Selective dissolution of the silver component in colloidal Au and Ag multilayers: a facile way to prepare nanoporous gold film materials

Colloidal Au/Ag multilayer films were prepared by alternate assembly of Au nanoparticles with a size of 5 +/- 1.2 nm and Ag nanoparticles with a size of 10 +/- 2.4 nm by using 1,5-pentanedithiol as cross-linker. Nanoporous gold films with a ligament size of 26.7 +/- 4.6 nm were then prepared by selective dissolution of sacrificial templates of silver particles in colloidal Au/Ag multilayers. The complete dissolution of Ag particles in colloidal Au/Ag multilayers in a mixture solution of 3.0 mM HAuCl(4) and 3 M NaCl took place at room temperature without damage of the colloidal Au film. This method to prepare nanoporous gold films was further extended to the preparation of nanoporous gold nanotubes by depositing colloidal Au/Ag film on the inner wall of anodic aluminum oxides (AAO) followed by dissolution of colloidal Ag and removal of AAO templates.     

微波法合成纳米金胶体颗粒的调控研究

用微波法制备高分子聚合物稳定的纳米金胶体颗粒, 制得的金纳米颗粒的平均粒径在5～120 nm之间. 考察了醇还原剂以及碱对金颗粒形成的影响, 使用透射电子显微镜、紫外可见分光光度计进行表征. 结果表明, 微波法制备的金胶体颗粒具有粒径小、分散性好的特点. 金颗粒的尺寸和形状随醇还原剂的种类及碱(NaOH)用量的不同而有明显的变化. 紫外可见吸收光谱表明, 在反应物中加入碱的体系, 金颗粒的形成速度明显加快, 且利于圆球形金颗粒的形成.     

A facile synthesis and characterization of Ag, Au and Pt nanoparticles using a natural hydrocolloid gum kondagogu (Cochlospermum gossypium)

An environmentally benign method for the synthesis of noble metal nanoparticles has been reported using aqueous solution of gum kondagogu (Cochlospermum gossypium). Both the synthesis, as well as stabilization of colloidal Ag, Au and Pt nanoparticles has been accomplished in an aqueous medium containing gum kondagogu. The colloidal suspensions so obtained were found to be highly stable for prolonged period, without undergoing any oxidation. SEM-EDXA, UV-vis spectroscopy, XRD, FTIR and TEM techniques were used to characterize the Ag, Au and Pt nanoparticles. FTIR analysis indicates that -OH groups present in the gum matrix were responsible for the reduction of metal cations into nanoparticles. UV-vis studies showed a distinct surface plasmon resonance at 412 and 525 nm due to the formation of Au and Ag nanoparticles, respectively, within the gum network. XRD studies indicated that the nanoparticles were crystalline in nature with face centered cubic geometry. The noble metal nanoparticles prepared in the present study appears to be homogeneous with the particle size ranging between 2 and 10 nm, as evidenced by TEM analysis. The Ag and Au nanoparticles formed were in the average size range of 5.5±2.5 nm and 7.8±2.3 nm; while Pt nanoparticles were in the size range of 2.4±0.7 nm, which were considerably smaller than Ag and Au nanoparticles. The present approach exemplifies a totally green synthesis using the plant derived natural product (gum kondagogu) for the production of noble metal nanoparticles and the process can also be extended to the synthesis of other metal oxide nanoparticles.     

共振散射光强度与金粒子粒径的关系

采用柠檬酸钠还原法制备了不同粒径的金粒子,并研究了金粒子的共振散射光谱.结果表明,金粒子在粒径10～95nm范围内呈红色,最大吸收波长在517.8～553.3nm范围内.随着金粒子粒径增大,吸收峰红移.粒径为10～95nm金粒子的最强共振散射峰位于580nm处,此波长处的共振散射光强度³√I与金粒子粒径d成正比.     

