无皂乳液聚合制备含铕荧光共聚物乳液的研究及其表征

以丙烯酸(AA)为第一配体、邻菲罗啉(Phen)为第二配体、Eu3+为中心离子,合成了一种可聚合的稀土铕配合物.以配合物单体、甲基丙烯酸甲酯、丙烯酰胺和对苯乙烯磺酸钠为共聚单体,通过无皂乳液聚合的方法,制备了含铕荧光共聚物乳液.采用红外光谱对共聚物的结构进行了表征,并探讨了配合物单体含量对共聚物乳液性能的影响.透射电子显微镜(TEM)和激光光散射粒度仪(PCS)测试结果表明,共聚物乳液形成了相对均一的球状结构,但随着配合物单体含量增加,共聚物微球粒径逐渐增大、分散性变差.采用荧光分光光度计测试了共聚物乳液的荧光性能,在594和619 nm处出现Eu3+的特征发射光谱,且荧光强度随着配合物单体含量增加而增强.     

苯乙烯和N-乙烯基吡咯烷酮共聚物/Ag复合微球的制备及性能研究

首先用无皂乳液聚合法制备了单分散聚苯乙烯(PSt)乳液,以此为种子乳液,使用N,N-亚甲基双丙烯酰胺(MBA)为交联剂,过硫酸钾(KPS)为引发剂,进行苯乙烯和N-乙烯基吡咯烷酮(NVP)共聚合制备了以PSt为核、St和NVP共聚物为壳的具有核-壳结构的聚合物微球(P(St-NVP)).以此微球为模板通过化学沉积法得到了粒径分布均匀、单分散的P(St-NVP)/Ag复合微球.傅里叶红外光谱、X-射线衍射、扫描电镜、透射电镜、激光粒度仪和紫外-可见光谱对复合微球的结构、形貌、物相及催化性能进行了表征.结果表明,P(St-NVP)/Ag复合微球具有规则的球形结构,粒径在400～700 nm之间,随交联剂浓度或种子乳液浓度的增加,复合微球粒径减小.粒径在十几个纳米左右的银粒子均匀分布在微球表面和内部.载银复合微球在NaBH4还原4-硝基苯酚为4-氨基苯酚的模型反应中表现出较高的催化活性.     

硫化物-高分子复合微球表面形貌与模板组成关系的研究

以N-异丙基丙烯酰胺(NIPAM)和甲基丙烯酸(MAA)为单体, 通过反相悬浮聚合法制备了多种MAA含量不同的阴离子型P(NIPAM-co-MAA)共聚微凝胶. 以这些共聚微凝胶为模板, 在不同表面活性剂存在下, 合成了一系列CuS(CdS、ZnS)-P(NIPAM-co-MAA)无机-有机复合微球材料, 研究了表面活性剂种类, 模板组成等因素对上述硫化物-高分子复合微球表面形貌的影响. 结果表明, 实验条件下所得复合微球表面均具有图案化结构, 该结构明显依赖于表面活性剂的种类和模板微凝胶的组成. 就模型体系而言, 随表面活性剂Span-20、Span-80和Span-85的HLB(亲水亲油平衡)值降低, 微球表面形貌趋于粗糙, 但仍然十分规整; 就模板组成而言, 模板中MAA含量增加使得复合微球的表面形貌变得更加精细. 据此, 认为通过选用合适的表面活性剂和微凝胶模板可以在一定范围内调控这些无机-有机复合微球的表面形貌, 从而为后续应用研究奠定基础.     

不同表面官能团和化学组成共聚物微球的表面生物矿化研究

采用具有不同共聚物组成和端基官能团的聚己内酯-b-聚乙二醇共聚物(PCL-b-PEG),通过双乳液溶剂挥发法制备了一系列具有不同表面性质的生物降解高分子微球.采用生物模拟矿化的方法以磷灰石修饰微球表面.进一步通过扫描电镜、热重分析仪、X-射线衍射仪和光电子能谱仪对微球表面磷灰石的形貌、含量、结构和组成进行了分析.研究了微球表面亲水性、粗糙度、官能团以及矿化时间对于磷灰石形成的影响.最终实验结果表明,随着共聚物中PEG含量增加,微球表面粗糙度和亲水性增加,因此微球表面磷灰石含量增加.同时微球表面官能团以及矿化时间的不同也会对磷灰石的形成和分布产生明显影响.     

