以一种新型Gemini表面活性剂作为介孔模板剂通过转晶过程合成介孔ZSM-5分子筛

将一种新型Gemini表面活性剂,丙撑基双(十八烷基二甲基氯化铵)[C18H37(CH3)2–N+–(CH2)3–N+–(CH3)2C18H37]Cl2(C18-3-18),作为介孔模板剂用于水热法合成介孔ZSM-5分子筛.结果表明,在130 oC低温晶化即可高效合成介孔ZSM-5分子刷.C18-3-18的加入量可影响到所合成介孔ZSM-5分子筛的相对结晶度和织构性质,它的形成遵从一个转晶过程.在合成初期,凝胶中介孔模板剂C18-3-18的使用导向了介孔材料的生成;随后在TPABr的模板作用下,介孔材料慢慢转晶生成具有MFI结构的介孔ZSM-5;然后所合成的介孔ZSM-5晶粒进一步长大并聚集形成块状颗粒,同时产生晶间介孔.C18-3-18作为介孔导向剂不仅可用于合成介孔ZSM-5分子筛,也可用于其它介孔分子筛的合成中.     

高岭土原位无溶剂法合成小粒径ZSM-5分子筛

结合原位水热法和无溶剂法的优点,在不添加有机模板剂和溶剂的基础上,以高岭土为原料通过晶种诱导绿色高效地合成出ZSM-5分子筛。运用X射线衍射、N2吸附-脱附、扫描电镜、透射电镜和NH3程序升温脱附(TPD-NH3)等技术对ZSM-5分子筛进行表征。表征结果与原位水热法合成的ZSM-5分子筛相比,原位无溶剂法合成ZSM-5分子筛的结晶度较高、晶体粒径较小、酸强度略高、孔结构相似。     

非碱性介质中合成ZSM-39型分子筛

自1981年Brace报导ZSM-39分子筛合成工作之后,人们在用不同有机胺模板剂合成ZSM-39分子筛方面做了很多工作.并在甲胺存在下,加晶种的方法得到了全硅ZSM-39单晶.目前合成ZSM-39的报道都是在碱性体系进行,Guth等报道了在非碱性介质中合成ZSM-5的新途径,认为全硅ZSM-5孔道内模板剂是以TPAF形式存在.本工作在非碱性介质中,F离子存在下,合成出ZSM-39分子筛,得到了全硅ZSM-39大单晶,并对其结构进行了测定.     

以十六烷基三甲基溴化铵为模板剂合成MCM-41/ZSM-5复合分子筛的研究

采用阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)为模板剂、以ZSM-5为晶种,在水热晶化条件下合成了同时具有微孔和介孔的MCM-41/ZSM-5复合分子筛;并考察了陈化温度、陈化时间、晶化时间及模板剂用量等条件对合成复合分子筛的影响.通过X射线衍射、扫描电镜、高分辨率透射电镜、红外光谱及N2静态吸附法等手段对合成样...     

两段变温法水热合成多级孔ZSM-5分子筛及其催化裂化性能（英文）

以四丙基氢氧化铵(TPAOH)为单一模板剂,采用低温老化、高温晶化2段变温法合成出了球状多级孔ZSM-5分子筛。利用XRD、FT-IR、NH_3-TPD、SEM、TEM以及氮气吸-脱附等测试对合成样品进行了表征。结果表明:直径约为2μm左右的球状多级孔ZSM-5分子筛颗粒内的晶间介孔和大孔主要由棒状纳米晶堆积而成的,该产品具有较大的比表面积和介孔孔容。同常规水热法一步合成的微孔ZSM-5分子筛相比,2段变温法合成的多级孔ZSM-5分子筛具有更高的B酸/L酸比例(C_(BP)/C_(LP))、强酸/弱酸比例(C_s/C_w)以及活性位可接近性指数(ACI)。催化裂化评价结果显示,得益于活性位可接近性指数等指标的提高,球状多级孔ZSM-5分子筛比常规合成的微孔ZSM-5分子筛具有更高的转化率和丙烯收率等优异的催化性能。     

多级孔HZSM-5分子筛的制备及其催化合成聚甲氧基二甲醚的性能

采用两步结晶法,用不同硅源铝源在无介孔模板剂的情况下,直接合成具有多级孔结构的ZSM-5分子筛;利用XRD、SEM、N₂吸附/脱附、Py-IR等技术对合成的多级孔ZSM-5分子筛结构、形貌、织构和酸性质进行表征,并考察其催化甲缩醛和三聚甲醛合成聚甲氧基二甲醚(PODE)的催化性能。结果表明：硅源铝源会影响分子筛结晶过程的晶体尺寸,粒径小的纳米粒更容易相互堆叠形成晶间孔隙;以正硅酸乙酯为硅源,分别以硝酸铝、偏铝酸钠和硫酸铝为铝源合成的3个多级孔ZSM-5分子筛具有较大的介孔体积和较高的B酸/L酸值,在催化合成PODE反应中表现出较好的催化性能;三者对三聚甲醛的转化率均达90%以上,对PODE_3~8选择性分别为62.22%、62.35%和62.12%。      

多级孔ZSM-5分子筛的制备及其在炼油领域中的应用

多级孔ZSM-5分子筛结合了微孔分子筛可调变的酸性、良好的水热稳定性以及介孔材料优异的传质扩散性能,在催化领域有着广阔的应用前景.我们综述了近年来多级孔ZSM-5分子筛的研究进展,重点概述了多级孔ZSM-5分子筛的不同制备方法,包括后处理法、硬模板法和软模板法等,同时介绍了多级孔ZSM-5分子筛在炼油领域的应用研究,并在上述基础上对多级孔ZSM-5分子筛的研究趋势进行了展望.     