Rapid room temperature synthesis of electrocatalytically active Au nanostructures

We describe a facile route for the one-pot room temperature synthesis of anisotropic Au nanostructures in aqueous solution in the absence of seeds or surfactants and their electrocatalytic activity. The Au nanostructures were synthesized using piperazine derivatives 1-(2-hydroxyethyl)piperazine and 1,4-Bis(2-hydroxyethyl)piperazine as reducing agents. The Au nanostructures were characterized by spectral, transmission electron microscopic (TEM), X-ray diffraction and electrochemical measurements. The absorption spectrum of colloidal nanoparticles displays two bands ~580 and ~930 nm, corresponding to the dipole and quadrupole plasmon resonance, respectively. TEM measurements show that the Au nanostructures have penta-twined polyhedral shape with an average size of 52 nm. X-ray and selected area electron diffraction patterns reveal the existence of face centered cubic nanocrystalline Au. The concentration of Au(III) controls the stability of the nanoparticles. The nanoparticles were immobilized on 3-D silicate network pre-assembled on a conducting support to examine their electrocatalytic activity. The nanoparticle-based electrochemical interface was characterized by spectral, voltammetric and impedance measurements. The nanoparticle shows high catalytic activity in the oxidation of NADH and reduction of oxygen. Unique inverted 'V' shape voltammogram was obtained for the oxidation of NADH at less positive potential. The nanoparticle-based interface favors two-step four-electron reduction of oxygen to water in neutral pH. Significant decrease in the overpotential for the oxidation of NADH and reduction of oxygen with respect to the polycrystalline Au electrode was observed. The electrocatalytic performance of the polyhedral nanoparticle is compared with the conventional citrate stabilized spherical nanoparticles.     

金纳米粒子的非线性共振散射及光强度函数研究

液相金纳米粒子在320nm、470nm、580nm720nm处产生四个共振散射峰。它是一种非线性光学介质,当入射光的频率v不同时可获得金纳米粒子的2v倍频、v/2分频、v/3分频、2v/3 分频、3v／2分频散射峰。探讨了影响液相金纳米粒子散射光信号强度I（λ）的主要因素即散射光能量分布、粒径d、△λ（λem-λex)和散射光辐射度Rλex。给出了共振散射光强度与△λ之间的高斯分布函数。建立了一个合理的金纳米粒子的共振散射光强度函数。     

Synthesis, characterization and SERS activity of Au-Ag nanorods

The formation mechanism and morphology of Au-Ag bimetallic colloidal nanoparticles depend on the composition. Ag coated Au colloidal nanoparticles have been prepared by deposition of Ag through chemical reduction on performed Au colloid. The composition of the Au(100-x)-Ag(x) particles was varied from x=0 to 50. The obtained colloids were characterized by UV-vis spectroscopy and transmission electron microscopy (TEM). The Au(80)-Ag(20) colloid consists of alloy nanorods with dimension of 25nmx100nm. The activity of these nanorods in surface enhanced Raman spectroscopy (SERS) was checked by using sodium salicylate as an adsorbate probe. Intense SERS bands are observed indicating its usefulness as a SERS substrate in near infrared (NIR) laser excitation.     

金核银壳纳米粒子薄膜的制备及SERS活性研究

采用柠檬酸化学还原法制备金溶胶, 通过自组装技术在石英片表面制备金纳米粒子薄膜, 在银增强剂混合溶液中反应获得金核银壳纳米粒子薄膜. 用紫外-可见吸收光谱仪和原子力显微镜(AFM)研究了不同条件下制备的金核银壳纳米粒子薄膜的光谱特性和表面形貌, 并以结晶紫为探针分子测量了金核银壳纳米粒子薄膜的表面增强拉曼光谱(SERS). 结果表明, 金纳米粒子薄膜的分布、银增强剂反应时间的长短对金核银壳纳米粒子薄膜的形成均有重要影响. 制备过程中, 可以通过控制反应条件获得一定粒径的、具有良好表面增强拉曼散射活性的金核银壳纳米粒子薄膜.     