反相微乳液合成30～100nm磁性聚合物纳米微球

利用反相微乳液一步法成功地制备了磁性聚合物纳米微球,微球粒径在30～100nm左右,均一性较好,研究表明,Fe(Ⅱ)浓度对微乳液和微胶乳的稳定性有很大影响,碱的种类、AOT和单体的含量能控制微球粒径,用振动探针式磁强仪(VSM)测定了不同比例的[Fe(Ⅱ)]/[Fe(Ⅲ)]所合成的聚合物微球的磁性,发现温度对合成高磁饱和强度和超顺磁性起关键作用,合成的磁性聚合物微胶乳透明且稳定性较好.     

醇/水介质对PEG大分子单体与BMA分散共聚反应的影响

通过端基反应法合成了苯乙烯单封端的聚乙二醇(St- PEG)大分子单体,使其与甲基丙烯酸丁酯(BMA)在乙醇 水混合介质中进行分散共聚,得到了聚乙二醇接枝的聚甲基丙烯酸丁酯(PBMA- g -PEG)高分子微球.PBMA- g -PEG共聚物的亲溶剂 疏溶剂平衡将影响微球的形成,反应结束时,体系随BMA浓度和介质中水含量的变化呈现出4种不同的状态,透明清液、乳液、伴有沉淀或凝胶的乳液和凝胶.用透射电子显微镜(TEM)和激光光散射(LLS)对乳液体系的粒径及其形态进行了表征,表明所得接枝高分子微球形态规整具有较好的单分散性.通过控制介质中水的含量和BMA的浓度可得粒径在4 0～5 0 0nm范围的PBMA -g -PEG微球.     

基于金属卟啉的甲基磷酸二甲酯分子印迹聚合物微球的合成及性能

合成了分别以5-(4-甲基丙烯酰氧苯基)-10,15,20-三苯基锌卟啉(ZnMOTPP)和5-(4-甲基丙烯酰氧苯基)-10,15,20-三苯基钆卟啉(GdMOTPP)为功能单体, 甲基丙烯酸(MAA)为辅助功能单体的甲基磷酸二甲酯(DMMP)分子印迹聚合物微球. 扫描电子显微镜(SEM)表征结果表明, 微球平均粒径为50～100 μm, 粒度均匀. 与甲基丙烯酸作为功能单体的分子印迹聚合物微球的吸附性能和特异性进行对比发现, ZnMOTPP分子印迹微球的吸附性能优于 GdMOTPP分子印迹微球, 金属卟啉分子印迹微球的吸附性能优于仅以甲基丙烯酸作为功能单体的分子印迹微球, 并且微球对其印迹分子DMMP具有特异性吸附. Scatchard分析表明, DMMP分子印迹空穴中只存在一类结合位点, MIPMs-Zn+MAA的最大吸附量Q_max=148 μmol/g, MIPMs-Gd+MAA的Q_max=78.9 μmol/g, MIPMs-MAA的Q_max=13.57 μmol/g.     

单分散P(St-BA-AN)/PANI核壳结构复合微球的制备与电性能

以苯乙烯(St)、丙烯酸丁酯(BA)和丙烯腈(AN)为单体, 采用乳液聚合的方法制备出单分散苯乙烯-丙烯酸丁酯-丙烯腈三元共聚物[P(St-BA-AN)]种子微球, 再在该种子微球表面包覆聚苯胺(PANI), 制得P(St-BA-AN)/PANI核壳结构复合微球. 采用扫描电镜(SEM)、透射电镜(TEM)、傅里叶变换红外透射光谱(FTIR)和漫反射光谱等测试手段对所制备的种子微球和复合微球的形态、结构和形成机理进行了研究, 并用四探针法测定了核壳结构复合物的导电性. 研究结果表明, 通过改变种子乳液共聚物的组成和加入苯胺的量及氧化剂的量等条件可调控复合微球的电导率. 与P(St-BA)/PANI核壳结构复合微球相比, 在核组成中引入了氰基的P(St-BA-AN)/PANI核壳结构复合微球的电导率明显提高, 当加入苯胺的量为P(St-BA-AN)种子微球与苯胺单体总质量分数的40%时, 其电导率可达到0.71 S/cm. 红外光谱结果证实了P(St-BA-AN)种子微球中的氰基和壳层中聚苯胺的胺基之间存在某种相互作用, 导致核壳结构复合物电导率的提高.     

