较为宽松条件下水热合成铁酸铋粉体

Bismuth ferrite(BiFeO₃) powders were hydrothermally synthesized by using FeCl₃·6H₂O and BiCl₃ as staring materials, NaOH as a mineralizer and NH₄Cl as an additive. The results show that pure BiFeO₃ powders can be synthesized under loose hydrothermal conditions of reaction temperature ranging from 140 to 230 ℃ and NaOH concentration ranging from 2 mol·L^-1 to 5 mol·L^-1. Moreover, the morphologies of the products can be controlled by changing the hydrothermal conditions.     

水溶液中新型四氮杂二乙酸基取代大环及其镧系配合物的热力学研究

The protonation constants of the macrocycle H₂L¹ (c-meso-2,4,4,11,13,13-hexamethyl-1,5,10,14-tetraazacyclooctadecane-N,N＂-diacetic acids)were determined potentiometricly and by computer fitting in 0.5 mol·L^-1 KNO₃ solution at 25±0.1℃, 30±0.1℃ and 40±0.1℃. The stability constants of the 1∶1 complexes of H₂L¹ with La³⁺, Nd³⁺, Sm³⁺, Eu³⁺, Gd³⁺, Dy³⁺, Yb³⁺ were determined by the same method at 40±0.1℃. The ΔH、 ΔS and ΔG of the coodination reaction of H₂L¹ with H⁺ in the aqueous solution were found.     

类普鲁士蓝为前驱体制备纳米NiO及其电化学电容行为

Nanosized nickel oxide was synthesized by immersing the precursor NiHCNFe into 1 mol·L^-1 KOH solution to obtain nickel hydroxide (Ni(OH)₂) and then annealing in air at 300 ℃. X-ray diffraction (XRD) and transmission electron microscopy (TEM) tests showed the prepared samples were rhombohedral crystalline structure of NiO with uniform grain and with a diameter of about 8 nm. Electrochemical properties of NiO were examined by cyclic voltammetry, ac impedance and galvanostatic charge-discharge tests. The results demonstrated that nickel oxide had a good capacitive behavior and cyclability due to its nanostructure. The highest specific capacitance of nickel oxide was about 303 F·g^-1 at a charge/discharge current density of 5 mA·cm^-2 in 6 mol·L^-1 KOH solution.     

金表面有机膦酸锆多层膜在不同支持电解质溶液中的稳定性

Zirconium 1,4-butylenediphosphonate[Zr(BDPA)] multilayers on a 3-mercaptopropylphosphonate-coated gold electrode were prepared by the conventional layer-by-layer method. The stability of the Zr(BDPA) multilayers in different supporting electrolyte solutions was studied by cyclic voltammetry(CV) and X-ray photoelectron spectroscopy(XPS) measurements. The results show that the Zr(BDPA) multilayers are very stable in 0.2 mol·L^-1 KCl, 0.2 mol·L^-1 KNO₃ and low concentration phosphate buffer solution(PBS) with low pH values(c≤0.05 mol·L^-1, pH≤6.8). While in high concentration 0.2 mol·L^-1 PBS(pH=5.2～7.4), the Zr(BDPA) multilayers will be partially desorbed within two days, possibly due to the formation of more stable zirconium phosphate.     

Extraction and Preconcentration of the Herbicide Glyphosate and its Metabolite AMPA Using Anion-Exchange Solid Phases

An extraction and preconcentration method has been developed for the determination of glyphosate and its degradation product, aminomethylphosphonic acid (AMPA), over a broad range of concentrations (0.1–500 μg · L⁻¹) in various aqueous matrices which differ in their ionic content. Two anion-exchange resins (the microporous Amberlite^?IRA-416 and the macroporous Amberlite^?IRA-900) and a commercial silica modified cartridge, ISOLUTE-NH₂, were evaluated and compared. The effect of flow-rate, composition and volume of the elution solution, analyte concentration, sample volume and porosity of the sorbents were investigated and the best experimental conditions were then used in the recovery of the analytes from spiked natural waters. Determination of the analytes was performed by HPLC with fluorescence detection, using FMOC-Cl as a pre-column derivatisation agent. Enrichment factors of up to 125 were achieved with the protonated ISOLUTE-NH₂ cartridge allowing the determination of glyphosate at a level of 0.1 μg · L⁻¹. Recovery rates of 99% for glyphosate and 77% for AMPA and relative standard deviations for repeatability of <10% for both analytes were determined with the Amberlite^?IRA-900 macroporous resin.     

