甲烷部分氧化制合成气:载体及助剂对Ni系催化剂活性的影响

 采用浸渍法制备了Ni系催化剂,并用程序升温还原和X射线衍射技术对催化剂进行了表征,用固定床微反装置考察了催化剂的催化活性．活性考察结果表明,在Ni担载量为8％的Ni／γ－Al2O3,Ni／δ－Al2O3,Ni／θ－Al2O3和Ni／α－Al2O3四种催化剂上,甲烷部分氧化制合成气反应的活性及产物选择性存在着明显的差异．在770℃下,甲烷转化率及CO和H2的选择性按Ni／γ－Al2O3＜Ni／δ－Al2O3＜Ni／θ－Al2O3≈Ni／α－Al2O3顺序排列．在相同的条件下,加入适量的CeO2助剂后,Ni／γ－Al2O3和Ni／δ－Al2O3上的反应活性和选择性显著提高,而Ni／θ－Al2O3和Ni／α－Al2O3上的活性和选择性却变化不大．同时,表征结果显示,Ni易与γ－Al2O3形成镍铝尖晶石NiAl2O4,加入CeO2助剂能有效地抑制该组分的生成,而Ni／α－Al2O3样品中未发现NiAl2O4．因此,不同Ni／Al2O3催化剂体系上的反应活性及选择性的差异可归结为不同结构Al2O3载体的性质不同,及CeO2对抑制镍铝尖晶石生成的效果不同．     

La2O3对Ni/γ-Al2O3甲烷化催化剂的助催化作用

我国将稀土作为助剂引入镍基甲烷化催化剂,大大提高了催化剂的活性和热稳定性,并已投入工业应用［1－3］．稀土对不同镍催化剂反应性能及其作用机理的研究已有一些报导［3－7］．谢有畅等观察到镍负载在经单层La2O3改性的γ－Al2O3表面,其晶粒要比没有La2O3时小得多．Rotgerink等认为添加La后反应速率的增加不只是由于几何效应,而是La对甲烷化本身有促进作用,单位镍表面的活性是随La含量不同而改变的,活性增加的同时表观活化能也增加［5］．作为助剂的La2O3在氢还原和反应过程中的变化及其作用的研究和讨论较少,目前一般认为添…     

CoCr2O4型催化剂上二氯甲烷的高效催化燃烧

采用共沉淀法在不同焙烧温度下制备一系列尖晶石型CoCr2 O4催化剂并测试其对CH2 Cl2催化燃烧性能．制备的催化剂都具有高的反应活性,并发现其性能受到表面酸性和氧化还原性的协同作用．经600℃焙烧的CoCr2 O4-6催化剂因其具有较高的表面酸量（0．46 mmol·gcat－1）和较高表面吸附氧浓度（Oads／Olat＝0．55）,因此活性最佳,其T50为201℃,T90为278℃．由XRD等结构表征可知该催化剂含CoCr2 O4和 Cr2 O3两相,但CoCr2 O4尖晶石是该催化剂的主要活性组分．     

Cu3/2PMo12O40改性骨架镍催化剂上羰基和碳-碳双键的加氢反应

 研究了Cu3／2PMo12O40表面改性的骨架镍催化剂上含羰基化合物（正丁醛、异丁醛、丙酮、丁酮和环己酮）及含碳－碳双键化合物（苯、糠醇和1－辛烯）的加氢反应．结果表明，随着骨架镍催化剂上Cu3／2PMo12O40附着量的增加，含羰基化合物的加氢反应速率上升，而含碳－碳双键化合物的加氢反应速率下降．与未改性的骨架镍催化剂相比，当骨架镍催化剂上Cu3／2PMo12O40附着量为6．3％时，羰基的加氢活性提高2倍以上，碳－碳双键的加氢活性下降30％以上．计算了各种化合物在催化剂上的表观活化能．结果表明，Cu3／2PMo12O40表面改性的骨架镍催化剂上，羰基加氢反应的表观活化能降低，而碳－碳双键加氢反应的表现活化能升高．从动力学角度讨论了Cu3／2PMo12O40对骨架镍催化剂的影响．用XPS对骨架镍表面的Cu3／2PMo12O40进行了研究，发现杂多酸盐的Keggin型结构已被破坏，Cu3／2PMo12O40分子中的Cu2＋被还原为Cu0，而Mo6＋被部分还原为Mo5＋和Mo4＋；Cu2＋和Mo6＋价态的变化是由骨架镍表面吸附的活泼氢所引起的．羰基加氢选择性的提高是Cu0和混合价态Mo共同作用的结果．     

CeO2-ZrO2复合氧化物对金属蜂窝整体催化剂性能的影响

 用浸渍法制备了不同比例的CeO2－ZrO2复合氧化物，并用XRD，H2－TPR和BET等研究了复合氧化物的晶相、还原性能及热稳定性．结果表明，所制备的CeO2－ZrO2复合氧化物形成了固溶体，Ce0．6Zr0．4O2比Ce0．90Zr0．10O2更容易被H2还原；1100℃老化后，晶胞参数无明显变化，比表面积仍有11．8m2／g．模拟二冲程摩托车尾气组成，对用贵金属Pt，Pd，Rh与CeO2及CeO2－ZrO2固溶体所制备的催化剂进行了活性评价．结果显示，1100℃老化后，催化剂仍具有很高的氧化活性．在贫氧区，Pt－Pd－Rh／Ce0．6Zr0．4O2－Al2O3对碳氢化合物氧化的催化活性则有一定的优势，是一种具有较高热稳定性的催化剂．     

