单分散磁性P(St/BA/MAA)微球的制备

在共沉淀法合成超细磁流体的基础上 ,以苯乙烯 (St)、丙烯酸丁酯 (BA)和甲基丙烯酸 (MAA)为共聚单体 ,在不同的介质体系中采用无皂乳液聚合法制备了单分散 ,粒径范围为 80～ 2 30nm的磁性P(St BA MAA)微球 .详细探讨了介质极性、磁流体中表面活性剂含量对磁性高分子微球粒径和单分散性的影响 .实验结果表明 ,在一定范围内随介质极性降低 ,磁性高分子微球的单分散性提高 ,随表面活性剂用量增加 ,单分散性变差 .总体来看 ,磁性高分子微球的单分散性与其表面静电斥力密切相关 ,过大或过小的静电斥力均会导致磁性高分子微球单分散性的降低 .     

Polar Gradient Latex Particles with Hydrophilic Core and Hydrophobic Shell Prepared via Multistep Emulsion Polymerization

Monodisperse polar gradient particles were synthesized via a three‐step emulsion polymerization using poly(butyl acrylate‐methyl methacrylate‐methacrylic acid‐ethylene glycol dimethacrylate) (P(BA‐MMA‐MAA‐EGDMA)) as core, poly(methyl methacrylate‐methacrylic acid‐styrene) (P(St‐MMA‐MAA)) as interlayer and polystyrene (PSt) as shell. The particle growth and encapsulation in each emulsion polymerization step were followed by transmission electron microscopy (TEM), dynamic light scattering (DLS) and conductometric titration. Results indicated that the feeding mode and the interlayer were essential to prepare the polar gradient latex particles with hydrophilic core and hydrophobic shell. The morphologies of the two‐layer core/interlayer and three‐layer core/interlayer/shell particles were observed in TEM micrographs, and the sequential encapsulations of the carboxyl‐containing core and the core/interlayer particles were confirmed by an increase in the particle size as well as an increase in the buried carboxyl percentage.     

在无机SiO2纳米粒子存在下的苯丙乳液共聚合

研究了在无机SiO₂纳米粒子存在下的苯丙乳液共聚合.选择了能使苯丙乳液稳定存在的乳化剂体系,研究了温度和SiO₂的加入对聚合过程转化率的影响,结果表明,SiO₂的加入对聚合过程有阻聚作用,使单体的转化率降低.SEM照片证明SiO₂粒子已经进入苯丙乳液粒子中,而且SiO₂的加入对乳液制成的膜断面形态有一定影响.实验发现在无机SiO₂纳米粒子存在下,苯丙乳液共聚合时有较多残渣出现,对此通过改进乳液聚合进行了有效地改善.同时对制成的复合材料进行了力学性能和热学性能的测定.     

苯乙烯—甲基丙烯酸超浓乳液的制备及聚合

超浓乳液聚合有着良好的应用前景［１，２］．但文献报道的超浓乳液研究多集中于苯乙烯体系，而对于在此基础上引入功能基单体制备超浓乳液，研究得较少［３］．本文研究了影响苯乙烯（Ｓｔ）与甲基丙烯酸（ＭＡＡ）制备（Ｓｔ－ＭＡＡ）超浓乳液稳定性的因素．探讨了其聚...     

DESIGN AND CONTROL OF SOAP-FREE HYDROPHILIC-HYDROPHOBIC CORE-SHELL LATEX PARTICLES WITH HIGH CARBOXYL CONTENT IN THE CORE OF THE PARTICLES

Soap-free hydrophilic-hydrophobic core-shell latex particles with high carboxyl content in the core of the particles were synthesized via the seeded emulsion polymerization using methyl methacrylate(MMA),butyl acrylate(BA), methacrylic acid(MAA),styrene(St)and ethylene glycol dimethacrylate(EGDMA)as monomers,and the influences of MMA content used in the core preparation on polymerization,particle size and morphology were investigated by transmission electron microscopy,dynamic light scattering and conductometric titration.The results showed that the seeded emulsion polymerization could be carried out smoothly using "starved monomer feeding process" when MAA content in the core preparation was equal to or less than 24 wt%,and the encapsulating efficiency of the hydrophilic P(MMA-BA-MAAEGDMA) core with the hydrophobic PSt shell decreased with the increase in MAA content.When an interlayer of P(MMAMAA -St)with moderate polarity was inserted between the P(MMA-BA-MAA-EGDMA)core and the PSt shell,well designed soap-free hydrophilic-hydrophobic core-shell latex particles with 24 wt%MAA content in the core preparation were obtained.     

