荧光/MRI双模态靶向成像诊疗试剂的制备

在聚乙二醇二胺(NH_2-PEG-NH_2)修饰的石墨烯量子点(GODs)表面以酰胺键偶联二乙基三胺五乙酸(DTPA)分子,之后将Gd~(3+)离子与其进行配合,得到了GODs-Gd(DTPA)复合纳米粒子,然后再通过酰胺键在GODs-Gd(DTPA)的表面修饰叶酸(FA)靶分子,最后进一步将阿霉素(DOX)通过π-π堆垛吸附在造影剂的表面,制备了FA/GODs-Gd(DTPA)/DOX荧光/MRI双模态靶向肺癌细胞成像诊疗试剂,通过透射电子显微镜、紫外可见吸收光谱、荧光光谱和激光共聚焦扫描显微镜等手段表征了其形貌、发光性能和靶向成像性能。MRI、激光共聚焦扫描显微镜和MTT等结果表明,相对于正常的HLF细胞,所制备的FA/GODs-Gd(DTPA)/DOX纳米粒子能够靶向检测FA受体高表达的肺癌H460细胞,并具有明显的抗肿瘤活性。     

靶向性纳米金探针对宫颈癌细胞的激光扫描共聚焦散射成像

制备了粒径均一的纳米金颗粒, 再对其表面进行叶酸修饰, 制得具有靶向性的纳米金探针. 利用激光扫描共聚焦显微镜(LSCM), 对靶向性纳米金的细胞特异性散射成像进行研究. 实验结果表明, 人宫颈癌细胞(Hela)对纳米金-叶酸的摄取作用强于对纳米金的摄取, 但随着时间的延长, 两者的差别逐渐减小. 表明在适当的时间内纳米金-叶酸探针对宫颈癌细胞具有良好的靶向性.     

基于NaYF_4∶Yb~(3+),Er~(3+)上转换发光纳米晶的复合微球组装及其光动力活性

采用微乳液法,以NaYF4∶Yb3+,Er3+纳米晶为发光基元,肽菁锌(Zn Pc)光敏分子与十八碳烯-马来酸酐共聚物(PMAO)为功能分子,一步组装获得了NaYF4-Zn Pc-PMAO复合微球,此微球同时具备成像与光动力活性功能,NaYF4可作为低生物背景的荧光成像剂,同时其上转换发光可以敏化Zn Pc用于光动力活性研究,PMAO分子经过简单的水解反应即可实现表面羧基功能化。TEM,Zeta电位与PL测试证实了微球的结构与性能。利用荧光共聚焦成像技术实现了对Hela细胞的发光成像;进一步通过单线态氧监测及980 nm光照下的MTT法细胞活性测试表明微球具有光动力活性功能。     

ZnO花状微球负载NaYF4:Yb,Tm复合物的制备及电磁性能EI北大核心CSCD

采用微波辅助溶剂热-超声浸渍两步法制备了ZnO花状微球负载NaYF4:Yb,Tm(ZnO/NaYF4:Yb,Tm)复合材料。通过对样品的形貌、组成、静磁与电磁特性的表征,讨论了NaYF4:Yb,Tm纳米晶负载量以及煅烧温度对复合材料吸波性能的影响,同时,揭示了该复合材料的吸波机制。结果显示,电磁波在ZnO分级花状结构中的多重反射可以提高材料对电磁波的吸收效率。同时,NaYF4:Yb,Tm的引入有利于界面极化、缺陷极化的产生。得益于上述优势和异质结构的协同作用,当NaYF4:Yb,Tm负载量为0.15mmol时,经500℃煅烧处理所得ZnO/NaYF4:Yb,Tm复合材料展示出优异的吸波特性,当匹配厚度为2.0mm时,对应有效吸收带宽为4.89GHz,其最大吸收为-39.38dB。     

叶酸功能化介孔碳纳米球负载阿霉素的细胞靶向传递及可控释放

以粒径90 nm的介孔碳纳米球作为靶向传药载体, 采用酸化处理改进了材料表面的亲疏水性及在溶液中的分散性, 通过壳寡糖功能化, 并利用EDC-NHS将叶酸修饰到介孔碳纳米球表面. 通过共聚焦激光扫描显微镜及流式细胞仪对实验体系的系统研究, 结果表明基于叶酸功能化的介孔碳纳米球能够有效提高负载药物对于HeLa细胞的跨膜转运效率, 叶酸阳性表达的HeLa细胞对于叶酸修饰的介孔碳纳米小球的吞噬效率明显高于叶酸阴性表达的MCF-7细胞. 对HeLa细胞毒性的定量分析表明叶酸的靶向作用在提高介孔碳纳米球内吞效率的同时, 进一步提高了阿霉素对于HeLa细胞的毒性.     

