Promotional Effect of Bismuth as Dopant in Bi-Doped Vanadyl Pyrophosphate Catalysts for Selective Oxidation of n-Butane to Maleic Anhydride

Bismuth-promoted (1% and 3%) vanadyl pyrophosphate catalysts were prepared by refluxing Bi(NO3)3·5H2O and VOPO4·2H2O in isobutanol. The incorporation of Bi into the catalysts lattice increased the surface area and lowered the overall V oxidation state. Profiles of temperature programmed reduction (TPR) in H2 show a significant shift of the maxima of major reduction peaks to lower temperatures for the Bi-promoted catalysts. A new peak was also observed at the low temperature region for the catalyst with 3% of Bi dopant. The addition of Bi also increased the total amount of oxygen removed from the catalysts. The reduction pattern and reactivity information provide fundamental insight into the catalytic properties of the catalysts. Bi-promoted catalysts were found to be highly active (71% and 81% conversion for 1% and 3% Bi promoted catalysts, respectively, at 703 K), as compared to the unpromoted material (47% conversion). The higher activity of the Bi-promoted catalysts is due to that these catalysts possess highly active and labile lattice oxygen. The better catalytic performance can also be attributed to the larger surface area.     

Partial Oxidation of Methane to Syngas Using LatticeOxygen of La_(1-x)Sr_xFeO_3 Perovskite OxideCatalysts Instead of Molecular Oxygen

Catalytic partial oxidation of methane to syngas using the lattice oxygen of La1-xSrxFeO3 perovskite oxide catalysts in place of molecular oxygen was studied. La1-xSrxFeO3 (x=0, 0.1, 0.2, 0.5) perovskite oxides were prepared by the "auto-combustion method". XRD analysis showed that all La1-xSrxFeO3 samples have a single-phase perovskite-type oxide. The redox properties of the catalysts were investigated by temperature programmed reduction with hydrogen (H2-TPR). Reducibility of the catalysts increase with the increasing of the Sr2+ content. The oxygen species of the catalysts and their reaction with CH4 were studied by the temperature programmed surface reaction (CH4-TPSR). In the absence of gas phase oxygen, there exist two kinds of oxygen species on the catalysts. One kind of the oxygen species with strong oxidative ability is produced first, which can oxidize CH4 completely to CO2 and H2O. Then, the second oxygen species with weak oxidative ability is formed, which can oxidize CH4 partially to CO and     

Effects of Mo promoters on the Cu-Fe bimetal catalysts for the DMC formation from CO2 and methanol

The Mo-promoted Cu-Fe bimetal catalysts were prepared and used for the formation of dimethyl carbonate（DMC） from CO₂ and methanol.The catalysts were characterized by X-ray diffraction（XRD）, temperature programmed reduction（TPR）,laser Raman spectra（LRS）,energy dispersive spectroscopy （EDS） and temperature programmed desorption（TPD） techniques.The experimental results demonstrated that the Mo promoters can decrease the reducibility and increase the dispersion of Cu-Fe clusters.The concentration balance of base-acid sites can be readily adjusted by changing the Mo content.The moderate concentration balance of acid and base sites was in favor of the DMC formation. Under optimal experimental conditions,the highest methanol conversion of 6.99%with a DMC selectivity of 87.7%can be obtained when 2.5 wt%of Mo was loaded.     

