选择性富集分离虎杖中白藜芦醇苷的分子印迹聚合物的制备及分子识别性能研究

以白藜芦醇苷(POL)为模板分子,分别以丙烯酰胺(AM)、4-乙烯基吡啶(4-VP)、甲基丙烯酸羟乙酯(HEMA)、甲基丙烯酸(MAA)为功能单体,二甲基丙烯酸乙二醇酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用本体聚合法制备白藜芦醇苷分子印迹聚合物。采用静态平衡结合实验研究了印迹聚合物对模板分子及不同底物的识别性能。结果表明,以丙烯酰胺为功能单体的印迹聚合物(MIP1)对模板分子的识别性能最好,其次是以4-VP为功能单体的聚合物(MIP2),以HEMA为功能单体的聚合物(MIP3)以及以MAA为功能单体的聚合物(MIP4)的分子识别性能较差。表明功能单体与模板分子之间相互作用的强弱对MIP的识别能力有较大的影响。静态平衡结合法以及Scatchard分析法表明,MIP1对模板分子呈现较好的结合能力和选择性,该印迹聚合物中形成了2类不同的结合位点,离解常数分别为7.43×10-5、3.70×10-3mol/L。将MIP1用于虎杖提取物中POL的固相萃取分离,效果良好。     

对羟基苯甲酸、水杨酸分子印迹聚合物分子识别性质的 研究

以对羟基苯甲酸(4-HBA)为模板分子,4-乙烯吡啶(4-Vpy)为功能单体,制备得到了4-HBA分子印迹聚合物P(4-HBA),研究了该聚合物的分子识别机理,并与在同样条件下制备的水杨酸(SA)分子印迹聚合物P(SA)进行了分子识别能力的比较。结果表明：P(SA)比P(4-HBA)具有更好的分子识别能力。这是由于SA的酸性较4-HBA强,因此与碱性功能单体4-Vpy之间的静电作用更强,从而得到的复合物更稳定。本实验结果证明：功能单体与模板分子形成稳定的复合物是得到分子识别能力高的模板聚合物的前提条件。本文将有助于对分子印迹的过程以及分子印迹聚合物分子识别机理的进一步理解,并且对于根据模板分子的性质预测MIP的分子识别能力也将具有一定的指导意义。     

胆酸印迹聚合物的制备及在含水介质中的结合性能

为了在含水介质中进行有效印迹,本研究中以双甲基丙烯酰-β-环糊精（BMA-β-CD）和2-(二乙基胺基)乙基甲基丙烯酸酯(DEAEM)为功能单体制备了胆酸印迹聚合物MIP1,并用平衡结合实验研究了MIP1在含水介质中对模板分子的识别能力。结果表明,MIP1比单独以BMA-β-CD或DEAEM为功能单体制备的印迹聚合物MIP2和MIP3,显示出对模板分子更好的选择性结合能力。MIP1的特异性吸附量ΔCP为38.81μmol/g,印迹因子IF为2.46。研究表明,在含水介质中,利用模板分子与功能单体之间的疏水作用和离子作用是提高印迹聚合物分子识别能力的关键。研究还表明,在识别过程中,疏水作用在驱动分子进入印迹孔穴时起重要作用。     

异戊巴比妥分子印迹聚合物的合成和识别性能研究

以异戊巴比妥为模板,分别以丙烯酰胺和甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,偶氮二异丁腈为引发剂,用本体聚合法制备了分子印迹聚合物(molecularly imprinted polymer,MIP)。考察了以不同功能单体合成的MIP对模板分子和结构类似物的识别能力和选择性。表明以丙烯酰胺为功能单体合成得到的MIP比甲基丙烯酸为单体的聚合物具有更好的再识别性和选择性,前者对异戊巴比妥的饱和吸附量可达到28．58μmol／g．为理论吸附量的40．9％。     

基于N,O-双异丁烯酰乙醇胺为交联功能单体的苯磺隆分子印迹聚合物膜的制备及其性能研究

以苯磺隆为模板分子, N,O-双异丁烯酰乙醇胺为交联功能单体, 在尼龙-6膜上通过紫外光照引发合成了分子印迹聚合物膜, 并用扫描电镜对其表面形态进行了表征. 用紫外分光光谱法研究了模板分子与交联功能单体之间的相互作用. 印迹因子的测定和底物竞争渗透实验结果表明, 分子印迹聚合物膜对模板分子苯磺隆具有较高的选择性, 而非分子印迹聚合物膜没有选择性.     

