超分子结构二氟尼柳插层镁铝水滑石的合成与表征

采用离子交换和共沉淀两种不同方法将二氟尼柳插入镁铝水滑石层间，得到一种新型的有机-无机层状复合材料。通过X射线粉末衍射、红外光谱、元素分析和热重-差热等手段对材料进行了表征。结果表明，离子交换法和共沉淀法成功地将二氟尼柳插入水滑石，得到的材料层状结构完整、晶相单一，且层间距均大于二氟尼柳分子尺寸，扩大为1.81～2.14 nm；二氟尼柳插入后，复合水滑石材料的热稳定性大幅度提高。客体二氟尼柳与主体层板之间存在超分子作用力，二氟尼柳分子的羧基与水滑石层板之间相互作用，以双层倾斜交替地排列于层板之间。此外，根据其超分子作用力建立了二氟尼柳插层镁铝水滑石的超分子结构模型。     

Electrochemical Approach for the Production of Layered Double Hydroxides with a Well-Defined Co/MeIII Ratio

Layered double hydroxides (LDHs) have been widely studied for their plethora of fascinating features and applications. The potentiostatic electrodeposition of LDHs has been extensively applied in the literature as a fast and direct method to substitute classical chemical routes. However, the electrochemical approach does not usually allow for a fine control of the M^II/M^III ratio in the synthesized material. By employing a recently proposed potentiodynamic method, LDH films of controlled composition are herein prepared with good reproducibility, using different ratios of the trivalent (Fe or Al) to bivalent (Co) cations in the electrolytic solution. All the obtained materials are shown to be effective oxygen evolution reaction (OER) catalysts, and are thoroughly characterized by a multi-technique approach, including FE-SEM, XRD, Raman, AES and a wide range of electrochemical procedures.     

类水滑石材料在核废水处理领域的应用

核能已成为我国能源结构的重要组成部分, 但含放射性物质的废水所带来的危害不容忽视. 如何高效解决核废水污染问题迫在眉睫. 类水滑石材料是一类阴离子型粘土化合物, 因其层板组成及层间阴离子种类的可调控性、 较大的比表面积及粒径和形貌的可调控性等特点已在含放射性核素废水的处理中崭露头角. 本文主要阐述了类水滑石材料对废水中放射性核素的吸附行为及其作用机制, 探讨了存在的问题及可能的解决方法, 并对其发展前景进行了展望.     

Ni-Al layered double hydroxides electrodeposition from a chloride solution

Ni-Al LDHs was electrodeposited from a NiCl₂-AlCl₃ solution. In order to analyze the electrodeposition process, electrolytes with initial Al content range of 0–20% were used. With increasing Al content in the sample, the preferred orientations of (0 0 3) and (0 0 6), increased crystallinity, and decreased interlayer spacing were observed from the XRD results. A dissolution–recrystallization of (0 0 3) plane was detected among the Ni-Al LDHs from the strongly alkaline solution soaking results, which was found to be conducted easily in high Al-containing samples. The pH of the Al-containing electrolyte was much lower than that of pure NiCl₂ solution because lower pH was needed to start a precipitation reaction in the AlCl₃-NiCl₂ solution. The electrodeposition yield and current efficiency were found to decrease obviously in the electrolytes with initial Al content higher than 10%, which was attributed to the increasing Al content in the sample and diffusion of the complex ions. The electrodeposition pattern was in-situ in the electrolyte initially containing 10% Al, then, it developed toward and off in-situ in electrolytes initially containing 0–10% and 10–20% Al.     

LDHs薄膜基纳米荧光传感器的制备及其研究进展

层状复合氢氧化物(LDHs)是一种层板金属元素和层间离子可调的无机层状材料,利用其独特的插层组装特性,基于静电、氢键、范德华力等相互作用力,功能性荧光客体分子可与LDHs纳米片复合构筑多功能荧光薄膜材料.LDHs薄膜基荧光材料用于荧光传感器,在有机挥发性气体(VOCs)、温度、压力、重要生物分子等的检测中显示了良好性能.本文总结了LDHs复合薄膜的制备方法以及近年来其在纳米荧光传感领域的进展,并对其未来发展做出了展望.     

A Prospect for Environmental Remediation of Perchlorate via Cost-Effective Pinus Leaves and Dandelion Flower Powder-based Layer Double Hydride (LDH) Sorbents

In this study, pine leaves powder (PiP) and dandelion flower powder (DFP) were repurposed to synthesize layered double hydroxides (LDHs) to form a base for sorbents used in perchlorate remediation from wastewater. The effects of the adsorbent dose, pH, thermodynamics, and coexisting ions were evaluated in batch experiments. The results revealed that 0.1 g adsorbent (PiP-LDH and DFP-LDH) removed 97% and 93% of perchlorate contaminants, respectively. In this study, the correlation coefficient of pseudo-second-order was higher than pseudo-first-order for all the LDHs. The kinetic and isotherm studies showed the best uptake of perchlorate in the short time was by PiP-LDH, followed by DFP-LDH (20 min and 40 min, respectively). The calculated and experimental values of adsorption at the equilibrium state also concurred with the pseudo-second-order model. The prepared LDHs were mesoporous. The surface area of PiP-LDH provided more adsorption sites, rendering it more suitable for perchlorate adsorption compared with the other two LDHs. The model suggests Physico-chemical interactions behind the sorption of perchlorate by LDHs. The adsorption was more influenced by anions i.e, PO₄³⁻ > SO₄²⁻ > NO₃ than monovalent anions due to the increase in the charge radius values. The prepared LDHs could be of great benefit to the environmental remediation of wastewater bodies.     