NaYF4:Yb,Er/Tm上转换荧光纳米材料的合成、修饰及应用*

上转换荧光纳米材料NaYF4:Yb,Er/Tm因具有独特的上转换发光性能,在固体激光器、三维立体演示、红外成像等很多方面都有着重要的应用。近年来,NaYF4:Yb,Er/Tm上转换纳米颗粒作为荧光标记物用于生物标记引起了研究者的浓厚兴趣。合成出高质量、高荧光性能的NaYF4:Yb,Er/Tm上转换纳米颗粒是使之能够在生物医学等领域广泛应用的前提条件。本文针对NaYF4:Yb,Er/Tm上转换荧光纳米颗粒的合成方法、表面修饰以及生物应用等方面的研究进展进行综述。     

叶酸修饰的碳量子点在体外癌细胞成像中的应用

具有癌细胞靶向性的荧光纳米探针在生物分析、生物医学和临床诊断等领域有着重要的应用前景。 本文基于碳量子点的低毒性、低成本、环境友好、制备方法简单及高发光特性等优点,采用水热法合成了表面富含氨基的荧光碳量子点(CDs),进一步通过1-(3-二甲氨基丙基)-3-乙基碳二亚胺盐酸盐(EDC)缩合的方法,将叶酸(FA)分子中的羧基与其共价连接,从而得到叶酸共价修饰的碳量子点复合材料(FA-CDs)。 通过将该复合材料分别与海拉(Hela)和小鼠胚胎成纤维(NIH-3T3)细胞共培养,发现该复合材料能够特异性识别并标记癌细胞,且制备的该复合材料具有低毒性和高发光性等优点。 该工作对癌细胞的早期诊断具有重要意义。     

具有协同表面配体的水溶性稀土上转换发光纳米材料用于活体淋巴结显像

通过水热法,以油酸和两亲性聚乙烯吡咯烷酮(PVP)为协同表面配体,一步水热合成水溶性稀土上转换发光纳米材料(NaYF4:20％ Yb 1％ Tm).稀土纳米粒径尺寸平均为16 nm,在水溶液中稳定单分散,具有较强上转换发光.具有较低的细胞毒性,可用于上转换发光细胞成像.并进一步用于活体淋巴结显像,表现出高的信噪比.     

叶酸靶向乙酰普鲁兰纳米粒的制备及其靶向作用

以普鲁兰多糖为主链, 通过乙酰化反应合成了疏水性的乙酰普鲁兰(PA), 然后以N,N′-二环己基碳二亚胺(DCC)为偶联剂, 4-二甲氨基吡啶(DMAP)为催化剂, 将叶酸与PA偶联(FPA); 采用¹H NMR和X射线晶体衍射(XRD)等方法对产物结构进行了表征. 采用溶剂扩散法制备包载表阿霉素的PA和FPA纳米粒, 载药纳米粒形态为球形, 动态光散射粒径分析显示载药纳米粒粒径随载药量增加而增大. 透析法测定纳米粒中表阿霉素的体外释放表明, FPA纳米粒中药物释放速度快于PA纳米粒; 采用激光共聚焦显微镜观察PA/EPI及FPA/EPI纳米粒在KB细胞的摄取情况, 结果表明, FPA/EPI纳米粒进入细胞主要通过叶酸受体途径, 而PA/EPI纳米粒进入细胞与叶酸受体无关, 提示FPA将成为具有一定肿瘤靶向作用的新型载体.     

靶向喉癌的蜂毒肽重组抗体的构建及鉴定

利用大肠杆菌表达系统制备了重组融合蛋白antiEGFR/MEL,并用Ni2+层析柱对其进行了纯化.该重组蛋白中抗表皮生长因子受体(antiEGFR)单链抗体(scFv)主要靶向喉癌细胞中的EGFR,而蜂毒肽(MEL)主要抑制肿瘤细胞增殖.采用SDS-PAGE和Westernblot检测证明了antiEGFR/MEL的有效表达.共聚焦显微镜和流式细胞术实验结果表明,antiEGFR/MEL可与Hep-2肿瘤细胞有效结合,而几乎不与EGFR阴性的Jurkat细胞结合.噻唑蓝(MTT)检测结果说明,antiEGFR/MEL可有效抑制人喉癌细胞Hep-2的增殖.以上结果表明,antiEGFR/MEL能够有效靶向EGFR阳性肿瘤细胞,并有效抑制肿瘤细胞增殖,有望应用于EGFR靶向肿瘤治疗.     

