苯乙烯-异戊二烯嵌段共聚物分子运动的脉冲核磁共振研究

用西德Bruker MSL-300核磁共振谱仪研究了三个不同系列的苯乙烯－异戊二烯嵌段共聚物的固体回波谱。用PASCAL语言在谱仪提供的计算机上、用线性最小二乘法回归分析把实验曲线分解成快速和慢速两个组分，它们分别对应于嵌段共聚物中刚性相和流动相，从而给出样品两相结构的定性定量信息。     

聚苯乙烯溶胀聚苯乙烯－聚丁二烯－聚苯乙烯三嵌段共聚物微区的研究

嵌段共聚物/均聚物共混体系,各嵌段会形成各自的相,并且嵌段间的连接点一定在两相之间的界面上,这一要求极大地影响了嵌段共聚物/均聚物共混体系的链构象和相行为.     

聚(苯乙烯-丁二烯-苯乙烯)三嵌段共聚物链结构的研究

<正> 以丁基锂引发二步加料法制备聚(苯乙烯-丁二烯-苯乙烯)三嵌段共聚物(简称SBS),往往在共聚物的中间链段聚丁二烯段中含有少量苯乙烯,即中间链段末端含有部份无规丁苯,得不到很纯的三嵌段共聚物,本文用超导核磁共振仪(H~1-NMR)、傅立叶红外光谱仪(FT-IR)、粘弹谱仪研究了上述SBS链结构,发现非嵌段苯乙烯芳环质子共振峰由二     

在平行板受限条件下AB两嵌段共聚物/纳米粒子复合物自组装行为的Monte Carlo模拟

采用Monte Carlo模拟方法研究了在平行板受限条件下A_(15)B_5非对称两嵌段共聚物与纳米粒子复合物的自组装行为,其中平行板对多组分嵌段A具有吸引相互作用.模拟结果表明,纳米粒子在两嵌段共聚物/纳米粒子复合物中的体积分数、嵌段共聚物不同嵌段与纳米粒子间的相互作用均对体系在平行板受限条件下的形貌结构及纳米粒子在体系中的分布有重要影响.当平行板间距一定时,未添加纳米粒子的A_(15)B_5非对称两嵌段共聚物中的A嵌段被吸附在平行板上形成层状相,而B嵌段则在平行板中形成六角堆积穿孔层状结构.加入与A嵌段不相容而与B嵌段相容的纳米粒子后,增加了纳米粒子与B嵌段的相容性,有利于保持B嵌段所形成的穿孔结构及孔洞尺寸,同时纳米粒子能够均匀地分散在B相区中.当引入的纳米粒子与A和B两嵌段均不相容时,降低纳米粒子与嵌段共聚物的不相容性同样有利于维持体系的穿孔结构.当纳米粒子与AB两嵌段共聚物间的排斥作用微弱时,即使含量较高,纳米粒子也不聚集,并且均匀分布在A相区与B相区的交界处.     

动态密度泛函理论在嵌段共聚物介观结构模拟中的应用

采用动态密度泛函理论(DDFT)方法对两嵌段和三嵌段共聚物熔体微相分离后的三维介观结构进行了模拟研究,考察了共聚物链长．N—12下组分A、B不同配比的11种两嵌段共聚物和10种三嵌段共聚物,通过等密度面图很好地表述了微相分离后的三维介观结构。通过比较序参数户、自由能F和熵S随时间的变化,发现当组分A与组分B的链节数之比．NA／NB和模拟参数均相同时,两嵌段共聚物熔体比三嵌段共聚物熔体容易发生微相分离,而三嵌段共聚物越不对称,微相分离越容易。     

环形两嵌段共聚物在软受限条件下自组装行为的Monte Carlo模拟

本文采用Monte Carlo模拟方法考察了环形两嵌段共聚物在软受限条件下的自组装行为。模拟结果表明通过调节嵌段比例,AB环形两嵌段共聚物能够在软受限条件下形成A、B呈交替排列层状相的蛹状粒子,A嵌段呈条带状环绕B相区的椭球粒子以及A嵌段呈块状六角堆积排布的补丁状粒子等多种有序结构。通过考察嵌段间的不相容性和嵌段的疏水性对体系聚集体形貌结构和自组装过程的影响,模拟结果给出了补丁状粒子这一具有特殊有序结构粒子的形成条件,即嵌段的疏水性较弱或不同种嵌段间的不相容性较强的体系中,少组分嵌段A易于在多组分嵌段B形成的连续相中形成具有块状微相结构的补丁状粒子。上述模拟结果能够为人们对环形两嵌段共聚物在纳米材料领域的潜在应用提供理论依据和新思路,使人们对环形两嵌段共聚物在三维软受限中的自组装行为有更进一步的了解。     