Gold-Titanium(IV) Oxide Plasmonic Photocatalysts Prepared by a Colloid-Photodeposition Method: Correlation Between Physical Properties and Photocatalytic Activities

Colloidal gold (Au) nanoparticles were prepared and successfully loaded on titanium(IV) oxide (TiO(2)) without change in the original particle size using a method of colloid photodeposition operated in the presence of a hole scavenger (CPH). The prepared Au nanoparticles supported on TiO(2) showed strong photoabsorption at around 550 nm due to surface plasmon resonance (SPR) of Au and exhibited a photocatalytic activity in mineralization of formic acid in aqueous suspensions under irradiation of visible light (>ca. 520 nm). A linear correlation between photocatalytic activity and the amount of Au loaded, that is, the number of Au nanoparticles, was observed, indicating that the activity of Au/TiO(2) plasmonic photocatalysts can be controlled simply by the amount of Au loading using the CPH method and that the external surface area of Au nanoparticles is a decisive factor in mineralization of formic acid under visible light irradiation. Very high reaction rates were obtained in samples with 5 wt % Au or more, although the rate tended to be saturated. The CPH method can be widely applied for loading of Au nanoparticles on various TiO(2) supports without change in the original size independent of the TiO(2) phase. The rate of CO(2) formation also increased linearly with increase in the external surface area of Au. Interestingly, the TiO(2) supports showed different slopes of the plots. The slope is important for selection of TiO(2) as a material supporting colloidal Au nanoparticles.     

Rapid one-step synthesis, characterization and functionalization of silica coated gold nanoparticles

This paper describes a rapid, simple and one-step method for preparing silica coated gold (Au@SiO₂) nanoparticles with fine tunable silica shell thickness and surface functionalization of the prepared particles with different groups. Monodispersed Au nanoparticles with a mean particle size of 16 nm were prepared by citrate reduction method. Silica coating was carried out by mixing the as prepared Au solution, tetraethoxysilane (TEOS) and ammonia followed by microwave (MW) irradiation. Although there are several ways of coating Au nanoparticles with silica in the literature, each of these needs pre-coating step as well as long reaction duration. The present method is especially useful for giving the opportunity to cover the colloidal Au particles with uniform silica shell within very short time and forgoes the use of a silane coupling agent or pre-coating step before silica coating. Au@SiO₂ nanoparticles with wide range of silica shell thickness (5-105 nm) were prepared within 5 min of MW irradiation by changing the concentration of TEOS only. The size uniformity and monodispersity were found to be better compared to the particles prepared by conventional methods, which were confirmed by dynamic light scattering and transmission electron microscopic techniques. The prepared Au@SiO₂ nanoparticles were further functionalized with amino, carboxylate, alkyl groups to facilitate the rapid translation of the nanoparticles to a wide range of end applications. The functional groups were identified by XPS, and zeta potential measurements.     

Surface-enhanced Raman studies of bradykinin using colloidal gold

In this paper, bradykinin (BK), an endogenous peptide hormone, which is involved in a number of physiological and pathophysiological processes was deposited onto the colloidal Au nanoparticles. The surface-enhanced Raman spectroscopy (SERS) was used to determine the adsorption mode of BK under different environmental conditions, including: excitation wavelengths (514.5 nm and 785.0 nm), pH of aqueous sol solutions (from pH = 3 to pH = 11), and size of the colloidal nanoparticles (10, 20, and 50 nm). The metal surface plasmon of the colloidal suspended Au nanoparticles was examined by ultraviolet-visible (UV–vis) spectroscopy. The results showed that the C-terminal part of BK plays a crucial role in the adsorption process onto the colloidal suspended Au particles. The Phe^5/8 and Arg⁹ residues of BK mainly participate in the interactions with the colloidal Au nanoparticles. At acidic pH of the solution (pH = 3), the BK COO⁻ terminal group through the both oxygen atoms strongly binds to the Au nanoparticles. The Phe⁵/Phe⁸ rings adopt tilted orientation with respect to the colloidal Au nanoparticles with diameters of 10 and 20 nm. As the particle size increases to 50 nm, the flat orientation of the Phe ring(s) with respect to the Au nanoparticles is observed.     

金纳米颗粒的水相法合成及荧光性能

在水溶液中,以PAMAM树形分子为模板,乙醇为还原剂,制备了树形分子包裹的金纳米颗粒,其水溶性好,可以稳定放置1年以上;通过控制Au3+与PAMAM树形分子的摩尔比,可以得到粒径可控的金纳米颗粒,其粒径范围为1～4nm,分别在385和402nm处出现强的共振瑞利光散射峰和荧光峰.室温下,荧光量子产率达到10%以上,比其它文献报道的金纳米颗粒的荧光量子产率高2个数量级以上,这一特性使其在潜指纹识别、光催化等方面具有很大的应用潜力.     