Facile patterning of upconversion NaYF4:Yb,Er nanoparticles

Different kinds of highly ordered patterns of NaYF(4):Yb,Er nanoparticles on gold substrates were fabricated using a simple method combining micro-contact printing and "breath figures" techniques. Ordered arrays of water droplets were first formed in the hydrophilic regions of patterned self-assembled monolayers (SAMs). This was subsequently submerged in a chloroform solution of NaYF(4):Yb,Er nanoparticles. The particles were spontaneously assembled at the interface of chloroform/water droplet surface, leading to different kinds of uniform patterns after solvent evaporation. The structures of NaYF(4):Yb,Er particles patterns depended on the dimension of the substrate, the concentration of the NaYF(4):Yb,Er nanoparticles and the water condensation process.     

Fabrication of polystyrene/upconversion nanocrystals nanocomposite spheres through in situ dispersion polymerization

This paper presents a feasible and efficacious procedure to synthesize polystyrene/upconversion nanocrystals (PS/UCNCs) nanocomposite spheres with raspberry-like structure via an in situ dispersion polymerization technique. During this process, polyacrylic acid (PAA) as stabilizer plays the key role in adsorbing UCNCs, including NaYF(4):Yb(3+)-Er(3+), NaYF(4):Yb(3+)-Tm(3+) and NaYF(4):Yb(3+)-Ho(3+) onto the PS surfaces. TEM and SEM images confirmed the raspberry-like morphology of the obtained nanocomposite spheres. The effect of synthetic conditions, for instances, PAA amount, type and concentration of UCNCs on the structure and fluorescence of the PS/UCNCs nanocomposite spheres were studied in detail.     

Near‐Infrared‐Light‐Driven Artificial Photosynthesis by Nanobiocatalytic Assemblies

Artificial photosynthesis in nanobiocatalytic assemblies aims to reconstruct man‐made photosensitizers, electron mediators, electron donors, and redox enzymes for solar synthesis of valuable chemicals through photochemical cofactor regeneration. Herein, we report, for the first time, on nanobiocatalytic artificial photosynthesis in near‐infrared (NIR) light, which constitutes over 46% of the solar energy. For NIR‐light‐driven photoenzymatic synthesis, we synthesized silica‐coated upconversion nanoparticles, Si‐NaYF4:Yb,Er and Si‐NaYF4:Yb,Tm, for efficient photon‐conversion through Förster resonance energy transfer (FRET) with rose bengal (RB), a photosensitizer. We observed NIR‐induced electron transfer by using linear sweep voltammetric analysis; this indicates that photoexcited electrons of RB/Si‐NaYF4:Yb,Er are transferred to NAD+ through a Rh‐based electron mediator. RB/Si‐NaYF4:Yb,Er nanoparticles, which exhibit higher FRET efficiency due to more spectral overlap than RB/Si‐NaYF4:Yb,Tm, perform much better in the photoenzymatic conversion.     

Synthesis of hexagonal-phase core-shell NaYF4 nanocrystals with tunable upconversion fluorescence

Hexagonal-phase core-shell-structured NaYF 4:Yb,Tm@beta-NaYF 4:Yb,Er and beta-NaYF 4:Yb,Tm@beta-NaYF 4:Yb,Er@beta-NaYF 4:Yb,Tm nanocrystals were synthesized by a seeded growth approach. beta-NaYF 4:Yb,Tm nanocrystals with 20 nm diameter were used as seed crystals to induce the growth of beta-NaYF 4:Yb,Er and then beta-NaYF 4:Yb,Tm crystals, resulting in the formation of core-shell-structured nanocrystals with upconverting lanthanide ions Tm and Er doped in the core and shell, respectively.     

NaYF4∶Er3＋, Yb3＋纳米晶的液相合成

采用丙三醇液相结晶法制备了NaYF4∶Er3＋, Yb3＋上转换纳米晶, 合成步骤被简化. 常温下, 用980 nm的红外激光激发可以观察到很强的绿光、红光发射, 用荧光光谱仪记录了该上转换光谱. X射线粉末衍射(XRD)结果表明, 该方法制备NaYF4∶Er3＋, Yb3＋纳米晶属于立方混合六方晶系. 研究了纳米晶的上转换发光机理, 根据晶体场理论对Er3＋的两个上转换能级进行了Stark分裂计算, 对两个能级之间的谱线进行了归属, 进一步证实了980 nm光子激发Er3＋离子的上转换机理, 一个是连续吸收两个980 nm光子的过程(激发态吸收), 另一个是吸收980 nm光子后, 电子转移到亚稳态能级, 然后再吸收980 nm光子过程(能量转移上转换).     