[-PPO-PDMS-PHS-]n三元多嵌段共聚物的形态结构和性能

利用DMA, TEM和SAXS对以聚苯醚(PPO)为硬段、聚对羟基苯乙烯(PHS)为半硬段和聚二甲基硅氧烷(PDMS)为软段的三元多嵌段共聚物[-PPO-PDMS-PHS-]n以三种嵌段相容相为连续相, PPO与PHS的相容相和PDMS相为两种分散相, 其tan δ随温度变化曲线在-100℃至200℃一直是一很高的平台, 并具有优异的力学性能, 较好地解决了含有机硅类嵌段共聚物强度低的弱点, 同时又保留了嵌段共聚物微相分离的特性。     

用于大分子定向自组装的新型嵌段共聚物的合成与表征

设计了具有高Flory-Huggins相互作用参数的嵌段共聚物聚(对叔丁基苯乙烯)-b-聚(甲基丙烯酸羟乙酯)(PtBS-b-PHEMA),并分别采用阴离子聚合和原子转移自由基聚合(ATRP)方式制备了不同嵌段比例、不同分子量的窄分子量分布的该嵌段共聚物。利用核磁共振分析了嵌段共聚物的组分,利用小角X射线散射(SAXS)分析了嵌段共聚物相分离后的尺寸及结构,对比研究了两种聚合方式对嵌段共聚物性能的影响。结果表明,采用阴离子聚合方式得到的嵌段共聚物分子量分布更窄,相同分子量下发生微相分离的尺寸更小,其在150℃真空烘箱中加热18h后可以形成尺寸为9.96nm的柱状相及8.42nm的层状相。     

用双官能团引发剂进行的基团转移嵌段共聚研究

本文用二种双官能团引发剂进行基团转移嵌段共聚研究,得到了一系列实测分子量和理论分子量相近、分子量分布较窄的A-B-A型嵌段共聚物。用GPC、~1H-NMR、DSC等手段对嵌段共聚物进行了表征,证明确是两相嵌段共聚丙烯酸酯。发现位阻较大的单体作为第二单体时不利于聚合。过高的催化剂用量使嵌段共聚的总转化率降低。使用极性较大的溶剂可缩短第一步聚合的诱导期,但不影响第二步聚合的诱导期,即极性较大的溶剂有利于催化剂的离解。单体浓度增大使共聚物的分子量减小,多分散性指数增大。可通过单体投料比改变共聚物的热形变温度。     

对称柔性-半刚性-柔性三嵌段共聚物自组装行为

基于蠕虫状链模型和高斯链模型的自洽场理论研究了对称柔性-半刚性-柔性三嵌段共聚物在二维空间中的相行为. 在设定的计算参数下得到了多种该体系的热力学平衡态相结构, 包括各向同性Isotropic相、 各向异性Nematic相、 层状Smectic-C相、 四角柱状相、 斜交型冰球状相、 断层型冰球状相和稻粒状结构. 与刚-柔两嵌段共聚物相比, 对称柔性-半刚性-柔性三嵌段共聚物更容易形成Smectic-C相. 在柱状相结构中, 在柔性嵌段的牵伸作用下半刚性嵌段在液晶相区中相互穿插, 从而形成菱形和长方形液晶相区. 当取向相互作用较强时, 半刚性嵌段沿长方形液晶相区的短边方向出现2次折叠. 为进一步探索高分子折叠现象产生的原因以及液晶成核机理奠定了理论基础.     