Surfactant enhanced lipase containing films characterized by confocal laser scanning microscopy

An environmentally benign method for the synthesis of noble metal nanoparticles has been reported using aqueous solution of gum kondagogu (Cochlospermum gossypium). Both the synthesis, as well as stabilization of colloidal Ag, Au and Pt nanoparticles has been accomplished in an aqueous medium containing gum kondagogu. The colloidal suspensions so obtained were found to be highly stable for prolonged period, without undergoing any oxidation. SEM–EDXA, UV–vis spectroscopy, XRD, FTIR and TEM techniques were used to characterize the Ag, Au and Pt nanoparticles. FTIR analysis indicates that –OH groups present in the gum matrix were responsible for the reduction of metal cations into nanoparticles. UV–vis studies showed a distinct surface plasmon resonance at 412 and 525 nm due to the formation of Au and Ag nanoparticles, respectively, within the gum network. XRD studies indicated that the nanoparticles were crystalline in nature with face centered cubic geometry. The noble metal nanoparticles prepared in the present study appears to be homogeneous with the particle size ranging between 2 and 10 nm, as evidenced by TEM analysis. The Ag and Au nanoparticles formed were in the average size range of 5.5 ± 2.5 nm and 7.8 ± 2.3 nm; while Pt nanoparticles were in the size range of 2.4 ± 0.7 nm, which were considerably smaller than Ag and Au nanoparticles. The present approach exemplifies a totally green synthesis using the plant derived natural product (gum kondagogu) for the production of noble metal nanoparticles and the process can also be extended to the synthesis of other metal oxide nanoparticles.     

Reversible Synthesis of Sub‐10 nm Spherical and Icosahedral Gold Nanoparticles from a Covalent Au(CN)2− Precursor and Recycling of Cyanide to form Ferric Ferrocyanide for Cell Staining

A solution approach based on Au(CN)₂^? chemistry is reported for the formation of nanoparticles. The covalent character of the Au(CN)₂^? precursor was exploited in the formation of sub‐10 nm nanospheres (≈2.4 nm) and highly monodisperse icosahedral Au nanoparticles (≈8 nm) at room temperature in a one‐pot aqueous synthesis. The respective spherical and icosahedral Au morphologies can be controlled by either the absence or presence of the polymer polyvinylpyrrolidone (PVP). Using Au(CN)₂^? as a metal ion source, our findings suggest that the addition of citrate ions is necessary to enhance the particle formation rate as well as to generate a more homogeneous colloidal dispersion. Because of the presence of oxygen and the operation of a CN^? etching process associated with Au(CN)₂^? complex formation, an interesting reversible formation–dissolution process was observed, which allowed us to repeatedly prepare spherical and icosahedral Au nanoparticles. Time‐dependent TEM images and UV/Vis spectra were carefully acquired to study the reversibility of this formation–dissolution process. In view of the accompanying generation of toxic cyanide anions, we have developed a protocol to recycle cyanide in the presence of citrate ions through ferric ferrocyanide formation. After completion of particle formation, the residual solutions containing citrate ions and cyanide ions were processed to stain iron oxide nanoparticles endocytosized in cells. Additionally, the as‐prepared 8 nm Au icosahedra could be isolated and grown to larger 57 nm‐sized icosahedra using the seed‐mediated growth approach.     

Preparation of functionally Pegylated gold nanoparticles with narrow distribution through autoreduction of auric cation by alpha-biotinyl-PEG-block-[poly(2- (N,N-dimethylamino)ethyl methacrylate)

PEGylated gold nanoparticles with biotin moieties installed at the distal end of the PEG tethered chains were prepared by the autoreduction of HAuCl4 catalyzed by alpha-biotinyl-PEG-block-poly[2-(N,N-dimethylamino)ethyl methacrylate] (biotinyl-PEG/PAMA) in aqueous medium at room temperature. The size of the gold nanoparticles was controllable in a range of 6-13 nm by changing the initial Au3+/polymer ratio, while retaining their narrow size distribution. The dispersion stability of the nanoparticles in aqueous medium was extremely high even under the condition of salt concentration as high as I = 2.0. Biotinyl-PEG/PAMA-anchored gold nanoparticles underwent specific aggregation in the presence of streptavidin, revealing their promising utility as colloidal sensing systems applicable under biological condition.     