杂多阴离子柱撑水滑石层柱相互作用的光电子能谱研究

本文用Ｘ－光电子能谱仪对二十二种同多和杂多阴离子柱撑水滑石层和柱中元素电子结合能的化学位移进行了研究。同时通过ＩＲ，ＸＲＤ的分析，对ＸＰＳ结果的讨论提供了一定的补充，探讨了同层不同柱，同性不同层的ＰＯＭ－ＬＤＨＳ的层柱相互作用机理。     

Cationic versus Anionic Pillared Layered Substrates: Comparison of the Pillaring Reactions and the Resulting Porosities

Cationic clays and Layered Double Hydroxides (LDHs) are both layeredion exchangers, in which a stable (micro)porosity can be induced via apillaring process. For the cationic clays, the [Zr]-pillaring of hectoritecreates a broad micropore distribution with the maximum at 1.42–2.12nm. The [Al]-equivalent exhibits a narrower distribution, with pores between0.71 and 1.06 nm being dominant. In case of the [Zr]-pillared form a surfacearea of 294 m²/g and a micropore volume of 0.118cm³/g have been obtained. The same reaction on the syntheticlaponite clay reveals a much higher surface area (606 m²/g)and porosity (µPV = 0.336 cm³/g). Forlaponite, extra pores are created in the supermicropore-small mesoporeregion due to the preferential edge-to-face and edge-to-edge stacking of itssmaller sized clay layers.For the pillaring of MgAl- and ZnAl-LDHs with polyoxometalates (POMs),using large organic anions for pre-swelling purposes forms the mostpromising method for the creation of stable pores. It avoids the formationof sidephases, and gives rise to medium(-high) µPVs. Charge density onthe layers forms the key factor, lowering it improves the porositycharacteristics significantly. [Fe(CN)₆]-MgAl-LDHs exhibitmore spectacular properties, with surface areas and µPVs exceedingthose of pillared hectorite. A variation in the charge density via theM ^II/M ^III ratio optimizes theporosity properties. A M ^II/M ^IIIratio of 3.33 results in a SA of 499 m²/g and a µPV of0.177 cc/g. For LDHs, both types of pillars create mainly small micropores,with a diameter smaller than 0.71 nm.     

硼酸根插层水滑石层间组成及取向结构的控制

以Mg0 .67Al0 .3 3 (OH) 2 (CO3 ) 0 .165·0 .62H2 OLDHs为前体 ,以水为分散介质 ,由离子交换法组装了硼酸根插层LDHs ,并用XRD ,FT IR ,TG DTA ,ICP ,11BMASNMR等手段对样品进行了分析和表征 .结果表明 ,通过控制离子交换时的pH ,可使硼酸根取代Mg Al CO3 LDHs前体层间的CO2 -3 ,且可控制离子交换程度及客体的取向 ,从而控制插层结构 .对硼酸根插层LDHs的结构进行研究发现 ,控制pH =4.5 ,层间阴离子主要是一硼酸根和离子平面与LDHs层板平行的三硼酸根 ,出于结构稳定的需要 ,CO2 -3 不能完全被置换 ;控制pH =3 .5 ,层间阴离子是一硼酸根和离子平面与LDHs层板垂直的三硼酸根     

γ-Al2O3表面原位合成Ni-Al-CO3LDHs研究

Ni-Al-CO₃LDHs/γ-Al₂O₃have been prepared using an in-situ synthesis technique. NH₃·H₂O was chosen as activation agent of Al on the γ-Al₂O₃surface as well as precipitant. Ni-Al-CO₃LDHs/γ-Al₂O₃was synthesized by controlling the reaction conditions such as temperature, concentration of Ni²⁺ and initial pH. The crystalline structure, chemical composition and porous structure were characterized by means of XRD, FT-IR, TG-DTA, ²⁷Al MAS-NMR and N₂ adsorption-desorption. The resulting sample of Ni-Al-CO₃LDHs/γ-Al₂O₃possesses higher specific area and narrower pore distribution, in which Ni-Al-CO₃LDHs are located on the surface of γ-Al₂O₃and share the same Al-O bonds with the γ-Al₂O₃lattice. Finally a possible structural model was proposed to account for the porous characters of Ni-Al-CO₃LDHs/γ-Al₂O₃.