NaYF4∶Yb3+,Er3+@NaGdF4@TaOx多模态纳米探针的合成及其在生物成像中的应用

采用溶剂热法在稀土掺杂NaYF4∶Yb3+,Er3+上转换纳米粒子上包覆一层NaGdF4,再利用反相微乳液法在NaGdF4上覆盖一层TaOx,从而合成NaYF4∶Yb3+,Er3+@NaGdF4@TaOx核壳壳结构的纳米探针。使用透射电镜(TEM)、X射线衍射(XRD)及X射线能量色散谱分析(EDS)对NaYF4∶Yb3+,Er3+@NaGdF4@TaOx纳米探针的结构和组成进行表征。并通过荧光光谱、磁滞回线以及电子计算机X射线横断扫描(CT)造影成像等方法对其性能进行了表征,证明该纳米探针具有良好的光学、磁学和CT造影特性。将NaYF4∶Yb3+,Er3+@NaG-dF4@TaOx纳米探针应用于小鼠活体成像实验,结果表明,这种纳米探针对小鼠肿瘤部位的磁共振成像(MRI)和CT信号均有较好的增强效果,表明其在多模态造影成像方面有潜在的应用前景。     

内嵌硫化镉与上转换纳米颗粒的二氧化钛复合纳米管用于近红外光驱动光催化

由于近红外光在太阳光谱中占44%,因此,近红外光驱动的光催化剂的研制具有十分重要的意义.上转换发光材料可将低能量的近红外光子转换为高能光子,这种高能光子可以通过构建荧光共振转移系统将能量转移并活化量子效率较高的半导体材料,对于太阳能的转化利用具有潜在的应用前景.在本文中,通过胶体化学的过程在电纺丝制备的内嵌CdS纳米颗粒以及上转换荧光纳米颗粒(UCNPs)的二氧化硅复合纳米纤维表面外延生长一层二氧化钛层,通过高温煅烧得到二氧化钛复合纳米管.我们通过二氧化硅结构将CdS纳米颗粒与上转换荧光纳米颗粒紧紧束缚在一起,实现较高的荧光共振能量转移.而且,选择β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4:Yb(20%),Er(2%)作为纳米能量转换器,替代以前研究工作中使用的β-NaYF4:Yb(30%),Tm(0.5%)或者β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4纳米颗粒,来进一步提高近红外光的转换效率.通过透射电子显微镜照片很清楚的观察到制备的TiO2复合纳米管内部内嵌有大量的CdS与上转换纳米颗粒.通过X-射线衍射以及X-射线光电子能谱能仪器对产物的物相以及表面的化学组成进行了细致的表征.结果显示,通过本实验方法已经成功获得了TiO2复合纳米管.用稳态与瞬态荧光仪研究了最终样品的荧光性质.研究结果揭示,与上转换纳米颗粒以及二氧化硅复合纳米纤维相比,复合二氧化钛纳米管可以将上转换荧光纳米颗粒的(UV-Vis)部分荧光完全淬灭了.特别是,铒离子的荧光(650 nm)也被有效淬灭转移,说明本研究采用β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4:Yb(20%),Er(2%)纳米能量转换器,可以提高近红外光的转换效率,紫外-可见吸收光谱证实,这种二氧化钛纳米管在紫外-可见光区中的吸收光谱与β-NaYF4:Yb(30%),Tm(0.5%)@NaYF4:Yb(20%),Er(2%)纳米颗粒的荧光光谱具有较大的重叠,使得上转换荧光纳米颗粒与CdS以及二氧化钛组分之间的荧光共振转移的效率大大提高,进而会显著提高光催化的效果.以罗丹明染料作为污染物为模型,我们研究了罗丹明染料在氙灯下或者近红外光光照下的光催化分解实验.研究结果表明,90%的罗丹明染料分子在20 min内就被降解掉,效率高于其它的近红外光催化剂.上转换荧光纳米颗粒的能量转换效率可以得到大幅度提高,本研究工作中制备的光催化剂利用太阳能的效率将会得到极大提高,在未来为能源危机以及环境保护提供一种可供选择的方法与技术.     

