Synthesis of carboline bases

A study has been made of the condensation of serotonin with aldehydes to give the corresponding -carboline derivatives. In most cases the reaction was run under biological conditions (pH 5. 4, 36). The following aldehydes were reacted: acetaldehyde, butyraldehyde, isobutyraldehyde, benzaldehyde, n-octaldehyde, and formaldehyde. The corresponding -carboline derivatives are obtained from the first 5 of these. The reaction with formaldehyde leads to complete resinification.     

A hierarchically zeolite Y for the N-heterocyclic compounds synthesis

High activity and selectivity of the hierarchical H-Ymmm zeolite in the synthesis of practically important pyridines (by interaction of C₂–C₄ alcohols with formaldehyde and ammonia, cyclocondensation of acetaldehyde and propanal with ammonia), dialkyl quinolines (by reaction of aniline with aldehydes) and alkyl dihydroquinolines (by reaction of aniline with ketones- acetone, acetophenone) were revealed in the research.The advantages of the micro-meso-macroporous H-Ymmm zeolite over the microporous H-Y zeolite in the synthesis of pyridines and quinolines were demonstrated. In the products formed by the reaction of ethanol with formaldehyde and ammonia, picolines (up to 63%) and lutidine are predominant in H-Ymmm, Pb-H-Ymmm and Fe-H-Ymmm zeolites. The interaction of n-propanol (n-butanol) with formaldehyde and ammonia in the presence of H-Ymmm zeolite with high selectivity produced 3,5-lutidine (up to 90%) or 3,5-diethylpyridine (85%). H-Ymmm zeolite makes it possible to prepare 2-methyl-5-ethylpyridine with 87% selectivity (reaction of acetaldehyde with ammonia) and 2-ethyl-3,5-dimethylpyridine with 58% selectivity (reaction of propanal with ammonia).The synthesis of dialkylquinolines and dialkyltetrahydroquinolines with a total selectivity of 65–73% by the interaction of aniline with C₃–C₅ aldehydes has been carried out. The dihydroquinoline derivatives with the selectivity of up to 70% have been synthesized by the reaction of aniline with ketones (acetone, acetophenone).     

Determination of higher molecular weight aliphatic aldehydes and ketones

The visible absorption spectra have been measured for the reaction products formed by aldehydes and ketones with p-nitrobenzenediazonium fluoborate in a phosphoric acid-2-methoxyethanol solvent medium. The absorption maxima for the reaction products of higher molecular weight aldehydes and ketones are much more intense than those formed by formaldehyde, acetaldehyde and acetone. This intensity effect has been used to analyze for propionaldehyde in mixtures also containing formaldehyde, acetaldehyde or acetone. The nature of the reaction products are considered.     

The Forgotten Carbonyl Reaction: Chloroacetylation and Bromoacetylation of Carbonyl Compounds

Halomethyl acetates ( 3 ) could be prepared from aliphatic, α,β‐unsaturated and aromatic aldehydes, as well as from alicyclic ketones with high yields in simple one‐pot reactions. Very often, the products didn't have to be purified and could directly be used for synthetic purposes after evaporation of the solvent. Obviously, the ‘bad reputation’ of the reaction in the literature stemed from the fact that the reactions didn't take place under the best conditions. Carbonyl compounds ( 1 ) and acyl halides ( 2 ) form equilibria which are completely on the side of the halomethyl acetates ( 3 ) at room temperature (starting with aliphatic and most aromatic aldehydes) and which can be strongly influenced by the reaction parameters. It is crucial to work at low temperature in apolar solvents and to remove (or deactivate) the catalyst before workup. Reactions may be realized with or without solvents. Side reactions were observed with formaldehyde and acetaldehyde but, with exception of formaldehyde, could be reduced close to zero (see Fig. 5). By‐products were essentially avoided if the reaction took place in apolar solvents and with a local excess of acetyl chloride. In many cases clean products were available which could directly be used for synthetic purposes. Halomethyl acetates ( 3 ) are bifunctional carbonyl derivatives with two different leaving groups, whose preparative advantages have been useful for the synthesis of various pentafulvenes, but were especially important for preparing unstable parent fulvenes and fulvalenes.     