青霉素V钾分子印迹聚合物的制备及性能研究

以α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,β-内酰胺类抗生素青霉素V钾为模板,制备了分子印迹聚合物(MIP),通过紫外吸收光谱法研究发现模板分子与单体之间产生了氢键相互作用,二者的结合常数为2.889×109L3/mol3,化学配位比为3。通过吸附实验,探讨了印迹聚合物对模板分子的识别特性,结果印迹因子为2.31,最大表观结合量为8.63μg·mg-1,表明MIP对模板青霉素V钾有较强的特异识别性,为进一步将其应用于实际样品中抗生素的残留分析奠定了基础。     

分子印迹技术制备石油有机硫组分固相萃取剂的研究

用分子印迹技术合成了对石油有机硫组分二苯并噻吩(Dibenzothiophene，DBT)具有高效选择性的分子模板聚合物(Molecularly Imprinted Polymer，MIP)，通过静态吸附的方法研究了不同功能单体和致孔剂及其用量对模板聚合物特异性识别能力的影响．实验表明，以4-乙烯基吡啶(4-VP)为功能单体，在甲苯溶剂中聚合得到的固相萃取剂对DBT具有较大的吸附富集能力和识别特性．其饱和吸附容量达到48．3mg／g．     

虚拟模板/硅胶表面分子印迹材料的制备及其在海水溶液中的吸附行为研究

以萘乙酸为虚拟模板,以甲基丙烯酸为功能单体、二甲基丙烯酸乙二醇酯为交联剂,用表面聚合-牺牲硅胶法合成了孔状结构的萘分子印迹聚合物.采用红外光谱、扫描电镜和N2吸附实验对印迹聚合物进行了表征;运用理论化学计算探讨了功能单体的筛选方法;利用平衡吸附法考察了印迹材料对海水中萘、蒽、菲化合物选择识别特性.实验表明: 以α-萘乙酸分子为模板的分子印迹聚合物对萘具有较好的识别能力.另外,由于α-萘乙酸分子中羧基的存在,使得分子印迹聚合物(MIP)的印迹空穴又与菲的体积大小相匹配,所以也表现出对菲的独特吸附能力.制备的印迹材料可望用于海水中2～3环多环芳烃的选择性吸附与富集.     

模拟受体聚合物的合成及吸附行为研究

采用紫外光引发聚合的分子印迹技术,分别制备阿替洛尔、美托洛尔、尼莫地平、酮糠唑4种模板化合物的分子印迹聚合物(molecularlyimprinted polymers,MIP).利用紫外平衡吸附法研究了聚合物的吸附性能和选择识别能力.结果表明,阿替洛尔、美托洛尔印迹聚合物对各自的模板分子呈现良好的再识别性能,而尼莫地平、酮糠唑印迹聚合物对原模板则几乎没有识别能力.Scatchard分析显示了功能单体甲基丙烯酸(MAA)与模板分子阿替洛尔、美托洛尔在自组装过程中通过氢键和离子键形成了至少两类不等价的结合位点.对底物交叉结合实验也表明阿替洛尔、美托洛尔这两种印迹聚合物具有良好的选择性,分离因子α值分别达到了1.75和1.62,而空白聚合物则分别仅为1.07和0.97.     