PROMOTING EFFECT OF VANADIUM IN CO HYDROGENATION OVER Rh-V/SiO_2 CATALYSTS FOR SYNTHESIZING C_2-OXYGENATES FROM SYNGAS

Rh-V/SiO_2 catalyst for the synthesis of C_2-oxygenates from syngashas been studied by means of reaction evaluation,TEM,TPR,TPD and FT-IRspectroscopy.It has been found when vanadium promoter was incorporated intothe Rh/SiO_2 catalyst,the rate of C_2-oxygenate formation was increased bymore than an order of magnitude,and the selectivity was improved from ca.30% to more than 70%,based on carbon efficiency.The vanadium ion inRh-V/SiO_2 catalysts can be readily reduced to lower valence states,and the ca-pacity of hydrogen adsorption remarkably enhanced for the catalyst.Further-more,for the Rh-V/SiO_2 catalyst cooled in H_2 to room temperature after reduc-tion,the vibration frequencies of CO adsorbed on it exhibit large red-shifts of40-70cm~(-1) for bridged CO and of ca.10cm~(-1) for linear CO,as comparedwith those of the unpromoted Rh/SiO_2 catalyst and of the promoted Rh-V/SiO_2 catalyst outgassed at 573 K after reduction by hydrogen.A model of COactivation by metal rhodjum,lower valence vanadium and activa     

CO2 reforming of methane over nickel catalysts supported on nanocrystalline MgAl2O4 with high surface area

In this paper dry reforming of methane (DRM) was carried out over nanocrystalline MgAl2O4-supported Ni catalysts with various Ni loadings. Nanocrystalline MgAl2O4 spinel with high specific surface area was synthesized by a co-precipitation method with the addition of pluronic P123 triblock copolymer as surfactant, and employed as catalyst support. The prepared samples were characterized by X-ray diffraction (XRD), N2 adsorption, H2 chemisorption, temperature-programmed reduction (TPR), temperature-programmed oxidation (TPO), temperature- programmed desorption (TPD) and transmission and scanning electron microscopies (TEM, SEM) techniques. The obtained results showed that the catalyst support has a nanocrystalline structure (crystal size: about 5 nm) with a high specific surface area (175 m2 g-1) and a mesoporous structure. Increasing in nickel content decreased the specific surface area and nickel dispersion. The prepared catalysts showed high catalytic activity and stability during the reaction. SEM analysis revealed that whisker type carbon deposited over the spent catalysts and increasing in nickel loading increased the amount of deposited carbon. The nickel catalyst with 7 wt% of nickel showed the highest catalytic activity.     

Effect of Cesium Modification on CuO/CeO2 Catalysts for the Catalytic Decomposition of N2O

A series of Cs-modified CuO/CeO2 mixed oxide catalysts was prepared for enhancing the stable activity of N2O decomposition.It was found that Cs modification promoted the catalytic performance of CuO/CeO2 catalysts significantly,The l%Cs-CuO/CeO2 catalyst exhibited the best activity,and the conversion of N2O reached 100%at 380℃ in the presence of 2% O2.The catalytic behaviors were investigated by means of XRD,N2 adsorption isotherms,XPS,H2-TPR(TPR:temperature-prograrmmed reduction),CO-IR,O2-TPD(TPD:temperature-programmed desorption)and diffused reflectance infrared Fourier transform spectorscopy(DRiFTs).The results revealed that Cs modification promoted the activity and the oxygen resistance by enhancing the desorption of surface oxygen species and increasing the content of Ce^3+.CO-DRIFTs revealed that Ce^3+could efficiently facilitate the regeneration of active Cu^+sites by an oxygen migration step.The possible reaction mechanism was also discussed.     

Catalytic oxidation of soot particulates over MnOx-CeO2 oxides prepared by complexation-combustion method

MnOx-CeO2 oxides prepared by complexation-combustion method were used for soot oxidation. The highest conversion rate of soot was obtained on a MnOx-CeO2 oxide prepared under mild acid condition of pH = 4, where the oxidation temperature corresponding to maximum activity was decreased more than 150℃ compared with that of un-catalytic soot oxidation. The structure and property of the catalysts were investigated by X-ray powder diffraction (XRD) and temperature programmed reduction (TPR). The results indicate...     