On-column catalysis of hydratization equilibria during liquid chromatographic analysis of acetaldehyde and formaldehyde

Summary The aldehydes were separated by reversed phase chromatography on a polymer-based support. Acid catalysis on the column was needed to obtain sufficiently fast equilibrium between acetaldehyde and its hydrate. Deuterium labeled acetaldehyde (D₃) yielded complete separation from the nonlabeled compound, probably due to a difference in hydratization. Fluorescent products were obtained by reaction between the aldehydes and a mixture of ammonia and dimedone (5.5-dimethyl-1.3-cyclohexanedione). The fluorescence was detected at 460 nm after excitation at 390 nm. A reaction time of 42 seconds at 90°C in a knitted teflon capillary produced detection limits of 0.5 and 1 ng for acetaldehyde and formeldehyde, respectively. A method for preparation of a stable reagent with low background fluorescence is described.     

Mixed aldehyde condensations on copper glycinate

Glycine coordinated to cupric ions reacts in basic solution with a stoichiometric quantity of aldehydes to give β-hydroxyaminoacids. When the reaction contains a mixture of aldehydes, one of them being acetaldehyde, threonine is produced in the solution together with a variable amount of the bulkier substituted serine. An intermediate complex may be isolated which affords a larger proportion of substituted serines with predominance of the threo isomers. Acetaldehyde and benzaldehyde give a 66% yield of threo β-phenylserine.     

Outer‐sphere reduction of hexacyanoferrate(III) by enolizable and nonenolizable aldehydes in alkaline medium

Outer‐sphere reduction of hexacyanoferrate(III) by some enolizable/nonenolizable aldehydes (viz., aliphatic, heterocyclic, and aromatic aldehydes) in alkaline medium has been studied spectrophotometrically at λ_max = 420 nm. The reactions are first order each in [aldehyde] and [Fe(CN)₆^3?]. The rate increases with an increase in [OH^?] in the oxidation of aliphatic and heterocyclic aldehydes, whereas it is independent of [OH^?] in the reaction with aromatic aldehydes. The intervention of free radicals in the reaction mixture was carried out using both acrylonitrile and acrylamide scavenger in two different experiments. The kinetic results indicate that the oxidation of benzaldehyde in aqueous medium proceeds at a slower rate than the aliphatic aldehydes (other than formaldehyde) and furfural. The values of third‐order rate constant (k₃) at 308 K in the oxidations of some aliphatic aldehydes and furfural follow the order (CH₃)₂CH? > CH₃CH₂? > CH₃? > C₄H₃O? > H? . The rate constants correlate with Taft's σ* value, the reaction constant being negative (–9.8). The pseudo–first‐order rate constants in the oxidations of benzaldehyde and substituted benzaldehydes follow the order ? NO₂ > ? H > ? Cl > ? OCH₃. The Hammett plot is also linear with a ρ value (0.6488) for meta‐ and para‐substituted benzaldehydes. The kinetic isotope effect for benzaldehyde (k_H/k_D = 1.93 at 303 K) was obtained. The rate‐determining step is the outer‐sphere formation of Fe(CN)₆^4? and free radicals, which is followed by the rapid oxidation of free radicals by Fe(CN)₆^3? to give products. The kinetic data and hence thermodynamic parameters have been used to distinguish enolizable and nonenolizable aldehydes. An attempt has also been made to correlate kinetic data with hydration equilibrium constants of some aliphatic aldehydes. © 2012 Wiley Periodicals, Inc. Int J Chem Kinet 44: 494–505, 2012     

Kinetic scheme of homogeneous acid-catalyzed transformation of isopentenols

The reactions occurring in an equilibrium mixture of 3-methyl-1-buten-3-ol and 3-methyl-2-buten-1-ol in 24–49 % aqueous solutions of H₂SO₄ yield isoprene, 3-methyl-3-buten-1-ol, isobutylene, formaldehyde, 3-methylbutane-1,3-diol. Isobutylene is rapidly hydrated to give 2-methylpropan-2-ol. The presence of formaldehyde in the reaction mixture indicates that the transformations involve the reverse Prins reaction. On the basis of experimental and literature data, two most probable reaction schemes were suggested.Translated fromIzvestiya Akademii Nauk. Sertya Khimicheskaya, No. 5, pp. 867–870, May, 1995.     

Derivatizing assay for the determination of aldehydes using micellar electrokinetic chromatography

In this work, the use of a novel derivatization agent for the determination of aldehydes (in this particular case: formaldehyde, acetaldehyde, propionaldehyde, and valeraldehyde) using micellar electrokinetic chromatography is reported. The derivatization reaction is based on the reaction of aldehydes with benzhydrazide to form the corresponding derivates with maximum absorbance at 250 nm. The experimental conditions of the derivatization reaction as well of the separation were optimized. The adducts were separated with a +22 kV voltage at a temperature of 29°C. The adducts’ separation was performed in less than 14 min using as the running buffer a mixture containing 110 mmol/L of sodium dodecyl sulfate and 27 mmol/L of sodium tetraborate at pH 9.45. Samples were injected using hydrodynamic mode (50 mbar × 5 s). The calibration curves were linear up to 15.0 mg/L with r ² above 0.99. Intra and inter‐day precisions were in average 3 and 4%, respectively, and recoveries were in average of 95%. Limits of detection and quantification were around 0.5 and 1.5 mg/L, respectively. The developed method was successfully applied in the analysis of low molar weight aldehydes in yogurt and vinegar samples.     