原位实时近红外光谱研究核壳乳液聚合过程

将苯乙烯(St)和丙烯酸丁酯(BA)单体以不同的聚合方式制备核壳乳液和共聚乳液, 并采用近红外光谱技术实现了对乳液反应过程的原位实时监测, 通过对近红外光谱的谱带归属和主成分分析, 为近红外光谱技术判别乳液聚合过程提供了科学依据, 也为判断反向核壳乳液核壳翻转的拐点提出了一种新的方法. 采用簇类独立软模式法(SIMCA)建立了定性判别模型, 得到了很好的判别结果, 为进一步研究近红外光谱技术用于核壳乳液聚合过程奠定了基础.     

超声无皂乳液聚合制备BA/St/AM三元共聚物乳胶粒及其聚合机理研究

将超声技术引入到无皂乳液聚合方法中,在不加入任何引发剂和乳化剂的情况下,制备了丙烯酸丁酯(BA)/苯乙烯(St)/丙烯酰胺(AM)三元共聚纳米乳胶粒.研究了不同超声时间对单体转化率、乳胶粒粒径以及乳液粘度的影响.同时还探讨了超声无皂乳液聚合机理,认为AM在聚合过程中起到了引发和稳定的作用.TEM照片表明,乳胶粒直径大约在80nm左右,FTIR及DSC分析表明产物为三元共聚物,而不是共混物.     

Preparation of sulphonate-containing core/shell latex particles via seeded emulsion copolymerization

<正>In this study,P(St-MAA) seed latex particles were first prepared via soap-free emulsion polymerization of styrene(St) and methacrylic acid(MAA),then the seed particles were allowed to swell with St at room temperature,and the P(St-MAA)/P(StNaSS) core/shell latex particles were then synthesized via seeded emulsion copolymerization of St and sodium styrene sulphonate (NaSS) using AIBN as initiator in the presence of N,N'-methylenebisacrylamide(BAA,water-soluble crosslinker).Results showed that the polymerization could be carried out smoothly when the ratio of BAA to total monomers was less than 3 mol%,the narrow dispersed P(St-MAA) seed particles with the diameter of 150 nm and the P(St-MAA)/P(St-NaSS) core/shell latexes with the particle size of about 200 nm were synthesized.When the 25/75 mole ratio of NaSS/(St + MAA) and 2 mol%of BAA were used in the seeded emulsion polymerization,the resulted P(St-MAA)/P(St-NaSS) latex product showed a low weight loss after water extraction,and the NaSS unit content in the whole particle and in the shell reached 11.7 mol%and 34.6 mol%,respectively.     

Preparation and Characterization of Polymer Core Shell Latex Particles

Stable core‐shell latex was synthesized by semicontinuous seeded emulsion polymerization with core monomers consisting of styrene (St), butyl acrylate (BA), and shell monomers consisting of methyl methacrylate (MMA), eutyl acrylate (EA), and methacrylic acid (MAA). The effects of compound emulsifier amount, mass ratio of anionic/nonionic emulsifier, and initiator amount on latex performance were investigated. By particle size analysis and transmission electron microscopy (TEM) observation, results suggest that final latex particles have clearly core shell structures.     

P(St-EAE-MAA)共聚物多孔微球的合成

利用无皂种子乳液聚合法合成了以聚苯乙烯(St)为骨架、丙烯酸乙酯(EA)和甲基丙烯酸(MAA)为共聚单体的P(St-EA-MAA)共聚物乳液;乳液经碱酸分步处理法制得共聚物多孔微球.考查了MAA用量和碱酸处理温度对微球形态的影响.     