贵金属对钴基催化剂上肉桂醛选择加氢反应的影响

 研究了贵金属改性的Co／γ－Al2O3催化剂上的肉桂醛选择加氢反应．结果表明，通过Pt，Pd和Ru贵金属改性，提高了催化剂的活性，但只有Pt改性的催化剂具有较高的选择性．w（Pt）＜0．5％时，催化剂的活性随着Pt含量的增加呈直线升高，当w（Pt）＝0．5％时，催化剂活性可提高近5倍，但催化剂的选择性变化很小．XRD结果表明，催化剂经还原后，γ－Al2O3上的钴主要为α－Co0．TPR结果表明，Pt的加入提高了Co3O4的还原性能，且Pt含量越高，Co3O4的还原温度越低．XPS结果表明，Pt改性的催化剂样品，其Co3O4大部分被还原为Co0．由于Pt与Co具有协同效应，故Pt改性的Co／γ－Al2O3催化剂既具有较高的活性，又具有很高的选择性．     

液化石油气水蒸气重整镍催化剂新型载体研究

以共沉淀法合成了硅铝系载体（AS和SA），并采用改性天然高铝石为原料合成了矿物质载体（MC-1和MC-2）,采用浸渍法合成了镍负载型催化剂。用常压固定床管式反应器，考察了液化石油气水蒸气重整反应活性，通过XRD、物理吸附等手段对催化剂进行了表征。结果表明，以MC-1、MC-2和SA、AS为载体的催化剂的水蒸气重整活性明显高于目前普遍使用的Ni/α-Al2O3催化剂。以SA为载体，负载5%镍的催化剂具有最好的水蒸气重整活性。在750 ℃，水碳比为2.0的条件下转化率达100％，C1选择性达94.46％。XRD分析结果表明1 300 ℃焙烧后的SA载体中存在α-Al2O3晶型和莫来石结构。硅、铝添加次序对水蒸气重整活性影响较大，硅-铝添加次序的催化剂样品的活性高于铝-硅添加次序的样品，C1选择性提高12.7％。     

甲烷部分氧化反应的镧改性Ni／γ-Al2O3催化剂研究

采用Na2CO3-NaOH为沉淀剂共沉淀制备La改性的镍基氧化铝催化剂，对甲烷部分氧化反应表现出高的活性和选择性。La的加入有效地抑制了大颗粒的NiAl2O3的形成，保持了相当高比例的活性镍组分，提高了催化剂的催化活性；而且加入La可以抑制氢氧化铝或氧化铝的物相转变，提高载体稳定性。活性测试结果表明共沉淀制备的20％镍含量的800℃焙烧La改性镍基氧化铝催化剂在800℃反应温度下XCH4，Sco和SH2分别达到100％，95．95％，99．87％，且催化剂在15h内活性几乎没有下降，显示了很好的催化性能和稳定性。通过对不同温度还原的催化剂的活性测试和TPR表征，得出无定型NiAl2O。还原出的Ni^0是甲烷部分氧化反应的主要活性组分。     

负载型无铬超细铁基变换催化剂的制备和催化性能

 以镁铝尖晶石为载体，以过渡金属氧化物为助剂，用吸附γ－Fe2O3胶体法制备了负载型无铬铁基变换催化剂．TEM，XRD，BET和活性测试结果表明，采用胶体负载法制备的变换催化剂，其活性组分Fe3O4以分立的超细微颗粒分布在镁铝尖晶石载体表面上，颗粒之间存在一定的间隔．过渡金属氧化物NiO或V2O5能够进入Fe3O4晶格形成固溶体，起到代替氧化铬的作用，提高催化活性．负载型催化剂FeNi／MgAl2O4（m（NiO）／m（Fe2O3）＝3％）在汽／气比为1和空速为2000h－1的反应条件下，CO转化率在400和350℃时分别为95％和80％；在高空速和低汽／气比条件下也具有很好的催化性能．稳定性实验结果表明，该催化剂 具有良好的热稳定性和一定的抗硫能力．与非负载型催化剂相比，负载型催化剂具有更为优越的催化性能．     

助剂镍/钴对磷化钨催化剂加氢精制性能的影响

在共浸渍法制备磷化钨／γ-Al2O3催化剂基础上，分别加人1％、3％、5％、7％和9％(占活性组分比例)的助剂镍或钴，制得负载30％含助剂镍／钴磷化钨／γ-Al2O3系列催化剂，考察了助剂及其加人比例对催化剂加氢脱硫和加氢脱氮性能的影响．结果表明，加人适当比例的助剂镍或钴，有利于提高磷化钨／γ-Al2O3催化剂的加氢脱硫活性，当助剂含量分别为5％镍或7％钴时，催化剂的噻吩加氢脱硫率最高；助剂镍对磷化钨／γ-Al2O3催化剂的加氢脱氮反应不利，而加人适当比例助剂钴有利于提高催化剂加氢脱氮活性，当助剂钴含量为5％时，催化剂吡啶加氢脱氮率最高．温度对磷化钨／γ-Al2O3催化剂加氢精制性能有一定影响，高温有利于加氢脱硫反应，低温有利于加氢脱氮反应．     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.