单分散磁性P(St/BA/MAA)微球的制备

在共沉淀法合成超细磁流体的基础上 ,以苯乙烯 (St)、丙烯酸丁酯 (BA)和甲基丙烯酸 (MAA)为共聚单体 ,在不同的介质体系中采用无皂乳液聚合法制备了单分散 ,粒径范围为 80～ 2 30nm的磁性P(St BA MAA)微球 .详细探讨了介质极性、磁流体中表面活性剂含量对磁性高分子微球粒径和单分散性的影响 .实验结果表明 ,在一定范围内随介质极性降低 ,磁性高分子微球的单分散性提高 ,随表面活性剂用量增加 ,单分散性变差 .总体来看 ,磁性高分子微球的单分散性与其表面静电斥力密切相关 ,过大或过小的静电斥力均会导致磁性高分子微球单分散性的降低 .     

丙烯酸酯纳米乳液的制备与表征

将甲基丙烯酸羟乙酯(HEMA)与甲基丙烯酸(MAA)或丙烯酸(AA)用作甲基丙烯酸甲酯(MMA)／丙烯酸丁酯(BA)乳液聚合体系的反应性助乳化剂，采用一种改进的微乳液聚合方法，合成了高单体／乳化剂比例(大于40：1)的聚丙烯酸酯纳米乳液．讨论了引发剂、乳化剂、助乳化别对乳胶粒大小和胶膜吸水率的影响，并对乳液的流体力学行为，共聚物的拉伸行为及耐水性等进行了研究．     

种子乳液聚合法制备多孔乳胶粒

用批量乳液聚合法制备了苯乙烯（Ｓｔ）———甲基丙烯酸甲酯（ＭＭＡ）二元共聚种子乳液Ｓ１以及Ｓｔ ＭＭＡ 丙烯酸（ＡＡ）三元共聚种子乳液Ｓ２,通过连续法无皂种子乳液聚合合成了一系列不同ＡＡ或ＭＡＡ（甲基丙烯酸）含量的Ｓｔ、ＭＭＡ三元共聚乳液．将所得复合胶乳进行碱／酸分步处理,得到具有多孔结构的乳胶粒．用透射电镜对胶粒形态进行了表征,考察了不饱和酸种类和用量、碱处理初始ｐＨ值及溶胀剂对胶粒成孔的影响．     

Polystyrene(1)/poly(butyl acrylate-methacrylic acid)(2) core-shell emulsion polymers. Part I. Synthesis and colloidal characterization

Polystyrene (PS) (1)/Poly(n-butyl acrylate (BA)-methacrylic acid (MAA)) (2) structured particle latexes were prepared by emulsion polymerization using monodisperse polystyrene latex seed (118 nm) and different BA/MAA ratios. Three main aspects have been investigated: i) the polymerization kinetics; ii) the particle morphology as a function of reaction time; iii) the distribution of MAA units between the water phase and the polymer particles.The amount of MAA in the shell copolymer was found to be the main factor controlling the particle shape and morphology. The shape of the structured particles was, generally, non-spherical, and the shape irregularities increased as a particles was, generally, non-spherical, and the shape irregularities increased as a function of reaction time. At the beginning of the second stage reaction, new small particles were observed, which coalesced onto the PS seed as the polymerization proceeded. The distribution of the MAA groups in the latex particles and the serum was analyzed by alkali/back-acid titration, using ionic exchanged latexes. No MAA groups were detected in the latex serum. Due to the lowTg of the BA-MAA copolymers, alkali conductimetric titrations accounted for all the MAA groups on and within the polymer particles. Therefore, for these systems, this method is not only limited to a thin surface layer, as it is often assumed.     

