Aluminosilicates with different pores structure in the synthesis of 2,2,4-trimethyl-1,2-dihydroquinoline and <Emphasis Type="Italic">N</Emphasis>-phenyl-2-propanimine

Physicochemical characteristics of microporous zeolites of various structural type (FAU, BEA, MTW), micro-meso-macroporous zeolite (H-Ymmm), and mesoporous aluminosilicate (ASM) were studied. Their catalytic activity in the reaction of aniline with acetone was examined. It was found that 2,2,4-trimethyl-1,2-dihydroquinoline was the main reaction product on the catalysts H-Ymmm and ASM (selectivity up to 68% at 100% conversion of aniline), while the reaction on zeolites with microporous structure mainly gave N-phenyl-2-propanimine (selectivity up to 91%).     

An Improved Liquid-Phase Synthesis of Simple Alkylpyridines

The synthesis of pyridines from mixtures of aldehydes or ketones NH₃ in the liquid phase has been reinvestigated, using continuous dosage of the carbonyl components to the reaction mixture. The main product from the reaction of acetaldehyde and formaldehyde is 3-methylpyridine ( 6 ), which is also the main product from the reaction of acrolein or a mixture of crotonaldehyde and formaldehyde under the same conditions. The reaction of other aldehydes with formaldehyde give 3,5-dialklypyridines, e.g. 10, 16 . Acetone reacts with either formaldehyde or acetaldehyde to give polysubstituted alkylpyridines. A mechanistic pathway is proposed which accounts for the formation of the observed products.     

Single-Pot Synthesis of Alkyl-Substituted Quinolines and Indoles via Photoinduced Oxidation of Primary Alcohols

Single-pot synthesis of alkyl-substituted quinolines and indoles has been performed via photoinduced oxidation of primary aliphatic alcohols (C₂–C₅) and condensation of the aldehydes (products of the alcohols oxidation) with aniline under the action of iron-containing catalysts and inorganic oxidants. The synthesis was the most efficient in the presence of FeCl₃·6H₂O as catalyst and 10% aqueous solution of NaOCl as oxidant with irradiation by Hg lamp. The synthesis mechanism through photoinduced oxidation of primary aliphatic alcohol has been suggested.     

Determination of higher molecular weight aliphatic aldehydes and ketones

The visible absorption spectra have been measured for the reaction products formed by aldehydes and ketones with p-nitrobenzenediazonium fluoborate in a phosphoric acid-2-methoxyethanol solvent medium. The absorption maxima for the reaction products of higher molecular weight aldehydes and ketones are much more intense than those formed by formaldehyde, acetaldehyde and acetone. This intensity effect has been used to analyze for propionaldehyde in mixtures also containing formaldehyde, acetaldehyde or acetone. The nature of the reaction products are considered.     

Chichibabin pyridinium synthesis

Chichibabin pyridine synthesis involves the reaction of three aldehydes and ammonia to form 2,3,5-trisubstituted pyridines. This study examined the synthesis of tetrasubstituted pyridinium from aldehydes and an amine hydrochloride in the presence/absence of Pr(OTf)₃. Important insights into the reaction mechanisms of Chichibabin pyridinium synthesis were proposed through the investigation of reaction intermediates along with quantitative GC–MS analysis.     

Polarographische Bestimmung von Spuren von Carbonylverbindungen in organischen Lösungsmitteln

Traces of formaldehyde, acetaldehyde and acetone in organic solvents are determined polarographically as semicarbazones. Solvents miscible with water are measured directly in aqueous buffer solution of semicarbazide, while from those nonmiscible with water the carbonyl compounds are first extracted with a solution of semicarbazide. The polarography of semicarbazones as an analytical method is considerably more sensitive than the direct polarography of aldehydes in a neutral or alkaline medium: in 1 ml samples of solvents, formaldehyde, acetaldehyde and acetone can be determined in concentrations of about 10^?4%. The method also permits the determination of formaldehyde, acetaldehyde and acetone simultaneously.     