Reactions of 3-hydroxy-1,2-dihydroquinazolin-4-ones with aldehydes

The reactions of 3-hydroxy-2-(2-hydroxyalkyl)- [or (2-hydroxyaryl)]-1,2-dihydro-quinazolin-4-ones with formaldehyde or acetaldehyde afford 1,3-oxazino[3,4-a]quinazolin-4-one derivatives. The reactions with other aldehydes RCHO and 3-hydroxy-2-R′-1,2-dihydroquinazolin-4-ones can give 3-hydroxy-2-R-1,2-dihydroquinazolin-4-ones, 2-substituted quinazolin-4-ones, or dianthranilide. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2523–2526, December, 1998.     

Organocatalyzed Michael Addition of Aldehydes to Nitro Alkenes – Generally Accepted Mechanism Revisited and Revised

The amine‐catalyzed enantioselective Michael addition of aldehydes to nitro alkenes (Scheme 1) is known to be acid‐catalyzed (Fig. 1). A mechanistic investigation of this reaction, catalyzed by diphenylprolinol trimethylsilyl ether is described. Of the 13 acids tested, 4‐NO₂? C₆H₄OH turned out to be the most effective additive, with which the amount of catalyst could be reduced to 1 mol‐% (Tables 2–5). Fast formation of an amino‐nitro‐cyclobutane 12 was discovered by in situ NMR analysis of a reaction mixture. Enamines, preformed from the prolinol ether and aldehydes (benzene/molecular sieves), and nitroolefins underwent a stoichiometric reaction to give single all‐trans‐isomers of cyclobutanes (Fig. 3) in a [2+2] cycloaddition. This reaction was shown, in one case, to be acid‐catalyzed (Fig. 4) and, in another case, to be thermally reversible (Fig. 5). Treatment of benzene solutions of the isolated amino‐nitro‐cyclobutanes with H₂O led to mixtures of 4‐nitro aldehydes (the products 7 of overall Michael addition) and enamines 13 derived thereof (Figs. 6–9). From the results obtained with specific examples, the following tentative, general conclusions are drawn for the mechanism of the reaction (Schemes 2 and 3): enamine and cyclobutane formation are fast, as compared to product formation; the zwitterionic primary product 5 of C,C‐bond formation is in equilibrium with the product of its collapse (the cyclobutane) and with its precursors (enamine and nitro alkene); when protonated at its nitronate anion moiety the zwitterion gives rise to an iminium ion 6 , which is hydrolyzed to the desired nitro aldehyde 7 or deprotonated to an enamine 13 . While the enantioselectivity of the reaction is generally very high (>97% ee), the diastereoselectivity depends upon the conditions, under which the reaction is carried out (Fig. 10 and Tables 1–5). Various acid‐catalyzed steps have been identified. The cyclobutanes 12 may be considered an off‐cycle ‘reservoir’ of catalyst, and the zwitterions 5 the ‘key players’ of the process (bottom part of Scheme 2 and Scheme 3).     

Vapor-phase Beckmann rearrangement of oxime molecules over H-Faujasite zeolite.

The Beckmann rearrangement (BR) plays an important role in a variety of industries. The mechanism of this reaction rearrangement of oximes with different molecular sizes, specifically, the oximes of formaldehyde (H₂C?NOH), Z‐acetaldehyde (CH₃HC?NOH), E‐acetaldehyde (CH₃HC?NOH) and acetone (CH₃)₂C?NOH, catalyzed by the Faujasite zeolite is investigated by both the quantum cluster and embedded cluster approaches at the B3LYP level of theory using the 6‐31G (d,p) basis set. To enhance the energetic properties, single point calculations are undertaken at MP2/6‐311G(d,p). The rearrangement step, using the bare cluster model, is the rate determining step of the entire reaction of these oxime molecules of which the energy barrier is between 50–70 kcal mol^?1. The more accurate embedded cluster model, in which the effect of the zeolitic framework is included, yields as the rate determining step, the formaldehyde oxime reaction rearrangement with an energy barrier of 50.4 kcal mol^?1. With the inclusion of the methyl substitution at the carbon‐end of formaldehyde oxime, the rate determining step of the reaction becomes the 1,2 H‐shift step for Z‐acetaldehyde oxime (30.5 kcal mol^?1) and acetone oxime (31.2 kcal mol^?1), while, in the E‐acetaldehyde oxime, the rate determining step is either the 1,2 H‐shift (26.2 kcal mol^?1) or the rearrangement step (26.6 kcal mol^?1). These results signify the important role that the effect of the zeolite framework plays in lowering the activation energy by stabilizing all of the ionic species in the process. It should, however, be noted that the sizeable turnover of a reaction catalyzed by the Brønsted acid site might be delayed by the quantitatively high desorption energy of the product and readsorption of the reactant at the active center.     