A new preparation method of gold nanoparticles by intra-reduction of sodium gold（I） sulfite

In this study, well-dispersed gold nanoparticles were prepared by using intra-molecular reduction of sodium gold sulfite, without using additional reductants and chloride free. The technical parameters including transformation temperature, pH, and concentration were optimized by the single-factor method as 90 C, pH 1, and 0.01 mmol/L [Na3Au（SO3）2], respectively. The resultant colloidal transmission electron microscopy images （TEM） and UV-vis absorption spectrophotometer spectra were acquired to check their properties, and the results show this kind of colloidal gold is controlled to 6 nm in sizes and has good stability in solution.     

利用纳米离子组装的方法制备SERS活性基底

A simple method for fabricating SERS-active substrate using Au nanoparticles is reported. HSCH2CH2NH2 was self-assembled on the Au/glass substrate, then nanoparticles of colloidal gold were bound to the surface. The SERS effect of such prepared substrate was studied by using BPE and an azobenzene thiol derivated compound and the SERS enhanced factor was found about 3×103.     

Macroporous Au materials prepared from colloidal crystals as templates

In this paper, we reported the preparation of macroporous Au materials using organic colloidal crystals as templates and their catalytic activity for electroless copper deposition. The poly(styrene-methyl methacrylate-acrylic acid) (P(St-MMA-AA)) copolymer colloids were deposited in an orderly manner onto the silicon surface, together with the infiltration of the Au nanoparticles into the interspaces of the colloids. The formed hybrid colloidal crystal subsequently was sintered at approximately 550 degrees C to remove the organic components fully to obtain a macroporous Au framework with three-dimensional ordered porous structure. The pore diameter was around 310 nm and almost monodisperse. It was demonstrated that the macroporous Au materials exhibit catalytic activity and can induce electroless copper deposition.     

Synthesis of core/shell nanoparticles of Au/CdSe via Au-Cd bialloy precursor

We present a novel method for the preparation of ultrasmall Au/CdSe core/shell particles. Au-Cd bialloy particles of 4.7 nm diameter were prepared as the precursor. The Cd component in the precursor reacted with the Se source at a temperature of 205 degrees C and was heated to 250 degrees C, leading to formation of a Au/CdSe core/shell structure. The sizes of Au/CdSe nanoparticles have a narrow distribution with an average size of 6.0 nm and Au core of 2.2 nm diameter. The X-ray diffraction pattern and the images of the high-resolution electron transmission microscopy show that the Au cores and the CdSe shells of Au/CdSe core/shell nanoparticles are both well crystallized, and the CdSe shells are in a cubic phase. The absorption spectrum of the Au/CdSe nanoparticles combines the absorption behaviors of the Au cores and the CdSe shells.     

Synthesis, characterization, and self-assembly of protein lysozyme monolayer-stabilized gold nanoparticles

Lysozyme monolayer-protected gold nanoparticles (Au NPs) which are hydrophilic and biocompatible and show excellent colloidal stability (at low temperature, ca. 4 degrees C), were synthesized in aqueous medium by chemical reduction of HAuCl4 with NaBH4 in the presence of a familiar small enzyme, lysozyme. UV-vis spectra, transmission electron microscopy (TEM), atomic force microscopy, and X-ray photoelectron spectroscopy characterization of the as-prepared nanoparticles revealed the formation of well-dispersed Au NPs of ca. 2 nm diameter. Moreover, the color change of the Au NP solution as well as UV-vis spectroscopy and TEM measurements have also demonstrated the occurrence of Ostwald ripening of the nanoparticles at low temperature. Further characterization with Fourier transform infrared spectroscopy (FTIR) and dynamic light scattering indicated the formation of a monolayer of lysozyme molecules on the particle surface. FTIR data also indicated the intactness of the protein molecules coated on Au NPs. All the characterization results showed that the monodisperse Au NPs are well-coated directly with lysozyme. Driven by the dipole-dipole attraction, the protein-stabilized Au NPs self-assembled into network structures and nanowires upon aging under ambient temperature. On the basis of their excellent colloidal stability, controlled self-assembly ability, and biocompatible surface, the lysozyme monolayer-stabilized Au NPs hold great promise for being used in nanoscience and biomedical applications.