磨盘碾磨聚丙烯粒度分布与接枝率的研究

用分形几何方法研究了磨盘碾磨中聚丙烯 (PP)的粉碎和固相力化学接枝 .用粒度分析仪测定经磨盘碾磨聚丙烯的粒度分布 ,用分形理论处理实验数据 .结果表明 ,PP粒度分布存在无标度区 ,具有线性分形特征 ,磨盘碾磨对PP粒子分形行为有较大影响 ,聚丙烯粒度分布的分维值随碾磨次数的增加而增大 .磨盘碾磨中聚丙烯固相力化学接枝的实验结果表明 ,N 羟甲基丙烯酰胺在聚丙烯表面上的接枝率亦随碾磨次数增加而增加 ,即与聚丙烯粒度分布的分维值相关 .因此 ,可用分数维定量描述聚丙烯粒子在磨盘碾磨中的粉碎规律 ,揭示了N 羟甲基丙烯酰胺在聚丙烯表面固相力化学接枝反应的本质 .     

含芴共轭单元的超支化聚合物的合成及表征

以芴和季戊四醇为初始物,分别合成了具有芴共轭单元和季戊四醇多臂结构的两种聚合单体,进一步采用Suzuki反应合成出一种结构新颖的部分共轭结构的超支化聚合物.利用紫外吸收光谱和荧光发射光谱对聚合物予以表征,结果表明,超支化聚合物具有与模型化合物分子相似的发光行为,既可以发出纯正的蓝光,又表现出支化结构对荧光发射的影响.差...     

Exploring the crystallinity of different powder sugars through solid echo and magic sandwich echo sequences

Time-domain nuclear magnetic resonance techniques are frequently used in polymer, pharmaceutical, and food industries as they offer rapid experimentation and generally do not require any considerable preliminary sample preparation. Detection of solid and liquid fractions in a sample is possible with the free induction decay (FID). However, for the classical FID sequence that consists of a single pulse followed by relaxation decay acquisition, the dead time of the probe (ring out of resonance circuitry) occurs and varies between 5 and 15 μs for standard 10-mm tubes. In such a case, there arises a risk that the signal from the solid fraction cannot be detected correctly. To obtain quantitative measurement on crystalline and more mobile amorphous fractions, alternative sequences to the classical FID in the solid-state nuclear magnetic resonance were developed. Solid echo and magic sandwich echo sequences perform the relaxation decay refocusing somehow excluding the dead time problem and allow detection of the signal from the solid fraction. In this study, knowledge of amorphous/crystal fraction, which is obtained through solid echo and magic sandwich echo, has been explored on powder sugar samples for the purpose of developing a groundwork for a reliable quality control method. Different sugars were examined for the utilization of the sequences. What is important to add and make this study unique is that the method proposed did not involve multiparameter fitting of the “bead” pattern FID signal that normally suffers from ambiguity; just the integration of the fast Fourier transform of the solid echo was needed to calculate the second moment, (M₂).     

STUDIES ON MISCIBILITY AND MORPHOLOGICAL FEATURES OF BLENDS OF LC COPOLYESTER AND PET

The morphology of a special blend system composed of liquid crystalline aromatic random copolyester (LCP) and semiflexible polyester PET over the whole composition range has been studied by means of polarized microscope, density measurement, DSC, FTIR and SEM. Based on the microscopic observation, it is found that under suitable mechanical mixing condition, LCP may be rather homogeneously dispersed in the PET matrix, with the middle composition range of the contents of LCP at 30--70 wt % the anisotropic and isotropic phase segregation appears, while with LCP contents over 80 wt% the blends exhibit wholly anisotropie. The DSC thermographs of the melt-pressed and quenched films show single T_(?), T_(cc) and T_m. T_(?) increases with increasing content of LCP and ap, proaches to the T_(?) of pure LCP. The experimental results indicate that the two components of this blend system are miscible, there exist some specific interactions between them.     

聚乙二醇/二醋酸纤维素相变材料的组成与储能性能间的关系

以刚性的二醋酸纤维素 (CDA)链为骨架 ,接枝上聚乙二醇 (PEG)柔性链段 ,可得到一种具有固固相变性能的网状储能材料 .利用该材料的PEG支链从结晶态到无定形态间的相转变 ,可以实现储能和释能的目的 .具体研究了PEG的百分含量及PEG的分子量对材料储能性能的影响 .研究结果表明 ,通过改变PEG的百分含量与PEG的分子量 ,可以得到不同相变焓和不同相变温度的材料     

DETERMINATION OF THERMODYNAMIC AND KINETIC PARAMETERS OF LARGE SCALE CHROMATOGRAPHIC SEPARATION OF SUGAR AND REDUCING SUGAR

