非均匀取代淀粉衍生物手性固定相的制备及其手性识别能力

通过区域选择性方法制备了两种新型淀粉衍生物,分别为淀粉2-苯甲酸酯-3-(4-甲基苯基氨基甲酸酯)-6-(3,5-二氯苯基氨基甲酸酯)和淀粉2-苯甲酸酯-3-(3,5-二氯苯基氨基甲酸酯)-6-(4-甲基苯基氨基甲酸酯),将二者分别涂覆于氨丙基硅胶后用作液相色谱手性固定相。研究表明:所制备的手性固定相显示出特异的手性识别能力,其手性识别能力明显高于均匀取代淀粉衍生物——淀粉三(3,5-二氯苯基氨基甲酸酯),取代基的性质及在葡萄糖单元上的位置对手性固定相的手性识别能力有较大的影响。一些未在商品化的手性柱Chiralpak AD上得到有效分离的手性化合物在所制备的固定相上得到了更好的分离。所测试的8对对映体在淀粉2-苯甲酸酯-3-(4-甲基苯基氨基甲酸酯)-6-(3,5-二氯苯基氨基甲酸酯)固定相上均得到了分离,因而此固定相的手性识别能力较强,具有潜在的应用价值。     

新型直链淀粉类手性固定相的制备与手性拆分性能

通过对糖单元2-位进行选择性酯化以及6-位保护与去保护,运用区域选择性方法合成了5种新型直链淀粉类衍生物,分别为直链淀粉-2-苯甲酸酯-3-(4-氯苯基氨基甲酸酯)-6-(3,5-二甲基苯基氨基甲酸酯)、直链淀粉-2-苯甲酸酯-3-(4-氯苯基氨基甲酸酯)-6-(3,5-二氯苯基氨基甲酸酯)、直链淀粉-2-苯甲酸酯-3,6-二(4-氯苯基氨基甲酸酯)、直链淀粉-2-(4-氯苯甲酸酯)-3,6-二(3,5-二氯苯基氨基甲酸酯)和直链淀粉-2-(4-氯苯甲酸酯)-3,6-二(环己基氨基甲酸酯),并将其涂覆在氨丙基硅胶表面制备了HPLC手性固定相。利用核磁共振-氢谱(¹H-NMR)和傅里叶变换红外光谱(FT-IR)技术对所合成衍生物的结构进行了表征和分析,并用HPLC法评价所合成衍生物的手性识别能力。与具有单一取代基直链淀粉类手性固定相的对比分析表明,所合成的新型直链淀粉类手性固定相对于某些对映体具有更为优异的拆分结果。进一步分析表明,2-、3-和6-位取代基的性能和引入位置对直链淀粉衍生物的手性识别能力均有较大的影响。     

壳聚糖苯甲酰化衍生物固定相的制备及其手性识别

为制备新型手性分离材料,用含不同取代基的苯甲酰氯修饰壳聚糖,合成了壳聚糖-二(4-甲基苯甲酸酯)-(4-甲基苯甲酰胺)、壳聚糖-二(苯甲酸酯)-(苯甲酰胺)、壳聚糖-二(3,5-二甲基苯甲酸酯)-(3,5-二甲基苯甲酰胺)和壳聚糖-二(4-氯苯甲酸酯)-(4-氯苯甲酰胺)4种新的衍生物,以N,N-二甲基甲酰胺为溶剂,将壳聚糖衍生物涂敷于大孔的3-氨丙基硅胶上,制得相应的手性固定相.测试了固定相的手性识别性能,结果表明这些固定相均有较好的对映体选择性.涂覆量为16%的固定相比涂覆量为20%的固定相有更好的手性分离性能,以壳聚糖-二(3,5-二甲基苯基甲酸酯)-(3,5-二甲基苯基甲酰胺)制备的固定相有最强的手性识别性能,以壳聚糖-二(4-甲基苯甲酸酯)-(4-甲基苯甲酰胺)制备的固定相对手性化合物有最大的分离度.     

高效液相色谱的4种商品手性柱对38种手性化合物的拆分研究

采用纤维素-三(3,5-二甲基苯基氨基甲酸酯)涂敷型手性固定相(Chiralcel OD柱)、直链淀粉-三(3,5-二甲基苯基氨基甲酸酯)涂敷型手性固定相(Chiralpak AD柱)、直链淀粉-三(3,5-二甲基苯基氨基甲酸酯)键合型手性固定相(Chiralpak IA柱)和Pirkle型的(S,S)-Whelk-01手性固定相对38种外消旋体化合物进行手性拆分。实验结果表明,4种固定相的手性识别能力为:OD>AD>IA>(S,S)-Whelk-01,OD固定相的手性识别率达到60%,并且它们之间的手性识别性能还具有一定的互补性。本研究对4种常用手性固定相的拆分能力进行了对比,为拆分手性化合物时有的放矢地选择手性固定相提供了参考。     