液晶分子印迹整体柱的制备及其分子识别热力学

液晶分子印迹聚合物(MIPs)因刚性液晶单体的加入而在超低交联度水平下也能印迹和识别模板分子,有效解决了传统MIPs因高交联度造成的位点包埋、结合容量低、传质慢等问题。尽管液晶MIPs具有如此独特的优势,但却面临着由于交联度的大幅度降低而导致印迹效果下降的问题。为了研究液晶MIPs的结合特性,制备具有良好印迹效果的低交联液晶MIPs,该文通过二次接枝聚合,制备了一系列不同交联度的液晶分子印迹整体柱,用高效液相色谱法研究了聚合参数与印迹整体柱亲和性的关系。实验中选用三羟甲基丙烷三甲基丙烯酸酯(TRIM)为交联剂,以甲苯和十二醇为致孔剂合成整体柱骨架,并在此基础上以(S)-萘普生为模板,加入液晶单体4-氰基苯基单环己基乙烯(CPCE)进行二次聚合接枝。实验中系统考察了流动相中乙腈比例及缓冲液pH值对色谱保留的影响,结果发现液晶单体的加入使得MIPs对萘普生保留控制机制由原来的氢键作用变为了疏水作用;通过动态吸附实验得到的突破曲线经前沿分析及对吸附等温线Langmuir、Freundlich和Scatchard分析拟合,发现交联度为15%时液晶MIPs印迹因子最大(3.78)、非均一性最强,且特异性吸附量高于非特异性吸附量。液晶MIPs的计量置换模型(SDM-R)分析表明,液晶印迹整体柱对模板分子的总亲和力(ln A=0.645)明显高于其类似物;而从空间匹配程度看,与液晶印迹整体柱空间匹配程度最高的是酮洛芬而非模板分子,但液晶印迹整体柱对酮洛芬的总亲和力(ln A=0.242)不及模板分子的一半,表明在本低交联液晶印迹系统中,空间效应不是决定印迹系统识别能力的主要因素。进一步的分离热力学研究发现,低交联液晶印迹柱的|ΔΔH|<T|ΔΔS|,而交联度为70%的非液晶MIPs柱的|ΔΔH|>T|ΔΔS|,表明液晶MIPs的分离过程是一个熵控制过程,而常规无液晶MIPs的分离过程是一个焓控制过程。上述结果表明,液晶单体的加入改变了MIPs的识别机制,适当的低交联度可显著提高液晶MIPs的识别性能,因此液晶MIPs这些特质有望使其成为新一代的MIPs。     

Design of EGDMA‐Crosslinked Theophylline Imprinted Polymer with High Specificity and Selectivity

An attempt has been made to design theophylline selective polymers with maximum selectivity and specificity, and to relate the rebinding capacity of the polymers with the degree of crosslinking, as well as with the template‐monomer ratio. The theophylline imprinted and non‐imprinted polymers based on methacrylic acid as the functional monomer and ethylene glycol dimethacrylate (EGDMA) as crosslinking agent (35–80 mol%) were prepared. The developed imprinted polymers were characterized by FT‐IR, ¹H and ¹³C‐NMR spectra. Equilibrium binding of theophylline by the imprinted and non‐imprinted polymers were investigated and optimized the conditions. Imprinted polymers showed specific binding of the template theophylline. Selectivity of the imprinted polymers was investigated towards caffeine and nicotine. Imprinted polymers showed specific and selective binding of theophylline, which varied with the degree of EGDMA crosslinking. Equilibrium rebinding experiments proved that imprinted polymer with moderate (70%) crosslinking with 1∶2 template‐functional monomer ratio is ideal with maximum specificity and selectivity.     

Binding properties of 2,4,5-trichlorophenoxyacetic acid-imprinted polymers prepared with different molar ratios between template and functional monomer

Several molecularly-imprinted polymers binding the herbicide 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) were prepared with a molar ratio between the functional monomer and the template molecule in the pre-polymerisation mixture set between 1+2 and 20+1. The functional monomer used was 4-vinylpyridine (4-VP), the cross-linker was ethylene dimethacrylate, and the porogenic solvent was a mixture of methanol–water 3+1 (v/v). The polymers obtained were grinded, sieved and packed in 100 mm×3.9 mm HPLC columns. The effects of the mobile phase composition were evaluated by eluting the columns with acetonitrile–water mixtures. The results obtained indicate that column capacity, selectivity factor and the imprinting effect are controlled by ion-pair and hydrophobic interactions between the analyte and the stationary phase. In the full range of ratios considered, column capacity, selectivity factor and imprinting effect are inversely proportional to the molar ratio between the template molecule and the functional monomer.     