Polymer-mediated extraction of the fluorescent compounds derived by Hantzsch reaction with dimedone for the sensitive determination of aliphatic aldehydes in air

An extraction method based on the thermo-responsive precipitation of a water-soluble polymer, poly(N-isopropylacrylamide) [PNIPAAm], was applied to the concentration of dimedone (5,5-dimethylcycrohexane-1,3-dion) derivatives for the highly sensitive determination of aldehydes in air. Aliphatic aldehydes including formaldehyde, acetaldehyde, propanal, 1-butanal, 1-heptanal, and 1-hexanal in air were well solubilized into the aqueous solution of dimedone and ammonium acetate by mixing the solution and air sample in a polyvinyl fluoride bag. Fluorescent derivatives of aldehydes that had formed by the Hantzsch reaction with dimedone were concentrated by polymer-mediated extraction. The recoveries of the fluorescent compounds increased with increasing the carbon number of aldehyde and were more than 80% for the derivatives from aldehydes having more than three carbon atoms under the optimal conditions. Microgram per m3 (sub-ppb) levels of the aliphatic aldehydes, propanal, 1-butanal, 1-heptanal, and 1-hexanal, in ambient air were successfully determined by HPLC separation with fluorometric detection. The sampling volume and time required were only 1l and 20 s, respectively.     

Zinc cation supported on carrageenan magnetic nanoparticles: A novel,green and efficient catalytic system for one‐pot three‐component synthesis of quinoline derivatives

This is the first report of supporting zinc cation on ƛ‐carrageenan/Fe₃O₄ magnetic nanoparticles. The structural and magnetic properties of this hybrid (Zn²⁺/ƛ‐carrageenan/Fe₃O₄ nanoparticles) were identified using various techniques. This green and efficient catalytic system was applied in the synthesis of biologically important quinolines. The products were obtained in good to high yields (52–95%) from a one‐pot reaction procedure involving aromatic aldehydes, enolizable aldehydes and aniline derivatives. Our method has many advantages such as mild reaction conditions, easy work‐up, use of a reusable magnetic catalyst and high yields of products.     

Synthesis of quinolines via Rh(III)-catalyzed oxidative annulation of pyridines

Selective synthesis of quinolines has been achieved via oxidative annulation of functionalized pyridines with two alkyne molecules under Rh(III)-catalyzed cascade C-H activation of pyridines using Cu(OAc)(2) as an oxidant. The selectivity of this reaction is oxidant-dependent, particularly on the anion of the oxidant.     

Oxidant Effect of H2O2 for the Syntheses of Quinoline Derivatives via One-Pot Reaction of Aniline and Aldehyde

A convenient one-pot method for the synthesis of substituted quinolines via the reaction of aniline and aldehyde in the presence of a Lewis acid (AlCl₃) and an oxidant (H₂O₂) has been developed. Hydrogen peroxide was found to promote the reaction by its function as a hydrogen hunter, hindering the formation of by-product N-alkylaniline. The effect of the oxidant on the yield and selectivity was studied. When the molar ratio of aniline, n-butyraldehyde, and H₂O₂ was 1:3:0.5 at 25 °C, the yield of 3-ethyl-2-propylquinoline was improved from 64% (reaction without H₂O₂) to 84% (with H₂O₂), and the quinoline selectivity was improved to almost 100%. Moreover, the reaction time was obviously reduced. The substituent effect was also investigated in this work.     

Determination of aldehydes in fish by high-performance liquid chromatography

A new analytical method to determine trace volatile aldehydes isolated from the headspace of fish meat at room temperature by high-performance liquid chromatography (HPLC) in the form of 2,4-dinitrophenylhydrazone (DNPHo) derivatives has been developed. Aliquots (50 g) of the fish purée were introduced into a 500-mL glass recipient and were purged with N2 for 40 min through two SEP-PAK C18 cartridges (connected in series) coated with an acid solution of 2,4-dinitrophenylhydrazine. The cartridges were then eluted with acetonitrile (2 mL) and the 2,4-DNPHo formed was quantitated by HPLC-UV analysis using a Zorbax C18 column. The isolated compounds from the dynamic headspace sampling of four kinds of fish species were saturated aldehydes, formaldehyde, acetaldehyde, propanal, butanal, pentanal, and hexanal. Under optimized conditions the detection limits of the HPLC method were in the range of 0.75 nmol/g (formaldehyde) to 2.19 nmol/g (hexanal). The calibration curves were linear in the concentration range from 1.3 nmol/mL to 12.5 nmol/mL. Propanal and acetaldehyde were the major carbonyl compounds identified (ranging from 3.9 nmol/g and 10 nmol/g). This study has revealed the widespread occurrence of formaldehyde, acetaldehyde, propanal, butanal, pentanal, and hexanal in fish meat.     