Hydrogen production via catalytic decomposition of NH3 using promoted MgO-supported ruthenium catalysts

Catalytic decomposition of NH_3 to high purity hydrogen offers a promising strategy for fuel cells, but presents challenges for high hydrogen yields at comparatively low temperatures due to the lack of efficient catalysts. Here, we report the facile preparation of ultra-fine ruthenium(Ru) species dispersed on Mg O, which show excellent activity and high temperature stability for NH_3 decomposition reaction. The hydrogen yield of the prepared Ru/Mg O catalysts reaches ca. 2,092 mmol H_2 g~(–1) Ru min~(–1) at450 °C, far exceeding that of the previously reported most reactive Ru-based catalysts and the same chemical composition samples prepared by other approaches. Various characterization techniques containing X-ray absorption fine structure(XAFS),in-situ diffuse reflectance infrared Fourier transform spectroscopy(in-situ DRTFTS) and temperature-programmed reduction/desorption(TPR/TPD) were carried out to explore the structure-function relation of the prepared Ru/Mg O catalysts. We found that the Ru species interact strongly with the Mg O support, which can efficiently protect the Ru species and Mg O support from agglomerating during NH_3 decomposition test, maintaining the stability of the catalysts.     

Catalytic Oxidation of Trichloroethylene over RuO2 Supported on Ceria-zirconia Mixed Oxide

Ru/Ce-Zr catalysts were prepared by impregnation of Ru on the hydrothermally synthesized Ce-Zr mixed oxide with different molar ratio of Ce/Zr.The resultant products were systematically characterized by inductively coupled plasma(ICP),X-ray diffraction(XRD),scanning electron microscopy(SEM)/energy dispersive spectrometry(EDS),H2-temperature programmed reduction(H2-TPR),NH3-temperature programmed desorption(NH3-TPD)and X-ray photoelectron spectroscopy(XPS).It was proved by H2-TPR and NH3-TPD that the introduction of Ru can improve the activity of oxygen of catalysts and the presence of Zr contributes to the increments of acid properties of catalysts.When the molar ratio of Ce-Zr was 8:4,the quantity of Ru was 0.9%(mass ratio),and the calcined temperature of catalysts was at 400℃,the removal rate of 90% for trichloroethylene(TCE)was reached at 250℃ for 5360 mg/m^3 TCE and the stability of the catalysts was investigated under the condition.The results showed that the high removal rate can be maintained for at least 90 h,which is promising for industrial application.     

Effect of synthesis solution pH of Co/γ-Al_2O_3 catalyst on its catalytic properties for methane conversion to syngas

The cobalt nanoparticles over γ-Al_2O_3 support were prepared via chemical reduction of CoCl_2·6H_2O using NaBH_4 with various values of pH in the range of 11. 92-13. 80. Synthesized catalysts were studied through X-ray diffraction( XRD),N_2 adsorption/desorption( BET),H_2-temperature programmed reduction( H_2-TPR),H_2-chemisorption,O_2 pulse titration and temperature programmed oxidation( TPO) methods. Obtained results exhibited the synthesis solution pH showed a significant influence on the activity and selectivity in partial oxidation of methane reaction. The methane conversion,CO selectivity and H_2 yield were enhanced by increasing of the synthesis solution pH. Compared to other catalysts,the catalyst that synthesized at pH of 13.80,showed a superior ability in syngas production with a H_2/CO ratio of near 2 and also a proper stability against deactivation during the partial oxidation of methane.     

含铜MFI分子筛的H2-TPT和O2-TPD研究

 采用H2－TPR和O2－TPD手段考察了不同金属离子交换的ZSM－5分子筛催化剂上的氢还原性能和氧脱附性能．发现Cu－ZSM－5催化剂的储氧能力及氧脱附性能优于Co－ZSM－5和Fe－ZSM－5催化剂;储氧能力强、低温下氧脱附性能好的催化剂,对NO分解反应的催化活性就高．铜离子是反应的活性中心．添加Ag和Ce可使Cu－ZSM－5催化剂上氧的脱附温度大大降低．Cu－ZSM－5／堇青石整体式催化剂上Cu的存在形式与单纯的Cu－ZSM－5有差异,整体式催化剂上的一价铜数量少,但较稳定．     