1,3,5,7-Tetramethyl-8-aminozide-difluoroboradiaza-s-indacene as a new fluorescent labeling reagent for the determination of aliphatic aldehydes in serum with high performance liquid chromatography

A BODIPY-based fluorescent derivatization reagent with a hydrazine moiety, 1,3,5,7-tetramethyl-8-aminozide-difluoroboradiaza-s-indacene (BODIPY-aminozide), has been designed for aldehyde labeling. An increased fluorescence quantum yield was observed from 0.38 to 0.94 in acetonitrile when it reacted with aldehydes. Twelve aliphatic aldehydes from formaldehyde to lauraldehyde were used to evaluate the analytical potential of this reagent by high performance liquid chromatography (HPLC) on C₁₈ column with fluorescence detection. The derivatization reaction of BODIPY-aminozide with aldehydes proceeded at 60 °C for 30 min to form stable corresponding BODIPY hydrazone derivatives in the presence of phosphoric acid as a catalyst. The maximum excitation (495 nm) and emission (505 nm) wavelengths were almost the same for all the aldehyde derivatives. A baseline separation of all the 12 aliphatic aldehydes (except formaldehyde and acetaldehyde) is achieved in 20 min with acetonitrile–tetrahydrofuran (THF)–water as mobile phase. The detection limits were obtained in the range from 0.43 to 0.69 nM (signal-to-noise = 3), which are better than or comparable with those obtained by the existing methods based on aldehyde labeling. This reagent has been applied to the precolumn derivatization followed with HPLC determination of trace aliphatic aldehydes in human serum samples without complex pretreatment or enrichment method.     

A General and Efficient Route for the Preparation of Phenyl-Substituted Vinyl Fluorides

α-Fluorobenzyl phosphonate (EtO)₂P(O)CFHPh ( 2 ) prepared from diethyl α-hydroxyphosphonate (EtO)₂P(O)CH(OH)Ph ( 1 ) and diethylaminosulfur trifluoride (DAST), reacts with bases such as butyllithium, tert-butyllithium, lithium bis(trimethylsilyl)amide, or lithium diisopropylamide at −78° in THF to give the phosphonate carbanion [(EtO)₂P(O)CFPh]⁻Li⁺ ( 3 ) which was detected by acylation with propionyl chloride or by addition of MeOD to the reaction mixture to give (EtO)₂P(O)CF(COEt)Ph ( 4 ) and (EtO)₂P(O)CFDPh ( 5 ), respectively. Addition of aldehydes or ketones to a THF solution of carbanion 3 led to moderate-to-good yields of phenyl-substituted vinyl fluorides RR′C=CFPh 6 . The stereoselectivity of the products PhCH=CFPh ( 6a ) and Ph(Me)C=CFPh ( 6i ) formed in the reaction was examined. The presence of hexamethylphosphoric triamide or N,N′-dimethylpropyleneurea as cosolvent in the preparation of 6a and 6i increased the (Z)-stereoselectivity. However, the presence of LiCl in THF did not alter the (E)/(Z)-ratio of the product.     

CuMgAlO_x复合氧化物催化甲醇乙醇Guerbet反应:M~(2+)/Al~(3+)比的影响

以类水滑石为前驱体,通过调控M~(2+)/Al~(3+)比制备了系列具有不同表面性质的MgAlO_x(MA)和CuMgAlO_x(CMA)催化剂,并分别应用于甲醛乙醛缩合反应(甲醇乙醇Guerbet反应的第二步反应)和甲醇乙醇Guerbet反应。采用NH_3/CO_2-TPD、XPS、H_2-TPR和H_2-TPD技术对催化剂表面酸碱性以及铜物种的性质进行了表征。结果表明,甲醇乙醇Guerbet反应性能与催化剂表面Cu~0比表面积和中强碱数目有关,提高Cu~0比表面积有利于甲醇乙醇脱氢生成甲醛和乙醛,增强中强碱数目能促进甲醛乙醛缩合反应。     