Vapor-phase Beckmann rearrangement of oxime molecules over H-Faujasite zeolite.

The Beckmann rearrangement (BR) plays an important role in a variety of industries. The mechanism of this reaction rearrangement of oximes with different molecular sizes, specifically, the oximes of formaldehyde (H₂C?NOH), Z‐acetaldehyde (CH₃HC?NOH), E‐acetaldehyde (CH₃HC?NOH) and acetone (CH₃)₂C?NOH, catalyzed by the Faujasite zeolite is investigated by both the quantum cluster and embedded cluster approaches at the B3LYP level of theory using the 6‐31G (d,p) basis set. To enhance the energetic properties, single point calculations are undertaken at MP2/6‐311G(d,p). The rearrangement step, using the bare cluster model, is the rate determining step of the entire reaction of these oxime molecules of which the energy barrier is between 50–70 kcal mol^?1. The more accurate embedded cluster model, in which the effect of the zeolitic framework is included, yields as the rate determining step, the formaldehyde oxime reaction rearrangement with an energy barrier of 50.4 kcal mol^?1. With the inclusion of the methyl substitution at the carbon‐end of formaldehyde oxime, the rate determining step of the reaction becomes the 1,2 H‐shift step for Z‐acetaldehyde oxime (30.5 kcal mol^?1) and acetone oxime (31.2 kcal mol^?1), while, in the E‐acetaldehyde oxime, the rate determining step is either the 1,2 H‐shift (26.2 kcal mol^?1) or the rearrangement step (26.6 kcal mol^?1). These results signify the important role that the effect of the zeolite framework plays in lowering the activation energy by stabilizing all of the ionic species in the process. It should, however, be noted that the sizeable turnover of a reaction catalyzed by the Brønsted acid site might be delayed by the quantitatively high desorption energy of the product and readsorption of the reactant at the active center.     

Possibilities of Microporous and Hierarchical MFI Zeolites in the Synthesis of Nitrogen Heterocyclic Compounds

Kinetics and Catalysis - The catalytic properties of a microporous H-ZSM-5 zeolite and a granular hierarchical H-ZSM-5h zeolite in the synthesis of basic pyridines and quinolines have been studied....     

Catalytic properties of Fe ion-exchanged mordenite toward the ethanol transformation: influence of the methods of preparation

The transformation of ethanol on Fe ion-exchanged mordenite was compared in the temperature range of 200–400 °C for samples prepared in the solution and solid states. Ethane and methane were found as rather major products, compared to acetaldehyde and acetone. Diethyl ether was also detected as a dehydration product. The conversion was found to increase monotonically (to 96%) with increasing the Fe content (to 100%) and reaction temperature to 400 °C. The selectivity towards acetaldehyde and acetone was found maximum at the temperature 300 °C. Decrease in the catalyst Brönsted acidity due to ion-exchange in solution caused a marked increase in the selectivity toward acetaldehyde at 300 °C. At variance, Fe ion-exchanged in the solid state resulted in a higher Brönsted acidity catalyst of higher selectivity to acetone. The solid state exchanged catalyst formed more coke at 400 °C. The higher zeolite acidity catalyzes the ethane propagation into the coke precursors. The extraordinary formation of ethane as a dominant transformation product (in the absence of H₂ gas supply) is explained mainly to the O-abstracting affinity of the Fe³⁺ ion. Methane may be formed as a result of decomposition reaction at high temperatures. Mössbauer and XRD were applied for characterizing different Fe species involved as active sites in the reaction. Coke deposited on the catalysts was measured by TGA. Other helpful information was obtained from BET of N₂-adsorption and FT–IR of NH₃-adsorption. Fair correlation between the active sites responsible for formation of the various products and the zeolite acidity is discussed along with a possible role for the surface area and pore structure in the reaction activity and selectivity.     