内嵌硫化镉与上转换纳米颗粒的二氧化钛复合纳米管用于近红外光驱动光催化（英文）

由于近红外光在太阳光谱中占44%,因此,近红外光驱动的光催化剂的研制具有十分重要的意义.上转换发光材料可将低能量的近红外光子转换为高能光子,这种高能光子可以通过构建荧光共振转移系统将能量转移并活化量子效率较高的半导体材料,对于太阳能的转化利用具有潜在的应用前景.在本文中,通过胶体化学的过程在电纺丝制备的内嵌CdS纳米颗粒以及上转换荧光纳米颗粒(UCNPs)的二氧化硅复合纳米纤维表面外延生长一层二氧化钛层,通过高温煅烧得到二氧化钛复合纳米管.我们通过二氧化硅结构将CdS纳米颗粒与上转换荧光纳米颗粒紧紧束缚在一起,实现较高的荧光共振能量转移.而且,选择β-NaYF_4:Yb(30%),Tm(0.5%)@NaYF_4:Yb(20%),Er(2%)作为纳米能量转换器,替代以前研究工作中使用的β-NaYF_4:Yb(30%),Tm(0.5%)或者β-NaYF_4:Yb(30%),Tm(0.5%)@NaYF_4纳米颗粒,来进一步提高近红外光的转换效率.通过透射电子显微镜照片很清楚的观察到制备的Ti O2复合纳米管内部内嵌有大量的CdS与上转换纳米颗粒.通过X-射线衍射以及X-射线光电子能谱能仪器对产物的物相以及表面的化学组成进行了细致的表征.结果显示,通过本实验方法已经成功获得了Ti O2复合纳米管.用稳态与瞬态荧光仪研究了最终样品的荧光性质.研究结果揭示,与上转换纳米颗粒以及二氧化硅复合纳米纤维相比,复合二氧化钛纳米管可以将上转换荧光纳米颗粒的(UV-Vis)部分荧光完全淬灭了.特别是,铒离子的荧光(650 nm)也被有效淬灭转移,说明本研究采用β-NaYF_4:Yb(30%),Tm(0.5%)@NaYF_4:Yb(20%),Er(2%)纳米能量转换器,可以提高近红外光的转换效率,紫外-可见吸收光谱证实,这种二氧化钛纳米管在紫外-可见光区中的吸收光谱与β-NaYF_4:Yb(30%),Tm(0.5%)@NaYF_4:Yb(20%),Er(2%)纳米颗粒的荧光光谱具有较大的重叠,使得上转换荧光纳米颗粒与CdS以及二氧化钛组分之间的荧光共振转移的效率大大提高,进而会显著提高光催化的效果.以罗丹明染料作为污染物为模型,我们研究了罗丹明染料在氙灯下或者近红外光光照下的光催化分解实验.研究结果表明,90%的罗丹明染料分子在20 min内就被降解掉,效率高于其它的近红外光催化剂.上转换荧光纳米颗粒的能量转换效率可以得到大幅度提高,本研究工作中制备的光催化剂利用太阳能的效率将会得到极大提高,在未来为能源危机以及环境保护提供一种可供选择的方法与技术.     

NaYF4:Yb,Tm上转换发光纳米材料的合成及在手印显现中的应用研究

采用溶剂热法合成了NaYF_4:Yb, Tm上转换发光纳米材料,并对纳米材料的微观形貌、物相组成、近红外吸收性能、上转换发光性能进行了表征。将制得的NaYF_4:Yb, Tm上转换发光纳米粉末用于潜在手印的显现技术中,分别获得了蓝色可见光显现信号和近红外光显现信号,通过光谱表征手段详细考察了手印显现的对比度。实验结果表明,基于NaYF_4:Yb, Tm的手印纳米荧光显现方法具有对比度强、灵敏度高、选择性好等优势,对于颜色复杂及荧光强烈客体表面潜在手印的显现是一种较为理想的方法。     

