溶剂对固相反应法制备H7PW12O42掺杂聚苯胺的影响

利用固相反应法,分别以微量的水和乙腈作为溶剂,制备了磷钨酸(H7PW12O42)掺杂聚苯胺,并以红外光谱(FTIR),电子扫描显微镜(SEM),X射线衍射(XRD),循环伏安(cyclic voltamogram)等测试方法对聚苯胺进行了表征。结果表明,固相反应法合成的聚苯胺分子链排列有序,晶化率较好,并且表现出有较好的电化学稳定性。而以微量的乙腈作为溶剂通过固相反应法得到的磷钨酸掺杂聚苯胺在颗粒形貌、结晶性、导电率等方面均优于相同条件微量的水作为溶剂时的掺杂聚苯胺。     

Comparative studies of solid‐state synthesized poly(o‐methoxyaniline) and poly (o‐toluidine)

Poly(o‐methoxyaniline) (POMA) and poly(o‐toluidine) (POT) salts doped with different acids (methanesulphonic acid (MeSA), trifluoroacetic acid (TFA), and hydrochloric acid (HCl)) were synthesized by using solid‐state polymerization method. The polymers were characterized by Fourier transform infrared (FTIR) spectra, ultraviolet–visible (UV–Vis) spectrometry, X‐ray diffraction (XRD), cyclic voltammetry (CV), and conductivity measurements. Transmission electron microscopy (TEM) was done to study the morphologies of POMA and POT salts. The FTIR and UV‐Vis absorption spectra revealed that the reduced phase was predominant in POMA salts, and the pernigraniline phase was predominant in POT salts. It was found that POMA salts displayed higher doping level and conductivity. In contrast, POT salts were lower at doping levels and conductivity. In accordance with these results, the electrochemical activity was also found to be lower in POT salts. The XRD patterns showed that the POMA salts displayed higher crystallinity than POT salts. The results from TEM revealed that the morphologies of POMA salts were different from those of POT salts. Copyright © 2008 John Wiley & Sons, Ltd.     

Interfacial synthesis and characterization of camphor sulfonic acid doped poly(aniline-co-2,5-dimethoxyaniline)

Polyaniline doped with camphor sulfonic acid, poly(2,5-dimethoxyaniline) and their copolymers were synthesized by interfacial method. The FT-IR spectra, UV-Vis absorption spectra and X-ray diffraction patterns were used to characterize the molecular structures of the polymers. The morphology of the polymers was studied by using SEM and TEM. Voltammetric study was done to investigate the electrochemical behavior of these polymers. The results show that the polymers were in microscale with the different shapes such as rod, flake and sphere, respectively. All the homopolymers and copolymers had a poor crystallinity. The conductivity of the copolymers of aniline with 2,5-dimethoxyaniline decreased with increase of 2,5-dimethoxy-aniline molar content.     

SiC粒子非均布引起铝基复合材料的损伤分析

 根据电镜断面考察结果，以Gurson模型为本构方程的有限单元 法对包体模型及三维非均匀模型进行了详细分析. 为了评价应力-应变 关系及损伤的主要因素，考虑了基体中SiC粒子的体积率和径比的非均 匀分布. 其结果表明，用这种非均匀模型能很好地仿真铝基体在大量塑 性变形之后所发生的韧窝破坏过程. SiC粒子体积率、径比及其位置的 非均匀性，对局部和整体损伤过程与应力-应变关系的影响相当大. 当 Sic粒子径比为1.0，并在基体中均匀分布时，断裂应变会大幅度增大.     

联苯二胺类与噻吩共聚物的金属配合物催化法合成

联苯二胺,3,3′-二甲基联苯二胺在二价镍配合物存在下,直接与2,5-二溴噻吩的格氏(Grignard)试剂共聚,用红外光谱、核磁共振等对共聚物进行了表征。该合成方法所得联苯二胺与噻吩共聚物、3,3′-二甲基联苯二胺与噻吩共聚物的收率分别为63．4％和70.8％。在25℃测得的特性粘度分别为O．75dL／g和O.67dL／g。聚合物的循环伏安测定表明该类聚合物具有一定的电化学活性,每种聚合物均在O～O．8V之问出现两对氧化一还原峰。紫外一可见吸收光谱测试结果表明共聚物分别在415nm和450nm处有最大吸收峰。     

碳纳米管-聚(3',4'-亚乙基二氧-2,2':5',2"-三噻吩)复合材料的制备及其电化学性能研究

通过Stille反应合成了3',4'-亚乙基二氧-2,2':5',2"-三噻吩(TET),并以其作为单体,采用化学氧化原位聚合方法在碳纳米管(CNT)的表面包覆新型聚(3',4'-亚乙基二氧.2,2':5',2"-三噻吩)(FTET),制备了PTET-CNT纳米复合材料.通过TEM、SEM和IR对其进行了表征,并利用循环伏安、交流阻抗、恒电流充放电等电化学测试方法,比较研究了复合材料以及碳纳米管在0.1 mol/L四乙基四氟硼酸铵(Et_4NPF_4)的乙腈溶液中的电化学行为.实验结果表明,在电流密度为3 mA/cm~2时,PTET-CNT复合材料的比电容为86 F/g,比原碳纳米管比电容20 F/g提高了3.3倍.基于这种复合材料的电容器的能量密度达到2.02 Wh/kg.     

四溴四苯基卟啉钯金属配合物的合成与功能研究

合成了７,８,１７,１８－四溴－５,１０、１５,２０－四苯基卟啉钯金属配合物,通过电子光谱,元素分析,ＩＲ,＾１Ｈ ＮＭＲ测定,确定配合物的组成,同时经放氢功能研究证明该配合物具有光敏性。     

固相反应法制备磷钼酸(H3PMo12O40)掺杂聚苯胺对其电化学活性的影响

利用固相反应法制备了磷钼酸(H3PMo12O40,简称PMA)掺杂聚苯胺,并以红外光谱(FT-IR)、X-射线衍射(XRD)、循环伏安(cyclic voltamm ogram)等测试方法对聚苯胺进行了表征。结果表明,无论是液相法还是固相法,磷钼酸掺杂于聚苯胺中,仍保持自身结构特征,与传统液相合成的磷钼酸掺杂聚苯胺相比,固相反应法合成的磷钼酸掺杂聚苯胺的晶化率和电活性略差。固相反应法制备的磷钼酸掺杂聚苯胺在对抗坏血酸(AH2)电催化氧化中,表现出比液相合成更好的电催化活性。     

硼铝共渗对T10钢性能的影响

对在不同条件下处理T10钢进行了磨损试验,氧化试验、腐蚀试验和B-Al共渗层的结合强度测试.结果表明,在比较之下B-Al共渗层的耐磨性,抗氧化性、耐蚀性和结合强度都比较高.     

固相反应法制备樟脑磺酸掺杂聚苯胺

固相合成;固相反应法制备樟脑磺酸掺杂聚苯胺