Determination of short-chain carbonyl compounds in drinking water matrices by bar adsorptive micro-extraction (BAμE) with in situ derivatization

In this contribution, bar adsorptive micro-extraction using polystyrene-divinylbenzene sorbent phase and in situ derivatization with pentafluorophenyl hydrazine, followed by liquid desorption and high-performance liquid chromatography-diode array detection (BAμE(PS-DVB)(PFPH in situ)-LD/HPLC-DAD), was developed for the determination of six short-chain carbonyl compounds (formaldehyde, acetaldehyde, propanal, acetone, butanone, and 2-hexenal) in drinking water matrices. PFPH presented very good specificity as an in situ derivatization agent for short-chain ketones and aldehydes in aqueous media, allowing the formation of adducts with remarkable sensitivity, selectivity and the absence of photodegradation. Assays performed on 30-mL water samples spiked at the 25.0 μg L(-1) levels, under optimized experimental conditions, yielded recoveries ranging from 47.4 ± 3.8% to 85.2 ± 3.8%, in which the PS-DVB proved to be a convenient sorbent phase. The analytical performance showed good accuracy, suitable precision (RSD < 13.0%), detection limits in between 47 and 132 ng L(-1) and remarkable linear dynamic ranges (r(2) > 0.9907) from 1.0 to 80.0 μg L(-1). By using the standard addition methodology, the application of the present method to drinking water samples treated with different disinfectants, namely, chloride, ozone and both, allowed very good performances to monitor these priority compounds at the trace level. The proposed methodology proved to be a feasible alternative for polar compound analysis, showing to be easy to implement, reliable, sensitive and requiring a low sample volume to monitor short-chain aldehydes and ketones in drinking water matrices.     

Highly selective synthesis of 3-methylindole from glycerol and aniline over Cu/NaY modified by K2O

The vapor-phase synthesis of 3-methylindole from glycerol and aniline over Cu/NaY modified by K2O was investigated. The catalysts were characterized by X-ray diffraction （XRD） and the temperature- programmed desorption of ammonia （NH3-TPD）. The effect of the reaction temperature on the activity and selectivity of Cu]NaY-K2O catalyst was also investigated. The results indicated that the addition of K2O to Cu/NaY increased the selectivity of the catalyst remarkably because the amount of middle-strong acid sites decreased clearly. The decrease of the reaction temperature was beneficial for the increase of 3- methylindole selectivity. Over Cu/NaY-K2O, the selectivity of 3-methylindole reached 75% and the yield of the target product was up to 47% at 220 ℃. A probable catalytic mechanism for the synthesis of 3- methylindole from glycerol and aniline was proposed.     

Synthesis of Quinolines via a Metal‐Catalyzed Dehydrogenative N‐Heterocyclization

Efficient ruthenium‐, rhodium‐, palladium‐, copper‐ and iridium‐catalysed methodologies have been recently developed for the synthesis of quinolines by the reaction of 2‐aminobenzyl alcohols with carbonyl compounds (aldehydes and ketones) or the related alcohols. The reaction is assumed to proceed via a sequence involving initial metal‐catalysed oxidation of 2‐aminobenzyl alcohols to the related 2‐aminobenzaldehydes, followed by cross aldol reaction with a carbonyl compound under basic conditions to afford α,β‐unsaturated carbonyl compounds. These aldehydes or ketones can be also generated in situ via dehydrogenation of the related primary and secondary alcohols. In the final step cyclodehydration of the α,β‐unsaturated carbonyl compound intermediates gives quinolines. Good yields of quinolines were also obtained by reacting 2‐nitrobenzyl alcohols and secondary alcohols in the presence of a ruthenium catalyst. Finally, aniline derivatives afforded also a useful access to quinolines by the reaction with 1,3‐propanediol or 3‐amino‐1‐propanol, or in a three‐component reaction with benzyl alcohol and aliphatic alcohols.     