荧光增强核壳结构NaYF_4:Yb,Er@NaGdF_4@SiO_2@Ag上转换荧光纳米粒子的制备与性能

通过热分解法合成了NaYF_4:Yb,Er油溶性上转换荧光纳米粒子,并以NaYF_4:Yb,Er为晶种制备了核壳结构的NaYF_4:Yb,Er@Na Gd F4荧光纳米粒子,经荧光测试纳米粒子的荧光性能提高了8倍。用反相微乳液法在纳米粒子表面包覆了一层Si O2-(CH2)3-NH2,有效地改善了纳米粒子的水溶性。在Si O2表面沉积Ag纳米粒子,通过贵金属纳米粒子表面等离子共振效应进一步增强了复合纳米粒子的荧光性能,经测试纳米粒子荧光性能又提高了8倍。通过小鼠体内成像实验,发现所合成的纳米粒子生物体内具有较强荧光成像功能。试验中还发现表面活性剂Igepal CO-520和TEOS对包覆层形貌有着重要的影响。     

ZnO花状微球负载NaYF4:Yb,Tm复合物的制备及电磁性能EI北大核心CSCD

采用微波辅助溶剂热-超声浸渍两步法制备了ZnO花状微球负载NaYF4:Yb,Tm(ZnO/NaYF4:Yb,Tm)复合材料。通过对样品的形貌、组成、静磁与电磁特性的表征,讨论了NaYF4:Yb,Tm纳米晶负载量以及煅烧温度对复合材料吸波性能的影响,同时,揭示了该复合材料的吸波机制。结果显示,电磁波在ZnO分级花状结构中的多重反射可以提高材料对电磁波的吸收效率。同时,NaYF4:Yb,Tm的引入有利于界面极化、缺陷极化的产生。得益于上述优势和异质结构的协同作用,当NaYF4:Yb,Tm负载量为0.15mmol时,经500℃煅烧处理所得ZnO/NaYF4:Yb,Tm复合材料展示出优异的吸波特性,当匹配厚度为2.0mm时,对应有效吸收带宽为4.89GHz,其最大吸收为-39.38dB。     

NaYF4∶Er3＋, Yb3＋纳米晶的液相合成

采用丙三醇液相结晶法制备了NaYF4∶Er3＋, Yb3＋上转换纳米晶, 合成步骤被简化. 常温下, 用980 nm的红外激光激发可以观察到很强的绿光、红光发射, 用荧光光谱仪记录了该上转换光谱. X射线粉末衍射(XRD)结果表明, 该方法制备NaYF4∶Er3＋, Yb3＋纳米晶属于立方混合六方晶系. 研究了纳米晶的上转换发光机理, 根据晶体场理论对Er3＋的两个上转换能级进行了Stark分裂计算, 对两个能级之间的谱线进行了归属, 进一步证实了980 nm光子激发Er3＋离子的上转换机理, 一个是连续吸收两个980 nm光子的过程(激发态吸收), 另一个是吸收980 nm光子后, 电子转移到亚稳态能级, 然后再吸收980 nm光子过程(能量转移上转换).     

NaYF_4：Yb,Er上转换荧光纳米粒子的表面修饰及其在免疫分析中的应用

稀土掺杂上转换荧光纳米材料因其近红外区激发,可见光区发射的特殊发光性能,在生物标记方面具有独特优势,可大幅度降低荧光背景.β-NaYF4：Yb,Er是目前已知的发光效率最高的上转换荧光纳米材料之一,已在生命分析及生物成像分析领域展现出了广阔的应用前景.然而,由于现有β-NaYF4：Yb,Er制备工艺多是在高温条件下于高沸点有机溶剂中反应制得,所得产品在水溶液中的分散性差,限制了其在生命分析中的广泛应用.本文采用聚丙烯酸（PAA）配体交换反应,对表面包覆油酸基团的疏水β-NaYF4：Yb,Er纳米粒子进行了有效的表面修饰.表面修饰后,上转换荧光纳米粒子表面的PAA具有众多游离羧基,使其在水溶液中具有良好的分散性.同时,由于羧基的存在,使得带有氨基的生物分子能够通过化学交联反应结合到纳米粒子表面.本文以PAA表面修饰后的β-NaYF4：Yb,Er纳米粒子为荧光探针,以磁珠作为免疫反应的载体,成功构建了一种新型免疫传感器,对模型靶标分子羊抗人IgG进行了灵敏检测.磁珠表面固定兔抗羊IgG,PAA修饰的β-NaYF4：Yb,Er纳米粒子表面连接人IgG,当样品中存在羊抗人IgG时,便会在磁珠表面形成（兔抗羊IgG-羊抗人IgG-上转换荧光纳米粒子标记的人IgG）三明治式免疫复合体,通过磁分离除去未反应的组分,在980nm激光激发下测定免疫复合体的上转换荧光强度,即可实现靶标分子的高灵敏分析,可检测到低至0.1ng/mL的羊抗人IgG.同时,以磁珠为载体的免疫复合体也可通过激光扫描共聚焦荧光显微镜进行荧光成像分析,背景荧光信号低,成像质量高.实验结果表明,PAA修饰的β-NaYF4：Yb,Er上转换荧光纳米粒子是一种理想的生物标记材料,有望在生物传感及生物成像分析领域获得广泛应用.     