高羧基含量无皂多孔聚合物乳胶粒的研究

功能性聚合物乳液的性能与其功能基的含量密切相关. 采用完全无皂种子乳液聚合技术合成了具有不同羧基含量并且粒径分布均一的交联型聚甲基丙烯酸甲酯-丙烯酸乙酯因为甲基丙烯酸 [P(MMA-EA-MAA)]乳胶粒, 然后通过碱后处理, 制备出了高羧基含量的无皂多孔P(MMA-EA-MAA)乳胶粒. 系统研究了MAA对聚合反应、胶粒特性及胶粒多孔结构形态的影响. 结果表明: 在交联剂二乙烯基苯用量一定(0.3 g)的条件下, 随着MAA用量从4.0 mol%增加到 10.0 mol%, 聚合物交联程度(P_x)从28.26%迅速增大至90.95%, 当其用量超过10.0 mol%后P_x增大趋势变缓; 随着MAA用量的增加, 处理后胶粒体积膨胀百分率(ΔV)逐渐增大, 在MAA用量为12.0 mol%时ΔV达到42.1%的最大值, 当MAA用量增大到14.0 mol%时, 尽管P_x高达95.44%, 胶粒仍具有完好的孔状结构.     

Synthesis and characteristics of poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive composite hollow latex particles and their application as drug carriers

In this work, the poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive composite hollow latex particles was synthesized by a three‐step reaction. The first step was to synthesize the poly(methyl methacrylate‐co‐methacrylic acid) (poly(MMA‐MAA)) copolymer latex particles by the method of soapless emulsion polymerization. The second step was to polymerize methacrylic acid (MAA), N‐isopropylacrylamide (NIPAAm), and N,N′‐methylenebisacrylamide in the presence of poly(MMA‐MAA) latex particles to form the linear poly(methyl methacrylate‐co‐methacrylic acid)/crosslinking poly(methacrylic acid‐co‐N‐isopropylacrylamide) (poly(MMA‐MAA)/poly(MAA‐NIPAAm)) core–shell latex particles. In the third step, the core–shell latex particles were heated in the presence of ammonia solution to form the crosslinking poly(MAA‐NIPAAm) thermosensitive hollow latex particles. The morphologies of poly(MMA‐MAA)/poly(MAA‐NIPAAm) core–shell latex particles and poly(MAA‐NIPAAm) hollow latex particles were observed. The influences of crosslinking agent and shell composition on the lower critical solution temperature of poly(MMA‐MAA)/poly(MAA‐NIPAAm) core–shell latex particles and poly(MAA‐NIPAAm) hollow latex particles were, respectively, studied. Besides, the poly(MAA‐NIPAAm) thermosensitive hollow latex particles were used as carriers to load with the model drug, caffeine. The effect of various variables on the amount of caffeine loading and the efficiency of caffeine release was investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5203–5214     

Temperature-driven Precipitation of poly(N-isopropylacrylamide-co-methacrylic acid) in Cationic,Anionic and Nonionic Surfactant Solutions

The temperature-driven precipitation of poly(N-isopropylacrylamide-co-methacrylic acid) (P(NIPAM-co-MAA)) in anionic, cationic, and non-ionic surfactants solutions was investigated under an acidic (e.g. pH 3.0) and an alkali condition (pH 9.0). Under the acidic condition, sodium dodecyl sulfate (SDS, anionic) and cetyltrimethylammonium chloride (CTAC, cationic) increased the cloud point of the copolymer and they suppressed the temperature-sensitivity. Under the alkali condition, SDS suppressed the temperature sensitivity as under the acidic condition, but CTAC boosted the temperature sensitivity and it decreased the cloud point of the copolymer. The effect of CTAC on the phase transition under the alkali condition was opposite to the effect observed under the acidic condition. Tween 20 (non-ionic) had little effect on the cloud point and the temperature-sensitivity under both the acidic and the alkali conditions.     