Measurements of Propanal Ignition Delay Times and Species Time Histories Using Shock Tube and Laser Absorption

Propanal is an aldehyde intermediate formed during the hydrocarbon combustion process. Potentially, the use of oxygenated biofuels reduces greenhouse gas emissions; however, it also results in increased toxic aldehyde by‐products, mainly formaldehyde, acetaldehyde, acrolein, and propanal. These aldehydes are carcinogenic, and therefore it is important to understand their formation and destruction pathways in combustion systems. In this work, ignition delay times were measured behind reflected shock waves for stoichiometric (Φ = 1) mixtures of propanal (CH₃CH₂CHO) and oxygen (O₂) in argon bath gas at temperatures of 1129 K < T < 1696 K and pressures around 1 and 6 atm. Measurements were conducted using the kinetics shock tube facility at the University of Central Florida. Current results were compared to available data in the literature as well as to the predictions of three propanal combustion kinetic models: Politecnico di Milano (POLIMI), National University of Ireland at Galway, and McGill mechanisms. In addition, a continuous wave‐distributed feedback interband cascade laser centered at 3403.4 nm was used for measuring methane (CH₄) and propanal time histories behind the reflected shock waves during propanal pyrolysis. Concentration time histories were obtained at temperatures between 1192 and 1388 K near 1 atm. Sensitivity analysis was carried for both ignition delay time and pyrolysis measurements to reveal the important reactions that were crucial to predicting the current experimental results. Adjustments to the POLIMI mechanism were adopted to better match the experimental data. Further research was suggested for the H abstraction reaction rates of propanal. In addition to extending the temperature and pressure region of literature ignition delay times, we provide the first high‐temperature species concentration time histories during propanal pyrolysis.     

室温下Cu掺杂的ZnO纳米粉末催化多组分一锅法合成完全取代的茚并[1,2-b]吡啶(英文)

Cu doped ZnO nanocrystalline powder(10 mol%) has been found to be an efficient catalyst for the one‐pot multi‐component synthesis of fully substituted new indeno[1,2‐b]pyridines through a com-bination of 1,3‐indandione, propiophenone or acetophenone derivatives, aromatic aldehydes, and ammonium acetate in ethanol/H2 O at room temperature. The methodology is mild, efficient and high to excellent yielding.     

A theoretical investigation of the plausibility of reactions between ammonia and carbonyl species (formaldehyde, acetaldehyde, and acetone) in interstellar ice analogs at ultracold temperatures

We have reexamined the reaction between formaldehyde and ammonia, which was previously studied by us and other workers in modestly sized cluster calculations. Larger model systems with up to 12H(2)O were employed, and reactions of two more carbonyl species, acetaldehyde and acetone, were also carried out. Calculations were performed at the B3LYP/6-31+G** level with bulk solvent effects treated with a polarizable continuum model; limited MP2/6-31+G** calculations were also performed. We found that while the barrier for the concerted proton relay mechanism described in previous work remains modest, it is still prohibitively high for the reaction to occur under the ultracold conditions that prevail in dense interstellar clouds. However, a new pathway emerged in more realistic clusters that involves at least one barrierless step for two of the carbonyl species considered here: ammonia reacts with formaldehyde and acetaldehyde to form a partial charge transfer species in small clusters (4H(2)O) and a protonated hydroxyamino intermediate species in large clusters (9H(2)O, 12H(2)O); modest barriers that decrease sharply with cluster size are found for the analogous processes for the acetone-NH(3) reaction. Furthermore, if a second ammonia replaces one of the water molecules in calculations in the 9H(2)O clusters, deprotonation can occur to yield the same neutral hydroxyamino species that is formed via the original concerted proton relay mechanism. In at least one position, deprotonation is barrierless when zero-point energy is included. In addition to describing the structures and energetics of the reactions between formaldehyde, acetaldehyde, and acetone with ammonia, we report spectroscopic predictions of the observable vibrational features that are expected to be present in ice mixtures of different composition.