LaF_3∶Yb~(3+),Er~(3+)纳米晶:溶剂热法合成及上转换发光性质

利用溶剂热合成方法,分别以油酸和油胺为表面有机配体,合成了具有六角结构,颗粒尺寸分别为19和23nm单分散的LaF3:Yb3+,Er3+纳米晶。在980nm红外激光照射下,LaF3:Yb3+,Er3+纳米晶发射出肉眼可观察的绿色和红色上转换荧光,而且其发光过程均符合双光子过程。结合红外光谱与上转换光谱分析了表面有机配体对LaF3:Yb3+,Er3+纳米晶上转换发光的影响,结果显示,以油酸分子为表面配体的纳米晶具有较高的上转换发射强度,但以油胺为表面配体的纳米晶的红光发射相对增强。     

具有红光发射的稀土上转换发光纳米晶及其介孔直接功能化

红光发射稀土上转换发光纳米晶(UCNPs)在光动力治疗(PDT)等方面具有特定的优势。将油溶性的UCNPs通过表面改性转变为水溶性,对其在生物医疗、疾病诊断等方面的应用具有重要意义。利用一种简单易行的方法将具有红光发射的UCNPs进行介孔直接功能化表面修饰,制备了一种具有良好水溶性的纳米材料NaYF4:Yb/Er/Mn@mSiO2。实验结果表明该材料核-壳结构明显,形貌均一,在980 nm的激发下保持了上转换发光特性。该材料在光动力治疗等方面具有良好的潜在应用价值。     

Near‐Infrared‐Light‐Driven Artificial Photosynthesis by Nanobiocatalytic Assemblies

Artificial photosynthesis in nanobiocatalytic assemblies aims to reconstruct man‐made photosensitizers, electron mediators, electron donors, and redox enzymes for solar synthesis of valuable chemicals through photochemical cofactor regeneration. Herein, we report, for the first time, on nanobiocatalytic artificial photosynthesis in near‐infrared (NIR) light, which constitutes over 46% of the solar energy. For NIR‐light‐driven photoenzymatic synthesis, we synthesized silica‐coated upconversion nanoparticles, Si‐NaYF4:Yb,Er and Si‐NaYF4:Yb,Tm, for efficient photon‐conversion through Förster resonance energy transfer (FRET) with rose bengal (RB), a photosensitizer. We observed NIR‐induced electron transfer by using linear sweep voltammetric analysis; this indicates that photoexcited electrons of RB/Si‐NaYF4:Yb,Er are transferred to NAD+ through a Rh‐based electron mediator. RB/Si‐NaYF4:Yb,Er nanoparticles, which exhibit higher FRET efficiency due to more spectral overlap than RB/Si‐NaYF4:Yb,Tm, perform much better in the photoenzymatic conversion.     

Novel heterometal-organic complexes as first single source precursors for up-converting NaY(Ln)F4 (Ln = Yb, Er, Tm) nanomaterials