Synthesis and characteristics of poly(methyl methacrylate‐co‐methacrylic acid)/poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive semi‐hollow latex particles and their application to drug carriers

In this work, the poly(methyl methacrylate‐co‐methacrylic acid)/poly(methacrylic acid‐co‐N‐isopropylacrylamide) thermosensitive composite semi‐hollow latex particles was synthesized by three processes. The first process was to synthesize the poly(methyl methacrylate‐co‐methacrylic acid) (poly (MMA‐MAA)) copolymer latex particles by the method of soapless emulsion polymerization. The second process was to polymerize methacrylic acid (MAA), N‐isopropylacrylamide (NIPAAm), and crosslinking agent, N,N′‐methylenebisacrylamide, in the presence of poly(MMA‐MAA) latex particles to form the linear poly(methyl methacrylate‐co‐methacrylic acid)/crosslinking poly(methacrylic acid‐co‐N‐isopropylacrylamide) (poly(MMA‐MAA)/poly(MAA‐NIPAAm)) core–shell latex particles with solid structure. In the third process, part of the linear poly(MMA‐MAA) core of core–shell latex particles was dissolved by ammonia to form the poly(MMA‐MAA)/poly(MAA‐NIPAAm) thermosensitive semi‐hollow latex particles. The morphologies of the semi‐hollow latex particles show that there is a hollow zone between the linear poly(MMA‐MAA) core and the crosslinked poly(MAA‐NIPAAm) shell. The crosslinking agent and shell composition significantly influenced the lower critical solution temperature of poly(MMA‐MAA)/poly(MAA‐NIPAAm) semi‐hollow latex particles. Besides, the poly(MMA‐MAA)/poly(MAA‐NIPAAm) thermosensitive semi‐hollow latex particles were used as carriers to load with the model drug, caffeine. The processes of caffeine loaded into the semi‐hollow latex particles appeared four situations, which was different from that of solid latex particles. In addition, the phenomenon of caffeine released from the semi‐hollow latex particles was obviously different from that of solid latex particles. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3441–3451     

Preparation and clinical application of immunomagnetic latex

Magnetic poly(methyl methacrylate) (PMMA)/poly(methyl methacrylate‐co‐methacrylic acid) [P(MMA–MAA)] composite polymer latices were synthesized by two‐stage soapless emulsion polymerization in the presence of magnetite (Fe₃O₄) ferrofluids. Different types and concentrations of fatty acids were reacted with the Fe₃O₄ particles, which were prepared by the coprecipitation of Fe(II) and Fe(III) salts to obtain stable Fe₃O₄ ferrofluids. The Fe₃O₄/polymer particles were monodisperse, and the composite polymer particle size was approximately 100 nm. The morphology of the magnetic composite polymer latex particles was a core–shell structure. The core was PMMA encapsulating Fe₃O₄ particles, and the shell was the P(MMA–MAA) copolymer. The carboxylic acid functional groups (COOH) of methacrylic acid (MAA) were mostly distributed on the surface of the composite polymer latex particles. Antibodies (anti‐human immunoglobulin G) were then chemically bound with COOH groups onto the surface of the magnetic core–shell composite latices through the medium of carbodiimide to form the antibody‐coated magnetic latices (magnetic immunolatices). The MAA shell composition of the composite latex could be adjusted to control the number of COOH groups and thus the number of antibody molecules on the magnetic composite latex particles. With a magnetic sorting device, the magnetic immunolatices derived from the magnetic PMMA/P(MMA–MAA) core–shell composite polymer latex performed well in cell‐separation experiments based on the antigen–antibody reaction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1342–1356, 2005     