多糖类氨基甲酸酯衍生物的区域选择性合成及其手性识别

通过糖单元6-位羟基的保护和去保护,运用区域选择性方法合成了6种新型多糖类氨基甲酸酯衍生物,分别为纤维素/直链淀粉-[2,3-二(3,5-二甲基苯基)-6-环己基]氨基甲酸酯、[2,3-二(3,5-二氯苯基)-6-环己基]氨基甲酸酯及[2,3-二(4-氯苯基)-6-环己基]氨基甲酸酯,并将其涂敷在氨丙基硅胶的表面制备HPLC手性固定相.利用1H-NMR与FTIR光谱技术对所合成衍生物进行结构表征和分析,并应用HPLC法评价其对于9种手性化合物的手性识别能力.通过与以手性识别能力高而著称且含有单一取代基的纤维素/直链淀粉-三(3,5-二甲基苯基氨基甲酸酯)等手性固定相的对比分析表明,所合成新型手性固定相对于某些对映体显示出更优的手性识别能力.由进一步分析表明,糖单元2-、3-和6-位取代基的性能对于纤维素和直链淀粉氨基甲酸酯类衍生物的手性识别能力均具有较大影响.     

单硫代和双硫代甘油醚在直链淀粉-三（3,5-二甲基苯基氨基甲酸酯）固定相上的手性拆分

 合成了直链淀粉-三(3,5-二甲基苯基氨基甲酸酯）手性固定相。用该固定相对6种单硫 代 甘油醚和4 种双硫代甘油醚进行了手性拆分。单硫代甘油醚对映异构体得到了较好的分离, 而双硫代甘油醚完全不能拆分。提出了样品与固定相的作用模式。     

单硫代和双硫代甘油醚在直链淀粉-三（3,5-二甲基苯基氨基甲酸酯）固定相上的手性拆分

合成了直链淀粉三(3,5二甲基苯基氨基甲酸酯)手性固定相。用该固定相对6种单硫代甘油醚和4种双硫代甘油醚进行了手性拆分。单硫代甘油醚对映异构体得到了较好的分离,而双硫代甘油醚完全不能拆分。提出了样品与固定相的作用模式。     

淀粉及纤维素三(3-三氟甲基苯基氨基甲酸酯)手性固定相的制备及其性能评价

为了扩展多糖类手性固定相的种类,制备了基于淀粉及纤维素三(3-三氟甲基苯基氨基甲酸酯)的涂敷型手性固定相,以正己烷-异丙醇混合液为流动相,对8种手性化合物进行了高效液相色谱拆分。研究表明: 虽然与应用最广泛的分别以淀粉及纤维素三(3,5-二甲基苯基氨基甲酸酯)为手性选择因子的商品化手性柱Chiralpak AD和Chiralcel OD相比,所制备的手性固定相的手性分离能力较低,但纤维素三(3-三氟甲基苯基氨基甲酸酯)手性固定相显示出特异的手性识别能力,一些手性化合物在此固定相上得到了比在Chiracel OD上更好的分离;所制备的手性固定相的手性识别能力随流动相中异丙醇含量的降低而变好,当流动相中正己烷与异丙醇的体积比为95:5时所制备的手性固定相显示出相对较高的手性识别能力;总体来说,淀粉三(3-三氟甲基苯基氨基甲酸酯)手性固定相的手性识别能力稍强于纤维素三(3-三氟甲基苯基氨基甲酸酯)手性固定相,同时两种手性固定相的手性识别能力具有一定的互补性。     

纤维素-三(4-甲基苯甲酸酯)手性固定相的制备及其在拆分叔丁基亚磺酰胺对映体中的应用

分别在自制的纤维素-三(3,5-二甲基苯基氨基甲酸酯)(CDMPC)和纤维素-三(4-甲基苯甲酸酯)(CTMB)涂覆型固定相上对叔丁基亚磺酰胺对映体进行手性拆分,并考察了流动相中异丙醇的含量对手性拆分的影响。结果表明,叔丁基亚磺酰胺在CTMB固定相上的分离效果更佳。随着异丙醇含量的减少,叔丁基亚磺酰胺对映体在两根色谱柱上的分离度和保留时间均随之增加。对CTMB固定相进一步探究柱温的影响,结果表明较低的温度有利于对映体保持稳定的手性构型,更易于与固定相反应。     

高效液相色谱的8种商品手性柱对52种手性化合物的拆分研究

用8种手性柱纤维素-三(3,5-二甲基苯基氨基甲酸酯)涂敷型固定相(Chiralcel OD)、纤维素-三(3,5-二甲基苯基氨基甲酸酯)键合型固定相(Chiralpak IB)、直链淀粉-三(3,5-二甲基苯基氨基甲酸酯)涂敷型固定相(Chiralpak AD)、直链淀粉-三(3,5-二甲基苯基氨基甲酸酯)键合型固定相(Chiralpak IA)、直链淀粉-三((S)-α-甲基苄基氨基甲酸酯)涂敷型固定相(Chiralpak AS)、Pirkle型固定相((S,S)-Whelk-O1)、弱阴离子交换剂固定相(Chiralpak QN-AX)和替考拉宁固定相(Chirobitotic T柱)对52种外消旋体化合物进行了拆分,并讨论拆分条件对一些手性柱分离情况的影响。结果表明,这8根手性柱对这些对映体具有良好的手性识别效果和互补性。它们对这些样品手性拆分实验结果比较可得出其手性识别能力为:Chirobitotic TODADIAASIB(S,S)-Whelk-O1Chiralpak QN-AX。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.