Selective surface modification technique for improvement of chromatographic separation selectivity for sugar derivatives.

Highly cross-linked macroporous polymers were prepared utilizing ethylene dimethacrylate as a cross-linking agent, in the presence or absence of methyl-alpha-D-glucoside as a kind of template molecule with methacrylic acid as a functional monomer. After the preparation of the polymers, we applied a high temperature to the cross-linked polymers to study the changes of adsorption properties of the polymers for sugar derivatives including the template molecule utilized. Interestingly, the heat treatment up to 250 degrees C afforded improvement of relative adsorption affinity for several sugar derivatives including the template molecule, while heat treatment up to 150 degrees C did not afford those improvements. The detailed studies including polymers prepared using acrylic acid as a functional monomer instead of methacrylic acid prove that temperatures higher than the Tg temperature of the polymer derived from a functional monomer such as methacrylic acid and higher than the melting point (mp) of the sugar template are necessary to afford the observed improvement of relative affinity based on the surface modification effects through the heat treatment to cross-linked polymers.     

鹅去氧胆酸分子印迹聚合物微球的制备及选择性分子识别

以鹅去氧胆酸(CDCA)为印迹分子, 甲基丙烯酸为功能单体, 丙烯酸乙二醇二甲基酯和三羟甲基丙烷三甲基丙烯酸酯为交联剂, 在氯仿中采用沉淀聚合法制得平均粒径为200~300 nm的分子印迹聚合物微球(MIPMS). 用红外光谱研究了印迹分子与功能单体之间的作用类型, 用透射电镜对聚合物的形貌进行了表征. 结果表明, 聚合物微球在合成过程中形成了两类结合位点, 该分子印迹聚合物对CDCA具有良好的特异吸附性能, 可用于胆汁酸的分离、纯化, 交联剂的种类可以影响分子印迹聚合物的形貌和吸附性能.     

Synthesis and binding site characteristics of 2,4,6-trichlorophenol-imprinted polymers

2,4,6-Trichlorophenol (2,4,6-TCP)-imprinted micro- and submicrospheres prepared by precipitation polymerization were compared with templated materials obtained by conventional bulk polymerization. The influence of the type and amount of functional monomer, the type and amount of cross-linker, polymerization temperature, porogen, and the ratio of template molecule and functional monomer to cross-linker on the size of the obtained particles were investigated. UV-Vis spectrophotometer experiments revealed that the microsphere polymers provided higher affinity to the template in contrast to imprinted polymers prepared by bulk polymerization. The binding properties of the microspheres, including binding isotherms and affinity distribution, were studied via Freundlich isotherm affinity distribution (FIAD) analysis. The obtained results indicated that microspheres prepared by precipitation polymerization provided superior rebinding properties during equilibrium binding in contrast to bulk polymers and submicrosphere polymers. Moreover, release experiments showed that 80% of rebound 2,4,6-TCP was released from the imprinted microspheres within the first 2 h, while more intimately bound 2,4,6-TCP molecules were released in the following 40 h. The morphologies and porosities of the resulting imprinted materials were characterized by scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) analysis, respectively. The microsphere polymers exhibited a regular spherical shape with a high degree of monodispersity to the corresponding bulk polymers. Furthermore, the micro- and submicrospheres were characterized by narrow distribution of pores in contrast to a heterogeneity index of m = 0.6647 for the microsphere imprinted polymer.     