交联剂对无皂P(MMA-EA-MAA)种子聚合乳胶粒成孔的影响

采用完全无皂种子乳液聚合技术合成了粒径窄分布的P(MMA-EA-MAA)乳胶粒,通过对上述胶乳进行碱处理,制备出了具有空腔结构和多孔结构的聚合物乳胶粒,研究了交联剂的种类和用量对聚合过程、胶粒特性及胶粒结构形态的影响.结果表明,体系中加入交联剂后,单体转化率都有不同程度的提高;随交联剂用量的增加,乳胶粒粒径略有减小,交联剂用量较高时,乳胶粒粒径分布加宽;二乙烯基苯(DVB)的交联效率稍高于双甲基丙烯酸乙二醇酯(EGDMA);不加入交联剂及EGDMA用量低于0.5%时,处理后乳胶粒呈空腔结构,加入DVB及EGDMA用量高于1.0%时,处理后乳胶粒呈多孔结构,并且乳胶粒体积增量随交联剂用量的增加而减小.     

Synthesis and characteristics of poly(N‐isopropylacrylamide‐co‐methacrylic acid)/Fe3O4/poly(N‐isopropylacrylamide‐co‐methacrylic acid) two‐shell thermosensitive magnetic composite hollow latex particles

In this study, the poly(N‐isopropylacrylamide‐methylacrylate acid)/Fe₃O₄/poly(N‐isopropylacrylamide‐methylacrylate acid) (poly(NIPAAm‐MAA)/Fe₃O₄/poly(NIPAAm‐MAA)) two‐shell magnetic composite hollow latex particles were synthesized by four steps. The poly(methyl methacrylate‐co‐methylacrylate acid) (poly(MMA‐MAA)) copolymer latex particles were synthesized first. Then, the second step was to polymerize NIPAAm, MAA, and crosslinking agent in the presence of poly(MMA‐MAA) latex particles to form the linear poly(MMA‐MAA)/crosslinking poly(NIPAAm‐MAA) core–shell latex particles. Then, the core–shell latex particles were heated in the presence of NH₄OH to dissolve the linear poly(MMA‐MAA) core to form the poly(NIPAAm‐MAA) hollow latex particles. In the third step, the Fe₃O₄ nanoparticles were generated in the presence of poly(NIPAAm‐MAA) hollow polymer latex particles and formed the poly(NIPAAm‐MAA)/Fe₃O₄ magnetic composite hollow latex particles. The fourth step was to synthesize poly(NIPAAm‐MAA) in the presence of poly(NIPAAm‐MAA)/Fe₃O₄ latex particles to form the poly(NIPAAm‐MAA)/Fe₃O₄/poly(NIPAAm‐MAA) two‐shell magnetic composite hollow latex particles. The effect of various variables such as reactant concentration, monomer ratio, and pH value on the morphology and volume‐phase transition temperature of two‐shell magnetic composite hollow latex particles was studied. Moreover, the latex particles were used as carriers to load with caffeine, and the caffeine‐loading characteristics and caffeine release rate of latex particles were also studied. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2880–2891     

Morphological evolution of multistage polymer particles in the alkali post-treatment

Multistage carboxyl-containing polymer latex particles were synthesized by multistep emulsion copolymerization using methyl methacrylate (MMA), butyl acrylate (BA), methacrylic acid (MAA), ethylene glycol dimethacrylate (EGDMA) and styrene (St) as raw materials, and the latex particles with diverse morphologies including multihollow, hollow and “bowl-like” were obtained by post-treating the multistage latex particles under alkali condition. The morphological evolution of the particles in the alkali post-treatment process was characterized with electron microscopy, and effects of alkali treatment conditions including treatment temperature, time as well as initial pH on particle morphology were investigated. Results indicated that the alkali treatment temperature and initial pH were the key parameters to control the morphology of the treated particles. When the alkali treatment temperature was below 60 °C or the initial pH was lower than 8.5, the particle morphology was almost unchanged no matter how long the treatment time was prolonged. The multihollow and hollow particles could be formed as alkali treatment temperature exceeded 60 °C in the range of initial pH from 8.8 to 9.5. While the latex particles with “bowl-like” morphology were observed when the multistage latex was alkali treated at 90 °C for 3 h with initial pH 9.8. Furthermore, extending alkali treatment time was beneficial to get the swelling equilibrium of the latex particles.