The parameter identification model of large scale chromatography separation process is proposed.The phase equilibrium constants and lumped mass transfer coefficients of sugar and reducing sugar adsorption on D1,D2 and D3 resins as well as the axial dispersion coefficients of the fluid through packed columns are determined by means of the pulse-response experiment technique with an inert substance as a tracer and the chromatography measuring technique.The elution curve calculated from these parameters is good agreement with the experimental elution curve.The sensitivity analysis of these parameters is carried out ,and the result shows that the elution curves of chromatography separation are more sensitive to the variations of the phase equilibrium relationship than to the variation of the axial dispersion as well as the lumped mass transfer coefficients.     

Formation and tribological properties of two‐component ultrathin ionic liquid films on Si

Several single‐component and two‐component imidazolium ionic liquids (ILs) ultrathin films were formed on Si substrates by a dip‐coating and heat treatment process. The formation and surface properties of the films were analyzed by means of ellipsometric thickness measurement, X‐ray photoelectron spectra and atomic force microscope. The adhesive and nanotribological behaviors of the films were evaluated by a homemade colloidal probe. A ball‐on‐plate tribometer was used to test the microtribological performances of these films. As a result, the two‐component ILs ultrathin film containing 80% solid‐like ILs phase shows more homogenous surface morphologies and optimal micro/nano‐tribological properties as compared to single‐component ILs films, which is ascribed to a synergic effect between the steady solid‐like ILs phase as the backbone and the proper amount of flowable liquid‐like ILs phase. By studying the influence of various solid/liquid ILs ratios on tribological properties of the two‐component ILs films, we might find the way to design ILs films with excellent comprehensive tribological properties. Copyright © 2010 John Wiley & Sons, Ltd.     

EFFECT OF COMPATIBILITY ON PHASE MORPHOLOGY AND ORIENTATION OF ISOTACTIC POLYPROPYLENE （IPP） BLENDS OBTAINED BY DYNAMIC PACKING INJECTION MOLDING

The effect of compatibility on phase morphology and orientation of isotactic polypropylene （iPP） blends under shear stress was investigated via dynamic packing injection molding （DPIM）. The compatibility of iPP blended with other polymers, namely, atactic polypropylene （aPP）, octane-ethylene copolymer （POE）, ethylene-propylene-diene rubber （EPDM） and poly（ethylene-co-vinyl acetate） （EVA）, have first been studied using dynamic mechanical analysis （DMA）. These blends were subjected to DPIM, which relies on the application of shear stress fields to the melt/solid interfaces during the packing stage by means of hydraulically actuated pistons. The phase morphology, orientation and mechanical properties of the injection-molded samples were characterized by SEM, 2D WAXS and Instron. For incompatible iPP/EVA blends, a much elongated and deformed EVA particles and a higher degree of iPP chain orientation were observed under the effect of shear. However, for compatible iPP/aPP blends, a less deformed and elongated aPP particles and less oriented iPP chains were deduced. It can be concluded that the compatibility between the components decreases the deformation and orientation in the polymer blends. This is most likely due to the hindering effect, resulting from the molecular entanglement and interaction in the compatible system.     

STUDY OF THE MOLECULAR MOTION AND COMPATIBILITY IN AB-CROSSLINKED POLYMER BASED ON POLYURETHANE AND POLYSTYRENE-co-ACRYLIC ACID BY SOLID STATE HIGH RESOLUTION NMR

The ~(13)C T_(1s) of --CH_3 side group in PPU/P (St-co-AA), AB-crosslinked polymers (i. e.ABCP) was studied by using high resolution solid state NMR. The rotation motion of --CH_3 sidegroup in PPU was analyzed by means of the average spectral density functions of internal rota-tion. The results showed that the rotation of the --CH_3 side group is related closely to the com-patibility between the two components. The compatibility was studied by analyzing the protonspin-lattice relaxation in rotating frame, spin-spin relaxation and spin-diffusion. The resultsshowed that the hydrogen bonds between the components play a major role in determining thecompatibility. Through spin diffusion studying, the soft phase domain size was calculated. Bystudying proton spin-spin relaxation, the content of each component in each phase and that ofeach phase in the samples can be obtained. The result shows that the content of interphase is related closely to the compatibility.