First heterometal-organic single source precursors for NaYF(4) nanomaterials as a host matrix for up-conversion emission are reported. These novel heterobimetallic derivatives NaY(TFA)(4)(diglyme) (1), [Na(triglyme)(2)][Y(2)(TFA)(7)(THF)(2)] (2) and Na(2)Y(TFA)(5)(tetraglyme) (3) (TFA = trifluoroacetate), which were fully characterized by elemental analysis, FT-IR and (1)H NMR spectroscopy, TG-DTA data as well as single crystal X-ray structures, are advantageous in terms of being anhydrous and having lower decomposition temperatures in comparison to the homometallic precursor Y(TFA)(3)(H(2)O)(3). In addition, they also contain chelating glyme ligands, which act as capping reagents during decomposition to control the NaYF(4) particle size and render them monodisperse in organic solvents. On decomposition in 1-octadecene, the molecular derivatives 1 and 3 are converted, in the absence of any surfactant or capping reagent, to cubic NaYF(4) nanocrystals at significantly lower temperatures (below 250 °C). At higher temperature, a mixture of the cubic and hexagonal phases was obtained, the relative ratio of the two phases depending on the reaction temperature. A pure hexagonal phase, which is many folds more efficient for UC emission than the cubic phase, was obtained by calcining nanocrystals of mixed phase at 400 °C. In order to co-dope this host matrix with up-converting lanthanide cations, analogous complexes NaLn(TFA)(4)(diglyme) [Ln = Er (4), Tm (5), Yb (6)] and Na(2)Ln(TFA)(5)(tetraglyme) [Ln = Er (7), Yb (8)] were also prepared and characterized. The decomposition in 1-octadecene of suitable combinations and appropriate molar ratios of these yttrium, ytterbium and erbium/thulium derivatives gave cubic and/or hexagonal NaYF(4): Yb(3+), Er(3+)/Tm(3+) nanocrystals (NCs) capped by diglyme or tetraglyme ligands, which were characterized by IR, TG-DTA data, EDX analysis and TEM studies. Surface modification of these NCs by ligand exchange reactions with poly acrylic acid (PAA) and polyethyleneglycol (PEG) diacid 600 was also carried out to render them water soluble. The THF solutions of suitable combinations of the diglyme derivatives were also used to elaborate the thin films of NaYF(4):Yb(3+), Er(3+)/Tm(3+) on a glass or Si wafer substrate by spin coating. The multicolour up-conversion fluorescence was successfully realized in the Yb(3+)/Er(3+) (green/red) and Yb(3+)/Tm(3+) (blue/violet) co-doped NaYF(4) nanoparticles and thin films, which demonstrates that they are promising UC nanophosphors of immense practical interest. The up-conversion excitation pathways for the Er(3+)/Yb(3+) and Tm(3+)/Yb(3+) co-doped materials are discussed.     

Synthesis of hexagonal-phase core-shell NaYF4 nanocrystals with tunable upconversion fluorescence

Hexagonal-phase core-shell-structured NaYF 4:Yb,Tm@beta-NaYF 4:Yb,Er and beta-NaYF 4:Yb,Tm@beta-NaYF 4:Yb,Er@beta-NaYF 4:Yb,Tm nanocrystals were synthesized by a seeded growth approach. beta-NaYF 4:Yb,Tm nanocrystals with 20 nm diameter were used as seed crystals to induce the growth of beta-NaYF 4:Yb,Er and then beta-NaYF 4:Yb,Tm crystals, resulting in the formation of core-shell-structured nanocrystals with upconverting lanthanide ions Tm and Er doped in the core and shell, respectively.     

Facile patterning of upconversion NaYF4:Yb,Er nanoparticles

Different kinds of highly ordered patterns of NaYF(4):Yb,Er nanoparticles on gold substrates were fabricated using a simple method combining micro-contact printing and "breath figures" techniques. Ordered arrays of water droplets were first formed in the hydrophilic regions of patterned self-assembled monolayers (SAMs). This was subsequently submerged in a chloroform solution of NaYF(4):Yb,Er nanoparticles. The particles were spontaneously assembled at the interface of chloroform/water droplet surface, leading to different kinds of uniform patterns after solvent evaporation. The structures of NaYF(4):Yb,Er particles patterns depended on the dimension of the substrate, the concentration of the NaYF(4):Yb,Er nanoparticles and the water condensation process.     

Synthesis of colloidal upconverting NaYF4 nanocrystals doped with Er3+, Yb3+ and Tm3+, Yb3+ via thermal decomposition of lanthanide trifluoroacetate precursors

Upconverting lanthanide-doped nanocrystals were synthesized via the thermal decomposition of trifluoroacetate precursors in a mixture of oleic acid and octadecene. This method provides highly luminescent nanoparticles through a simple one-pot technique with only one preparatory step. The Er3+, Yb3+ and Tm3+, Yb3+ doped cubic NaYF4 nanocrystals are colloidally stable in nonpolar organic solvents and exhibit green/red and blue upconversion luminescence, respectively, under 977 nm laser excitation with low power densities.     