冬凌草甲素分子印迹聚合物的制备及分子识别性能研究

以抗肿瘤药物分子冬凌草甲素为模板,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(ED-MA)作交联剂,采用沉淀聚合法和本体聚合法,制备对冬凌草甲素具有特定亲和选择性的分子印迹聚合物,并用激光粒度扫描和扫描电镜对聚合物的粒径和表面形貌进行了表征,采用平衡结合实验评价了两类分子印迹聚合物的吸附性能.结果表明,与使用...     

Isolation of sinapic acid from broccoli using molecularly imprinted polymers

A molecularly imprinted polymer was synthesized for the purpose of sinapic acid isolation from Egyptian nutraceutical Botrytis italica, L. (broccoli) due to its prominent medicinal and wide pharmacological activities. A computational study was first developed to determine the optimal template to functional monomer molar ratio. Based on the computational results, five polymers were synthesized using a bulk polymerization method with sinapic acid as the template molecule. Evaluation of the synthesized polymers binding performance was carried out using batch rebinding assay, which revealed that the molecularly imprinted polymer of molar ratio (1:4:20), template to functional monomer (4‐vinyl pyridine) to crosslinker (ethylene glycol dimethacrylate) was of optimum performance, thus, this polymer was applied for sinapic acid isolation from closely related analogues. This represents a more practical approach to isolate sinapic acid from different natural extracts selectively.     

苄嘧磺隆印迹聚合物的波谱分析及吸附性能研究

以苄嘧磺隆为模板分子, α-甲基丙烯酸为功能单体, 三甲氧基丙烷三甲基丙烯酸酯为交联剂, 二氯甲烷为致孔剂, 在20 ℃温度下, 采用紫外引发沉淀聚合方法制备了苄嘧磺隆分子印迹聚合物. 紫外光谱和核磁共振氢谱实验提示了聚合前模板分子与功能单体之间的相互作用主要是分子间氢键, 分子间氢键相互作用能和双氢键的键距由Hyperchem 7.0和Gaussian 03W软件分别计算为: －28.6163 kJ/mol和0.179～0.181 nm. 制备的印迹聚合物在高效液相色谱和吸附动力学实验中都表现出对模板分子有较强的吸附作用.     

Suppression of background sites in molecularly imprinted polymers via urea-urea monomer aggregation

The molecular imprinting process provides a synthetically efficient route to polymers with tailored recognition properties. However, the binding properties of the templated binding sites are often masked by the more prevalent background binding sites. Therefore, a strategy for reducing the number of background binding sites was developed and evaluated that uses functional monomer aggregation to suppress the formation of background sites. A series of imprinted and non-imprinted polymers was formed using crosslinking urea monomer and were evaluated for their ability to rebind the anionic template, tetrabutylammonium diphenyl phosphate (TBA-DPP). The urea monomer was shown to form linear hydrogen bonded aggregates in solution and in the solid state. Functional monomer aggregation in the polymerization solution was shown to dramatically reduce the numbers of background binding sites by occupying and blocking the urea recognition groups that were not bound to the template molecule. Despite the low aggregation constant of the urea monomer (3.5 M(-1) in chloroform), the number of background sites was reduced by more than 60%. We predict that this strategy of using monomers that aggregate to reduce background binding sites is a general one for MIPs and other types of polymers with tailored recognition properties. The key is to identify self-assembling monomers where the guest binding processes are stronger than the aggregation processes.     

光接枝表面修饰法制备牛血红蛋白的分子印迹微球

聚苯乙烯球载体表面经引发转移终止剂修饰后, 采用光接枝表面印迹方法制备了以牛血红蛋白(BHb)为模板分子、丙烯酰胺为功能单体和N,N′-亚甲基双丙烯酰胺为交联剂的分子印迹聚合物微球(MIP). 进一步采用红外光谱(IR)、扫描电子显微镜(SEM)和元素分析对聚合物微球进行了表征, 证实了载体表面成功地接枝了分子印迹层, 并研究了其吸附性能和分子识别选择性能. 结果表明, 采用光接枝表面修饰法制备的分子印迹微球对模板分子有着很好的吸附容量和识别选择性.