Novel heterometal-organic complexes as first single source precursors for up-converting NaY(Ln)F4 (Ln = Yb, Er, Tm) nanomaterials

First heterometal-organic single source precursors for NaYF(4) nanomaterials as a host matrix for up-conversion emission are reported. These novel heterobimetallic derivatives NaY(TFA)(4)(diglyme) (1), [Na(triglyme)(2)][Y(2)(TFA)(7)(THF)(2)] (2) and Na(2)Y(TFA)(5)(tetraglyme) (3) (TFA = trifluoroacetate), which were fully characterized by elemental analysis, FT-IR and (1)H NMR spectroscopy, TG-DTA data as well as single crystal X-ray structures, are advantageous in terms of being anhydrous and having lower decomposition temperatures in comparison to the homometallic precursor Y(TFA)(3)(H(2)O)(3). In addition, they also contain chelating glyme ligands, which act as capping reagents during decomposition to control the NaYF(4) particle size and render them monodisperse in organic solvents. On decomposition in 1-octadecene, the molecular derivatives 1 and 3 are converted, in the absence of any surfactant or capping reagent, to cubic NaYF(4) nanocrystals at significantly lower temperatures (below 250 °C). At higher temperature, a mixture of the cubic and hexagonal phases was obtained, the relative ratio of the two phases depending on the reaction temperature. A pure hexagonal phase, which is many folds more efficient for UC emission than the cubic phase, was obtained by calcining nanocrystals of mixed phase at 400 °C. In order to co-dope this host matrix with up-converting lanthanide cations, analogous complexes NaLn(TFA)(4)(diglyme) [Ln = Er (4), Tm (5), Yb (6)] and Na(2)Ln(TFA)(5)(tetraglyme) [Ln = Er (7), Yb (8)] were also prepared and characterized. The decomposition in 1-octadecene of suitable combinations and appropriate molar ratios of these yttrium, ytterbium and erbium/thulium derivatives gave cubic and/or hexagonal NaYF(4): Yb(3+), Er(3+)/Tm(3+) nanocrystals (NCs) capped by diglyme or tetraglyme ligands, which were characterized by IR, TG-DTA data, EDX analysis and TEM studies. Surface modification of these NCs by ligand exchange reactions with poly acrylic acid (PAA) and polyethyleneglycol (PEG) diacid 600 was also carried out to render them water soluble. The THF solutions of suitable combinations of the diglyme derivatives were also used to elaborate the thin films of NaYF(4):Yb(3+), Er(3+)/Tm(3+) on a glass or Si wafer substrate by spin coating. The multicolour up-conversion fluorescence was successfully realized in the Yb(3+)/Er(3+) (green/red) and Yb(3+)/Tm(3+) (blue/violet) co-doped NaYF(4) nanoparticles and thin films, which demonstrates that they are promising UC nanophosphors of immense practical interest. The up-conversion excitation pathways for the Er(3+)/Yb(3+) and Tm(3+)/Yb(3+) co-doped materials are discussed.     

六方相NaYF4:Yb/Er纳米晶制备方法研究进展

综述了六方相NaYF4:Yb/Er纳米晶的制备方法,着重总结了三氟乙酸盐热分解法、共沉淀法、碳酸盐热分解法、离子热法、水热法及两步法的研究进展,并就其发展前景进行了展望.     

A NIR-responsive up-conversion nanoparticle probe of the NaYF4:Er,Yb type and coated with a molecularly imprinted polymer for fluorometric determination of enrofloxacin

Microchimica Acta - The paper describes the preparation of a fluorescent probe based on the use of up-conversion particles (UCPs) of the type NaYF4: Er, Yb and shelled with a molecularly imprinted...     

Rare-Earth nanoparticles with enhanced upconversion emission and suppressed rare-Earth-ion leakage

Upconversion emissions from rare-earth nanoparticles have attracted much interest as potential biolabels, for which small particle size and high emission intensity are both desired. Herein we report a facile way to achieve NaYF(4):Yb,Er@CaF(2) nanoparticles (NPs) with a small size (10-13 nm) and highly enhanced (ca. 300 times) upconversion emission compared with the pristine NPs. The CaF(2) shell protects the rare-earth ions from leaking, when the nanoparticles are exposed to buffer solution, and ensures biological safety for the potential bioprobe applications. With the upconversion emission from NaYF(4):Yb,Er@CaF(2) NPs, HeLa cells were imaged with low background interference.