钾调变Mo/SBA-15催化剂用于乙烷选择氧化制乙醛

采用两步浸渍法制备钾改性的Mo/SBA-15 催化剂. 采用N₂吸附,X射线衍射（XRD）,透射电镜（TEM）,紫外-可见（UV-Vis）吸收光谱,拉曼（Raman）光谱,NH₃程序升温脱附（NH₃-TPD）,CO₂程序升温脱附（CO₂-TPD）,H₂程序升温还原（H₂-TPR）等手段表征催化剂的物理化学性质. 研究结果表明,在Mo_0.75/SBA-15 中添加K之后,有新物种钾钼酸盐生成,并且当K/Mo的摩尔比不同时,钼物种的存在状态也不同. 添加钾之后,催化剂的活性和总醛（甲醛、乙醛、丙烯醛）的选择性均有所提高,并且受钾的添加量影响. 在575 ℃时,在K_0.25-Mo_0.75/SBA-15催化剂上醛的收率可高达8.5%（摩尔分数）.     

Highly Efficient Synthesis of 1,3-Dioxanes via Prins Reaction in Brønsted-Acidic Imidazolium Ionic Liquid

The high-yielding synthesis of a wide variety of 1,3-dioxanes via the Prins reaction under mild conditions has been demonstrated using Brønsted-acidic imidazolium ionic liquid [bmim(SO₃H)][OTf] or bmimOTf. The use of ionic liquid makes this synthesis simple, convenient, cost-effective, and environmentally friendly. Furthermore, bmimOTf was conveniently separated from the products and can be easily recycled for the Prins reaction with excellent yields. This method works well with a variety of aliphatic aldehydes including formaldehyde, acetaldehyde, propionaldehyde, and cyclohexanecarboxaldehyde.

[Supplementary materials are available for this article. Go to the publisher's online edition of Synthetic Communications® for the following free supplemental resource(s): Full experimental and spectral details.]     

Studies with polyfunctionally substituted heteroaromatics: A facile route for the synthesis of polyfunctionally substituted N-aminopyridines, 1,2,4-triazolo[1,5-a]pyridines and isoquinolines

The reactions of formaldehyde and acetaldehyde with active methylene compounds, followed by reaction with cyanoacetic acid hydrazide 2, afforded N-aminopyridine-2-one derivatives 5a-f. In contrast, the reactions of cyanoacetic acid hydrazide 2 with aliphatic aldehydes and cyanothioacetamide afforded pyridinethione derivatives 11a-b. Also, the reactions of active methylene compounds with formaldehyde and cyanoacetamide afforded pyridin(1H)-2-one derivatives 12a-c. The reactions of 5b with aldehydes and ketones afforded compounds 13a, b, 14, and 15, respectively. The reactions of 5b with arylidinemalononitriles 16a,b afforded isoquinoline derivatives 19a,b. Compound 19b by hydrolysis gave the final product 20. Compound 20 could also be formed by hydrolysis of 5b to give 21, followed by the reaction with 16b. © 1997 John Wiley & Sons, Inc.     

Simple Lanthanide Amides [(Me3Si)2N]3Ln(μ-Cl)Li(THF)3 as Highly Efficient Catalysts for the Nitroaldol Reaction

This contribution is to report the application of simple lanthanide amides [(Me3Si)2N]3Ln(μ-Cl)Li(THF)3 exhibiting a high activity toward catalyzing Henry reaction of aromatic aldehydes with nitroalkanes to give β-nitroalcohols or β-nitroolefins with a very good chemoselectivity by controlling the reaction temperatures and by selecting aromatic aldehydes. It was found that this catalytic system was compatible with a wide range of substrates of aldehydes.     

Behaviour of aminoacids and aliphatic aldehydes in dipolar aprotic solvents: Formation of oxazolidinones—behaviour of aminoacids and aliphatic aldehydes in dipolar aprotic solvents

Reactions of aliphatic branched aldehydes with proline in dimethyl sulfoxide or acetonitrile solution afford oxazolidin-5-ones with high diastereoselection. Linear aldehydes afford aldolic/crotonic condensation products; with short reaction times, the presence of Oxazolidinones can be detected in the pmr spectra. Acyclic aminoacids and branched aldehydes yield a reaction mixture the pmr and ir spectra of which give evidence for iminic-oxazolidinone equilibria. The structure of (2R,5S)-2-trichloromethyl-1-aza-3-oxabiciclo-[3.3.0]octan-4-one has been confirmed by X-ray diffraction analysis.