包覆Fe2O3超微粒的苯乙烯/丙烯酸/丙烯酸丁酯核-壳型复合共聚物的性能研究

对采用种子乳液聚合法合成的包覆Fe₂O₃超微粒的苯乙烯/丙烯酸/丙烯酸丁酯(St/AA/BA)核-壳型复合共聚物材料进行玻璃化温度测试,结果表明,加入Fe₂O₃超微粒,使复合共聚物的玻璃化温度显著降低.对复合共聚物的流变行为研究表明,复合共聚物的非牛顿指数均小于1,且随着Fe₂O₃含量增加,非牛顿性增强,表观粘度下降,粘流活化能降低.     

共聚物酸掺杂接枝聚苯胺的研究

采用核壳乳液聚合方法合成了以甲基丙酸甲酯、甲基丙烯酸和丙烯酸丁酯三元共聚物酸为核,聚苯胺为壳的导电高分子复合物。复合物的电导率随着聚苯胺含量的增加而升高。用粒径分析仪、ＴＥＭ、ＦＴ－ＩＲ和ＤＳＣ对复合材料进行了表征。结果表明形成了核壳结构,由于共聚物酸起到了掺杂剂的作用,使制得的复合物能在环己酮、四氢呋喃等普通有机溶剂中有好的溶解性。     

预聚物复合助稳定剂条件下含氟丙烯酸酯共聚物的细乳液聚合

以甲基丙烯酸三氟乙酯(TFMA)、苯乙烯(St)和丙烯酸丁酯(BA)为共聚单体,在十二烷基硫酸钠(SDS)/磺酸盐型阴离子氟表面活性剂(S100)/辛基苯基聚氧乙烯醚(OP-10)组成的乳化体系中,采用预聚物和十六醇(HDL)共同组成的复合助稳定剂,对细乳液聚合制备St/BA/TFMA三元共聚物的过程进行了研究.通过F...     

Multiphase Polymer Dispersions and Nanocomposites by Catalytic/Free Radical Emulsion Polymerization

Summary: Free radical emulsion polymerization of styrene (S) or butyl acrylate (BA) in the presence of latices of linear polyethylene (PE) prepared by catalytic emulsion polymerization affords colloidally stable multiphase latices. Coagulation of a PE/PS latex affords nanocomposites composed of small PE phases dispersed in a PS matrix, as evidenced by the large supercoolings of PE crystallization (by DSC). TEM of PE/PBA latices indicates a PBA phase around the PE particles under the emulsion polymerization conditions investigated. Films formed from these dispersions exhibit homogeneously dispersed PE particles.

Multiphase latices are obtained by free radical emulsion polymerization of butyl acrylate in the presence of latices of linear polyethylene (PE) prepared by catalytic emulsion polymerization.     

有机硅氧烷改性St/BA/AA三元共聚乳液的制备

采用核壳乳液聚合法,制备了乙烯基三乙氧基硅烷（VTES）改性的St/BA/AA三元共聚乳液,其结构经FT IR确证。研究了VTES用量、乳化剂用量及配比和引发剂用量对单体转化率和粒径的影响。结果表明：在最优条件［48%St, 48%BA, 4%AA, 1%N-MA, 4%VTES, 8%乳化剂（OP-10/SDS=1/3）, 0.8%引发剂］下,单体转化率为95.8%,平均粒径242 nm。并研究了改性St/BA/AA乳胶膜(1)的耐溶剂性和铅笔硬度。结果表明：1具有良好的耐溶剂性,铅笔硬度为2H。     

Self‐Assembled Colloidal Particle Clusters from In Situ Pickering‐Like Emulsion Polymerization via Single Electron Transfer Mechanism

A simple route is reported to synthesize colloidal particle clusters (CPCs) from self‐assembly of in situ poly(vinylidene fluoride)/poly(styrene‐co‐tert‐butyl acrylate) [PVDF/P(St‐co‐tBA)] Janus particles through one‐pot seeded emulsion single electron transfer radical polymerization. In the in situ Pickering‐like emulsion polymerization, the tBA/St/PVDF feed ratio and polymerization temperature are important for the formation of well‐defined CPCs. When the tBA/St/PVDF feed ratio is 0.75 g/2.5 g/0.5 g and the reaction temperature is 35 °C, relatively uniform raspberry‐like CPCs are obtained. The hydrophobicity of the P(St‐co‐tBA) domains and the affinity of PVDF to the aqueous environment are considered to be the driving force for the self‐assembly of the in situ formed PVDF/P(St‐co‐tBA) Janus particles. The resultant raspberry‐like CPCs with PVDF particles protruding outward may be promising for superhydrophobic smart coatings.

