液两相流流型识别的新方法.将压差波动信号经验模态分解(EMD)后的固有模态函数(IMF)进行分析、提取IMF能量作为Elman神经网络的输入特征向量,对水平管内的气液两相流流型进行识别.实验结果表明:该方法优于BP网络且稳定、识别率高,具有可行性.     

Six-Fold Degenerate Dark States in a Four-Level Atomic System

With all driving fields on Raman resonance, a tripod-type atomic system quickly evolves into a dark state decoupled from the lossy excited level. The dark state depends strongly on field Rabi frequencies, spontaneous decay rates, and the initial atomic population in a complicated way. Analytical results reveal that it is a sixfold degenerate dark state with its three components superposed both coherently and incoherently due to population redistribution from spontaneous emission.     

Efficiency Enhancement of Dye-Sensitized Solar Cells： Using Salt CuI as an Additive in an Ionic Liquid

Energy conversion efficiency of the dye-sensitized solar cell is improved from 3.5% to 4.5% by adding a small amount of CuI into an ionic liquid electrolyte. It is found that other copper-I salts, for example, CuBr, have the same effect for the dye-sensitized solar cell. Experimental results show that no Cu^2＋ ions exist in this electrolyte. It is suggested that this improvement is caused by the adsorption of Cu^＋ onto the TiO2 porous film.     

窄脉宽激光诱导背向选择性去除金属薄膜制备微电路(特邀)EI北大核心CSCD

为了在透明基板上制备出导电性能良好的微电路,研究了窄脉宽激光正向和背向选择性去除金属薄膜制备的微结构形貌特征,开展了纳秒激光选择性去除Cu薄膜(厚度为150 nm)的实验和温度场仿真研究,揭示了正、背面去除的烧蚀机理和材料的喷射机制。实验结果表明,当激光脉冲能量为0.270~0.542μJ,扫描速度为2 mm/s时,激光诱导背向去除金属薄膜在加工质量方面优于正向加工,其去除几何精度高,轮廓边缘平整,几乎没有溅射。采用优化后的纳秒激光加工工艺参数,激光脉冲能量为0.403μJ,扫描速度2 mm/s,扫描线间距为3μm,制备出均匀分布的铜阵列图案。在相同参数下对玻璃基板上的铜薄膜背向选择性去除,得到具有良好导电性和粘附性的微电路。     

添加钇提高不锈钢耐蚀性能的AES研究

用俄歇能谱仪对比研究了添加０．２％Ｙ对高硅不锈钢在９３％Ｈ２ＳＯ４介质中所形成的钝化膜中各元素浓度分布的影响，添加０．２％Ｙ增大了ＳｉＯ２在不锈钢钝化膜中的比例，从而使合金中Ｓｉ可充分形成富ＳｉＯ２的钝化膜。     

罗丹明类测定三聚氰胺的荧光探针的合成及应用研究

报道了罗丹明乙二醛酰腙的合成及与三聚氰胺的反应。在pH 3.0的缓冲溶液中三聚氰胺对罗丹明乙二醛酰腙的荧光强度有增强作用,其增强程度与三聚氰胺的浓度成正比,据此建立了一种新的测定三聚氰胺含量的荧光分析法。该方法线性范围为0.5~10.0 mg/L,r=0.994,检出限为0.15 mg/L,样品测定的RSD为1.7%(n=7)。     

Analysis of secondary electron emission using the fractal method

Based on the rough surface topography with fractal parameters and the Monte–Carlo simulation method for secondary electron emission properties, we analyze the secondary electron yield(SEY) of a metal with rough surface topography. The results show that when the characteristic length scale of the surface, G, is larger than 1 × 10^-7, the surface roughness increases with the increasing fractal dimension D. When the surface roughness becomes larger, it is difficult for entered electrons to escape surface. As a result, more electrons are collected and then SEY decreases. When G is less than 1 × 10^-7,the effect of the surface topography can be ignored, and the SEY almost has no change as the dimension D increases. Then,the multipactor thresholds of a C-band rectangular impedance transfer and an ultrahigh-frequency-band coaxial impedance transfer are predicted by the relationship between the SEY and the fractal parameters. It is verified that for practical microwave devices, the larger the parameter G is, the higher the multipactor threshold is. Also, the larger the value of D,the higher the multipactor threshold.     

组合导航系统多重衰减因子自适应估计算法比较研究

提出了多重衰减因子自适应估计卡尔曼滤波方法,用该方法对系统每个误差状态估计进行控制,提高滤波器的估计性能。仿真结果表明,新算法在系统噪声特性不准确的情况下,能够抑制卡尔曼滤波估计的发散,GPS/SINS组合导航精度比强跟踪滤波估计的精度高。这种算法推导形式简单,计算量小,适合在线运算。