汽车尾气净化用Pt/ZrO2-CeO2催化剂的表征与性能

汽车尾气净化用三效催化剂是一个多元复合型催化剂.以氧化铈或氧化铝为载体的催化剂其物理化学性质及催化性能已有报道[1,2],但载体氧化铈中添加氧化锆对催化剂性能影响的报道并不多.本文利用H2-TPR,CO-TPD和贮氧量测定等技术表征了CeO2中加入ZrO2后载体及催化剂的还原、吸附选择性及贮氧能力,并与三效反应进行了关联.     

N2O Decomposition Catalyzed by K+-doped Bi0.02Co

K⁺-doped Bi_0.02Co was investigated as catalyst for N₂O decomposition. It was found that the catalytic performance of the Bi_0.02Co catalyst, which was prepared by coprecipitation method, can be effectively modified by potassium cations via impregnation. The optimized K_0.01Bi_0.02Co catalyst exhibited much higher activity compared with Bi_0.02Co and K_0.01Co for the reaction in feed gas 0.2% N₂O/Ar, irrespective of the presence or absence of impurity gas(volume fraction) 5%O₂, 2%H₂O, 0.12%NO and 10%CO₂. Characterization of the catalysts with H₂ temperature programmed reduction(H₂-TPR) and O₂ temperature programmed desorption(O₂-TPD) indicate that the Co-O bond in Bi_0.02Co was weakened by the K⁺doping, and hence the K_0.01Bi_0.02Co catalyst has much higher turnover frequency(TOF) than Co₃O₄ spinel and Bi_0.02Co for the reaction.     

助剂CeO2对Co/Al2O3催化剂上F-T合成反应性能的影响

 在用于F－T合成的Co／Al2O3催化剂中加入少量助剂,能够提高CO转化率和C5＋烃选择性．主要考察了助剂CeO2添加量和催化剂焙烧温度等因素对F－T合成反应的影响,并通过程序升温还原、程序升温氧化及X射线衍射等手段对催化剂进行了表征．结果表明,在Co／Al2O3催化剂中加入少量CeO2（n（Ce）／n（Co）＝0．1～0．14）,能够有效提高催化剂的催化活性和C5＋烃选择性;焙烧温度则以相反的趋势控制F－T反应活性和链增长几率;助剂的加入降低了催化剂的起始还原温度,改善了催化剂的还原性能．但是,催化剂的积碳量有所增加,经10h反应后,催化剂上存在两种类型的积碳．     

β－Mo2N0．78的合成及其对噻吩加氢脱硫反应的催化性能

 以N2－H2混合气为反应气，与三氧化钼进行多段程序升温反应制得了氮化钼．考察了反应气组成和氮化温度等条件对氮化钼结构组成的影响．结果表明，在n（N2）／n（H2）＝0．25～1，θ＝650～750℃的条件下，生成的氮化钼结构组成为β－Mo2N0．78．其生成机理与γ－Mo2N有类似之处．β－Mo2N0．78催化噻吩加氢脱硫反应的结果表明，β－Mo2N0．78催化剂对该反应有较高的催化活性，在360℃下，其活性比硫化钼催化剂高一倍左右．     

溶胶-凝胶法制备的铑基CO加氢制C2含氧化合物催化剂

用XRD,FT-IR,吸附CO的程序升温脱附(TPD),吸附CO的程序升温表面加氢反应(TPSR)等技术,并结合高压下CO加氢反应研究了用溶胶-凝胶法制备的铑基催化剂.结果表明,用溶胶-凝胶方法制备的催化剂中,Rh以极高的分散状态(主要以单原子形式)存在.与文献报道的浸渍法催化剂不同,CeO2的加入使甲醇选择性显著提高,但降低了催化剂的活性.CeO2对Rh的促进作用可能主要是CeO2与Rh产生了电子效应,即CeO2向Rh转移了电子.     