     

乳液聚合法制备P(St/BA)-KAl(OH)2CO3纳米复合物

利用乳液聚合法制备了一种含KAl(OH)2CO3纳米粒子的聚苯乙烯／丙烯酸丁酯复合物．Zeta电位、粒径分布、扫描电镜(SEM)和透射电镜(TEM)等分析表明KAl(OH)2CO3粒子能够稳定地分散于苯丙乳液的乳胶粒中,形成核一壳结构．热失重(TG)分析表明KAl(OH)2CO3粒子的加入能提高复合物的热稳定性,使其在阻燃涂料领域有着潜在的应用前景．     

Polystyrene(1)/poly(butyl acrylate-methacrylic acid)(2) core-shell emulsion polymers. Part I. Synthesis and colloidal characterization

Polystyrene (PS) (1)/Poly(n-butyl acrylate (BA)-methacrylic acid (MAA)) (2) structured particle latexes were prepared by emulsion polymerization using monodisperse polystyrene latex seed (118 nm) and different BA/MAA ratios. Three main aspects have been investigated: i) the polymerization kinetics; ii) the particle morphology as a function of reaction time; iii) the distribution of MAA units between the water phase and the polymer particles.The amount of MAA in the shell copolymer was found to be the main factor controlling the particle shape and morphology. The shape of the structured particles was, generally, non-spherical, and the shape irregularities increased as a particles was, generally, non-spherical, and the shape irregularities increased as a function of reaction time. At the beginning of the second stage reaction, new small particles were observed, which coalesced onto the PS seed as the polymerization proceeded. The distribution of the MAA groups in the latex particles and the serum was analyzed by alkali/back-acid titration, using ionic exchanged latexes. No MAA groups were detected in the latex serum. Due to the lowTg of the BA-MAA copolymers, alkali conductimetric titrations accounted for all the MAA groups on and within the polymer particles. Therefore, for these systems, this method is not only limited to a thin surface layer, as it is often assumed.     

Unseeded semibatch emulsion polymerization of butyl acrylate: Bimodal particle size distribution

Unseeded semibatch emulsion polymerization of butyl acrylate (BA) using sodium lauryl sulfate as emulsifier and potassium persulfate as initiator was carried out at the conditions where secondary nucleation was probable. This was achieved by using no emulsifier in the initial reactor charge. The effects of changes in monomer emulsion feed rate, initiator concentration and distribution, emulsifier concentration in the feed, and temperature on the evolution of particle size averages and distribution were investigated. Bimodal particle size distributions (PSD) were obtained for most of the latexes. Inhibition effects were found to be important in the development of PSD. Primary particle formation occurred through micellar nucleation, whereas secondary nucleation probably occurred through homogenous nucleation. The polydispersity index (PDI) of the latexes increased with the decreasing monomer emulsion feed rate. The application of a larger amount of initiator to the reactor charge or using a higher temperature, reduced the formation of secondary particles and resulted in a formation of an unimodal PSD. The overall steady‐state rate of polymerization was found to approach the rate of monomer addition (R_p ≈ R_a ), if the emulsifier concentration in the aqueous phase was appreciable. This is different from the correlation 1/R_p = 1/K + 1/R_a obtained for the BA semibatch process with neat monomer feed. This suggests that different rate expressions can be used for BA semibatch emulsion polymerization at different conditions. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 528–545, 2000     

Preparation and Swelling Properties of Poly(NIPAM) "Minigel" Particles Prepared by Inverse Suspension Polymerization

The characterization of temperature- and pH-sensitive poly-N-isopropylacrylamide (poly-NIPAM) microgel particles, produced by surfactant-free emulsion polymerization, has been extensively reported. In the work described here poly(NIPAM) gel particles, cross-linked with N-N'-methylenebisacrylamide (BA), have been produced using inverse suspension polymerization. These particles have been termed "minigels" here since they are somewhat larger than conventional microgels. Results suggest that minigel particles are formed as a dilute suspension, within the aqueous dispersed (droplet) phase. The hydrodynamic diameter of the minigel particles produced in this work is 相似文献