ZSM-5分子筛生成中的模板效应——Ⅴ.反应混合物中铝含量对ZSM-5和ZSM-11分子筛生成的影响

以TBA~+为模板剂在六种不同的体系中合成了ZSM-5和ZSM-11分子筛。考察了反应混合物中Al_2O_3含量对产物中ZSM-5和ZSM-11分子筛的相对含量及其晶化速度的影响。在此基础上,提出了ZSM-5和ZSM-11分子筛三维骨架的形成步骤,较好地解释了实验现象。     

多级孔ZSM-5分子筛的合成及其在甲醇脱水制二甲醚反应中的应用

以四丙基氨为微孔模版剂,阳离子高分子聚合物为介孔模版剂,合成了具有多级介孔的ZSM-5分子筛,并用于甲醇气相脱水合成二甲醚.结果表明,加入阳离子高分子聚合物后,合成的HZSM-5分子筛样品既保持了其MFI典型结构,又呈现了多级介孔特征;随着阳离子高分子聚合物模板剂加入量的增加,其多级介孔特征更为明显.具有多级介孔的HZSM-5分子筛表现出比常规微孔HZSM-5分子筛高的反应稳定性和二甲醚选择性,这主要是由于其织构和酸性的双重作用.     

Pr3N—ZSM—5分子筛的合成与表征

硅铝酸盐分子筛的合成一般采用水热晶化法,反应混台物的pH值大于10,并且体系中含有金属离子,分子筛原粉必须通过铵离子交换和焙烧才能转变为氢型催化剂,1986年,Guth等人曾在非碱性介质含氟体系中,在加晶种条件下以三丙胺为模板剂得到ZSM-5分子筛,文献报道的ZMS-5分子筛大单晶的合成均采用四丙基铵离子作模板剂,尚未见到用其它有机分子作为模板剂合成ZMS-5大单晶的报道,我们在非碱性介质含氟体系中以三丙胺直接合成出ZSM-5分子筛,并得到了大单晶。用多种实验技术对三丙胺在ZSM-5分子筛中的存在状态进行了表征。     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.     

Catalyst free,visible-light promoted photoaddition reactions between C60 and N-trimethylsilylmethyl-substituted tertiary amines for synthesis of aminomethyl-1,2-dihydrofullerenes

An efficient and benign method for the preparation of aminomethyl-substituted fullerenes has been developed. The process, involving catalyst free, visible-light irradiation of 10% EtOH-toluene solutions containing fullerene C₆₀ and N-trimethylsilylmethyl-substituted amines by using a 20 W compact fluorescent lamp, leads to formation of aminomethyl-substituted fullerene adducts in a highly efficient manner. The photoaddition reaction takes place via a pathway initiated by visible light absorption by C₆₀, followed by SET from the amine to the triplet excited state of C₆₀. Ethanol-promoted desilylation of the resulting a minimum radical then generates the corresponding α-amino radical which couples with the C₆₀ radical anion to form the anion precursor of the fullerene adducts. The new approach using visible-light takes place under mild conditions and it does not require the use of photocatalysts. Thus, the method developed in this effort could broadens the range of functionalized fullerene derivatives that can be readily prepared.     

Highly efficient and stereoselective cycloaddition of nitrones to indolyl- and pyrrolylacrylates

The reactions of various nitrones with indolyl- and pyrrolylacrylates proceeds regioselectively with high diastereoselectivity in the case of aldonitrones, and represents an effective method for obtaining new indolyl- and pyrrolyl-substituted isoxazolidine carboxylates stabilized by weak (CH?O) and moderate (NH?N) strength intramolecular hydrogen bonding. The resulting cycloadducts exhibit promising in vitro anti-influenza activities.     

Transition metal-free direct amination of benzoxazoles using formamides as nitrogen sources

A transition metal-free method for the direct amination of benzoxazoles using formamides as nitrogen sources is reported, which was mediated by an inexpensive and environmentally friendly tetrabutylammonium iodide/tert-butyl hydroperoxide system and gave the 2-aminobenzoxazole derivatives with moderate to good yields.     

l-Proline-catalyzed five-component domino reaction leading to multifunctionalized 1,2,3,4-tetrahydropyridines

Multifunctionalized 1,2,3,4-tetrahydropyridines are concisely synthesized in good yields via l-proline-catalyzed or l-proline/FeCl₃-cocatalyzed one-pot multicomponent reactions (MCRs). The MCRs involve a domino hydroamination/prins reaction/Mannich-type reaction/intramolecular dehydration-cyclization process. The molecular structure of 5baa, one of multifunctionalized 1,2,3,4-tetrahydropyridines, was confirmed by single-crystal X-ray diffraction.     

Studies of Photoionization of CF3 I by Femtosecond Time-resolved Mass Spectrometry

The multi-photon dissociative photoionization dynamics of CF3I has been studied with femtosecond two-color pump-probe time of flight mass spectra at a pump pulse of 265 nm and a probe pulse of 398 nm. The life constants of CF3I+ and its fragment ions CF3+ and I+ are obtained as (96±7), (198±130) and (167±6)fs, respectively. The multi-photon dynamics leading to these ions differ. CF3I+ corresponds to a (1+2′) transition with one-photon pump excitation to the A band of CF3I. CF3+ are mainly formed by a tow-photon probe excitation to the CF3+ with subsequent dissociation of parent ions. I+ are produced in (2+2′) combined with (1+1′+2′) process. The results provide information on the multi-photon pathways involved.