NO气体在TiO2表面的吸附行为

采用TPD (Temperature Programmed Desorption)试验方法测定了NO在TiO₂表面吸附后的脱附谱, 揭示了气体脱附量的变化规律. 结果表明, NO在TiO₂表面吸附后可在两个峰值温度450和980 K脱附出N₂气体, 其活化能分别是0.48 和2.5 eV. TiO₂表面经预覆氧处理后, N₂的脱附量降低. N₂的脱附量随NO气体暴露量增加而增加, 但当气体覆盖度超过一定值后, 脱附量趋于定值. 脱附峰值温度随气体暴露量的增加而降低.     

Direct Air Capture of CO2 by Physisorbent Materials

Sequestration of CO₂, either from gas mixtures or directly from air (direct air capture, DAC), could mitigate carbon emissions. Here five materials are investigated for their ability to adsorb CO₂ directly from air and other gas mixtures. The sorbents studied are benchmark materials that encompass four types of porous material, one chemisorbent, TEPA‐SBA‐15 (amine‐modified mesoporous silica) and four physisorbents: Zeolite 13X (inorganic); HKUST‐1 and Mg‐MOF‐74/Mg‐dobdc (metal–organic frameworks, MOFs); SIFSIX‐3‐Ni , (hybrid ultramicroporous material). Temperature‐programmed desorption (TPD) experiments afforded information about the contents of each sorbent under equilibrium conditions and their ease of recycling. Accelerated stability tests addressed projected shelf‐life of the five sorbents. The four physisorbents were found to be capable of carbon capture from CO₂‐rich gas mixtures, but competition and reaction with atmospheric moisture significantly reduced their DAC performance.     

制备方法及载体类型对Ni_2P/TiO_2催化剂加氢脱硫性能的影响

以两种类型的TiO2(锐钛矿anatase、晶须载体whiskers)为载体,分别采用程序升温还原(H2-TPR)法和溶剂热法制备Ni2P/TiO2催化剂,并用X射线衍射(XRD)、N2吸附比表面积(BET)测定、N2等温吸附脱附、CO吸附表征、X射线光电子能谱(XPS)技术、扫描电镜(SEM)对催化剂的结构和性质进行了表征。考察了不同的制备方法及不同类型TiO2载体对Ni2P/TiO2催化剂二苯并噻吩(DBT)加氢脱硫(HDS)性能的影响。结果表明,溶剂热法制备催化剂过程中,保持了TiO2晶体结构,抑制了TiPO4的形成,HDS活性高于H2-TPR法制备的催化剂;与锐钛矿TiO2为载体的催化剂相比,以晶须TiO2为载体的催化剂具有更优良的表面性质,能生成较多晶体颗粒粒径较小、分散性好的Ni2P活性相,具有更高的HDS活性。以晶须TiO2为载体,采用溶剂热法制备的Ni2P/TiO2催化剂,具有最好的加氢脱硫活性,在340℃、3.0MPa、氢油体积比为500、质量空速(WHSV)2.0h-1的条件下,二苯并噻吩转化率达到为98.2%。     

氧在银／二氧化硅催化剂上的超高真空程序升温脱附

 研究了氧在Ag／SiO2催化剂上的超高真空程序升温脱附．结果表明，脱附谱中出现了对应于表面分子氧（Tp＝340K）、体相氧（Tp＝570K）和次表层氧（Tp＝700～800K）的脱附峰．由于催化剂在制备过程中经过高温焙烧，因而其表面原子氧浓度低，脱附谱中未出现原子氧的脱附峰．高温焙烧还可使表面缺陷浓度增大，有利于原子氧向体相扩散，形成体相溶解氧，也有利于体相氧向表面扩散，所以对应于体相氧的570K脱附峰较强．体相氧和次表层氧向表面的扩散遵循不同的扩散机理．