具有超大通道结构的介孔氧化硅柱层状钛酸的合成和催化应用初探

A mesoporous (d=2.3mm) silica-pillared layered tetratitanate with a super gallery (d₀₀₁=1.84mm)was prepared by first preswelling layered tetratitanate with n-dodecyl amine, then reacting with 20wt% NH₂(CH₂)₃Si(OC₂H₅)₃ aqueous solution, and finally calcinating the resultant solid product in air at 550℃. All the reaction was carried out hydrothermally in an autoclave at 130℃. The obtained material has a relatively high BET surface area of 204m²·g^-1 and a thermal stability beyond 600℃. The catalytic application of the material was also investigated by using the dehydration of isopropanol and the reform of n-hexane as two probing reactions.     

纳米氧化锰电极材料的制备和电容特性研究

The nano-MnO₂ as active electrode material for supercapacitor was synthesized by solid-state reaction between KMnO₄ and manganese acetate at room temperature. The products annealed at 100 ℃ and 200 ℃ were characterized by XRD and TEM. The results showed the sample annealed at 100 ℃ was poorly crystallized phase with an average grain size of <20 nm. Electrochemical performances of manganese oxide electrode were investigated by cyclic voltammetry and constant current charge/discharge. The manganese oxide electrode annealed at 100 ℃ in 1 mol·L^-1 Na₂SO₄ aqueous electrolyte exhibited excellent capacitive behavior between -0.2 and +0.8 V (vs SCE). By 5 mA and 10 mA constant current charge/discharge, the nano-MnO₂ annealed at 100 ℃ can provide a specific capacitance of 158.5 F·g^-1 and 151.2 F·g^-1, respectively.     

氢气泡模板电沉积多孔金属镍薄膜

Porous nickel films have been successfully electrodeposited using cathodic hydrogen bubbles as a template. The influence of deposition parameters including concentration, temperature and current density on the films morphologies has been systematically studied. SEM results showed that increase in current density resulted in the deposits with higher pore density and smaller pore size. Both the pore size and thickness of the pore walls increased with the electrolyte temperature range from 20 to 60 ℃ when the other deposition parameters were fixed. Increasing the concentration of NiCl₂ or NH₄Cl in the electrolyte led to the thicker of the pore walls and declined pore size and density. The deposits displayed a dendritic morphology in cross-sectional SEM image. Electrochemical characterization of the porous nickel films after surface oxidation in 1.0 mol·L^-1 NaOH solution showed that specific capacitance as high as 7.2 F·g^-1 could be reached.     

一种估算多壁碳纳米管电化学容量的方法

Five kinds of multi-walled carbon nanotubes were prepared by CVD(Chemical Vapour Deposition) and purified under the same conditions, then were used as electrodes for super capacitors in order to compare their performance. The differences measured in terms of specific capacitance by galvanostatic cycling were presented, porosity measurements using nitrogen at 77 K made on carbon nanotubes allowd a better understanding of the electrochemical behavior of these carbon nanotubes. The experiment results show that pore diameter in the range of more than 3nm is required to maximize the capacitance in the electrolyte of 1.0 mol·L^-1 LiClO₄/EC+DEC(V_EC∶V_DEC=1∶1), and the BET surface area contributed by this extent is almost linear with the specific capacitance, in which an average value is about 0.11 F·m^-2, and the specific capacitance estimated from above is very close to the value by experiment.     

三苯基Corrole及其铜配合物的π-π堆积效应研究

Aggregation behavior of 5,10,15-tris(pentafluorophenyl)corrole (F₁₅TPC), 5,10,15,20-tetra(pentafluoroph-enyl)porphyrin (F₂₀TPP), and their copper complexes in DCM solution were investigated by using UV-Vis spectro-scopic method. F₂₀TPP and F₂₀TPPCu exhibited strong π-π stacking interactions in DCM, and the intermolecular dimerization constants turned out to be 1.82 × 10³ and 17.2 × 10³ L·mol^-1 respectively. However, extinction coefficients of F15TPC and F15TPCCu at soret band remained unchanged with increasing in their concentrations from 1.0 to 40.0 μmol·L^-1, indicating they remained monomeric in DCM solution. Based on DFT calculation and the π-π stacking geometries observed in crystal structures of metal octaethylcorrole complexes, destroy of π-π interactions in F₁₅TPC and F₁₅TPCCu may be understood by the electrostatic potential surfaces (EPS) features of the molecules and steric repulsions caused by the introducing of three phenyl at the meso- positions of corrole macrocycle.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.