Upconversion multicolor fine-tuning: visible to near-infrared emission from lanthanide-doped NaYF4 nanoparticles

A general approach to fine-tuning the upconversion emission colors, based upon a single host source of NaYF4 nanoparticles doped with Yb3+, Tm3+, and Er3+, is presented. The emission intensity balance can be precisely controlled using different host-activator systems and dopant concentrations. The approach allows access to a wide range of luminescence emission from visible to near-infrared by single-wavelength excitation.     

Quest to enhance up-conversion efficiency: a comparison of anhydrous vs. hydrous synthesis of NaGdF4: Yb3+ and Tm3+ nanoparticles

A major challenge in the field of up-converting (UC) nanomaterials is to enhance their efficiencies. The –OH defects on the surface of the nanoparticles are thought to be the main cause of luminescence quenching, but there are no comparative studies in the literature showing the impact of anhydrous vs. hydrous synthesis on up-conversion efficiency. In this article, we present the synthesis of up-converting NaGdF₄: Yb⁺³, Tm⁺³ nanoparticles by two different methods: thermal decomposition of single source metal-organic anhydrous precursors [NaLn(TFA)₄(diglyme)] (Ln = Gd, Tm, Yb; TFA = trifluoroacetate) and room temperature co-precipitation using hydrated inorganic salts Ln(NO₃)₃·5H₂O (Ln = Gd, Tm, Yb), NaNO₃ and NH₄F in ethylene glycol. After a detailed study on the influence of solvents and the percentage of lanthanide dopant on the crystal phase of the up-converting nanoparticles (NPs) and their complete characterization, a comparative up-conversion study was carried out which revealed that the uniform nanospheres (av. size ～13 nm) obtained from the anhydrous SSP had significantly higher up-conversion efficiency than agglomerated nanorods (～197 nm in length and ～95 nm in width) produced from hydrated inorganic salts. An enhanced up-conversion quantum yield of 1.8% for the anhydrous sample validates the anhydrous precursor approach as a strategy to obtain small but highly emitting up-converting particles without requiring a silica or undoped matrix surface passivation layer.     

Green upconversion nanocrystals for DNA detection

By combining magnetic-field-assisted bioseparation and concentration technology with magnetite nanoparticles, novel green upconversion (UC) fluorescence nanocrystals (NaYF4:Yb3+/Er3+) have been applied to the sensitive detection of DNA.     

Rare-Earth nanoparticles with enhanced upconversion emission and suppressed rare-Earth-ion leakage

Upconversion emissions from rare-earth nanoparticles have attracted much interest as potential biolabels, for which small particle size and high emission intensity are both desired. Herein we report a facile way to achieve NaYF(4):Yb,Er@CaF(2) nanoparticles (NPs) with a small size (10-13 nm) and highly enhanced (ca. 300 times) upconversion emission compared with the pristine NPs. The CaF(2) shell protects the rare-earth ions from leaking, when the nanoparticles are exposed to buffer solution, and ensures biological safety for the potential bioprobe applications. With the upconversion emission from NaYF(4):Yb,Er@CaF(2) NPs, HeLa cells were imaged with low background interference.     

NaYF_4:Yb/Er-碳纳米管功能纳米材料的制备、表征及其在肿瘤细胞的靶向检测和治疗中的应用

将叶酸分子(FA)和2,3-二巯基丁二酸(DMSA)修饰的稀土上转换发光纳米粒子NaYF4:Yb/Er通过酰胺键偶联在多壁碳纳米管(MWCNT)的表面,得到NaYF4:Yb/Er-MWCNT-FA功能化复合纳米材料,并通过透射电子显微镜(TEM)、X射线衍射(XRD)、紫外-可见吸收光谱(UV-vis)、荧光光谱(PL)和共聚焦激光扫描显微镜等手段表征了其形貌、结构、发光性能和靶向成像性能.共聚焦激光扫描显微镜结果表明,相对于正常的HLF细胞,所制备的复合材料能够靶向检测叶酸受体高表达的宫颈癌Hela细胞.此外,将阿霉素进一步通过ππ堆垛吸附在此复合材料后,该载药体系具有明显的抗肿瘤活性,能够实现对肿瘤细胞的一步检测和治疗.